<
>
Specifications
Capacitance:
33nF
Tolerance:
±5%
Voltage Rating:
1kV
Mfr. Part #:
B82333J3AD30GB2000R
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
B82333J3AD30GB2000R
Product Description
Product Overview
The MMKP82 series is a box-type, double-sided metallized polypropylene film capacitor designed for high-frequency DC and pulse applications in electronic equipment. These capacitors are utilized for absorption and resonance functions. Key features include a non-inductive winding structure, flame-retardant plastic casing, and epoxy resin encapsulation, ensuring good dimensional consistency and low loss with minimal internal heating. Typical applications encompass switching power supplies, electronic ballasts, motor control, and TV vertical deflection circuits.
Product Attributes
- Brand: DGCX
- Product Series: MMKP82
- Type: Double-sided metallized polypropylene film capacitor (Boxed type)
- Construction: Non-inductive winding, double-sided metallized polypropylene film, metallized polyester film composite
- Encapsulation: Flame-retardant plastic casing (PBT) and flame-retardant epoxy resin
- Lead Material: Tinned copper wire
- Soldering Layer: Tin-zinc alloy wire
- Environmental Compliance: RoHS, REACH, Halogen-free (if required)
- Certifications: Flame-retardant UL94V-0 for encapsulation and casing
- Origin: Dongguan Chengxi Electronics Co., Ltd.
Technical Specifications
| Model/Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) @ 1KHz (%) | Dimensions (mm) W x H x T | Pitch (P) (mm) | Lead Diameter (d) (mm) | Lead Length (L) (mm) |
|---|---|---|---|---|---|---|---|---|
| MMKP82 0.033uF5% 1000V.dc P=15 (W18H13.5T7.5) | 0.033 | 5 | 1000 | 0.1 | 18.0 x 13.5 x 7.5 | 15.0 | 0.8 | 20.0 |
| B82333J3AD30GB2000R | 0.033 | 5 | 1000 | 0.1 | 18.0 x 13.5 x 7.5 | 15.0 | 0.8 | 20.0 |
| Specification | Technical Specification | Standard |
|---|---|---|
| Operating Temperature Range | -40C to +105C (Voltage derating applies above +85C) | GB 10190, IEC60384-16 |
| Climatic Category | 40/105/56 | - |
| Rated Temperature | +85C | - |
| Capacitance Range | 0.001F to 2.2F | - |
| Capacitance Tolerance Codes | G=2%; H=3%; J=5%; K=10% | - |
| Rated Voltage (VDC) | 250V, 400V, 630V, 1000V, 1600V, 2000V | - |
| Dielectric Strength | 1.6UR for 5 seconds | - |
| Insulation Resistance | 50000M for C0.33uF (100VDC, 60s) 10000M*uF for C>0.33uF (100VDC, 60s) | - |
| Maximum Pulse Rise Time (dV/dt) | Refer to datasheet for specific values based on voltage and pitch. | - |
| Storage Conditions | Temperature: Max 35C, Relative Humidity: Max 80% (Original packaging) | - |
| Storage Time | Maximum 12 months from production date | - |
| Test Item | Characteristic | Test Method |
|---|---|---|
| Terminal Strength | Tensile Strength: 10N, 10s Bending Strength: 5N, 90 x 2 times | Visual inspection, specific load/angle application |
| Solderability | Tinning rate 95% on lead wire | Soldering temperature: 2455C, Immersion time: 2.50.5s |
| Soldering Heat Resistance | Appearance: No visible damage DF increase: 0.002 Capacitance change: C/C 3% | Soldering temperature: 2605C, Immersion time: 101s |
| Rapid Temperature Change | Appearance: No visible damage | -40C to +105C, 5 cycles |
| Vibration | Appearance: No visible damage | Amplitude 0.75mm or 98m/s, Frequency 10-500Hz, 3 directions, 2h each |
| Shock | Appearance: No visible damage Capacitance change: C/C 3% DF increase: 0.002 Insulation Resistance change: IR/IR 50% | 4000 times, 390m/s, 6ms pulse duration |
| Damp Heat (Steady State) | Appearance: No visible damage Capacitance change: C/C 5% DF increase: 0.002 Insulation Resistance change: IR/IR 50% | 90-95%RH, 402C, 56 days |
| Endurance | Appearance: No visible damage Capacitance change: C/C 5% DF increase: 0.004 Insulation Resistance change: IR/IR 50% | 85C, 1000 hours, applied voltage: 1.25UR |
| Charge/Discharge | Capacitance change: C/C 5% DF increase: 0.005 Insulation Resistance change: IR/IR 50% | 10,000 cycles, specific charge/discharge times and voltages |
Usage Rules
- Operating Range: Do not exceed the upper category temperature limit. Avoid overload and exceeding maximum pulse current.
- Handling: Avoid repeated squeezing at the lead wire root. Be cautious of lead tip sharpness.
- Soldering:
- Wave Soldering: TP 110C (120s), Ts 120C (45s). For P7.5mm, T4mm, soldering time < 4s.
- Soldering Iron: Tip temperature 350C, time 3s.
- Not suitable for reflow soldering.
2501151750_DGCX-B82333J3AD30GB2000R_C42444191.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
