<
>
Specifications
Mfr. Part #:
MPP154J2SB05HC3F0ZR-H09
Package:
Through Hole,P=7.5mm
Key Attributes
Model Number:
MPP154J2SB05HC3F0ZR-H09
Product Description
Product Overview
The CBB21/MPP series capacitors are metallized polypropylene film capacitors with an impregnated, non-inductive wound structure. They feature a flame-retardant epoxy powder coating and are designed for various electronic applications. These capacitors are suitable for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. Key advantages include excellent self-healing properties, low loss, and reduced internal temperature rise.
Product Attributes
- Brand: Dongguan Chengxi Electronics Co., Ltd.
- Product Type: CBB21/MPP Type Metallized Polypropylene Film Capacitor (Impregnated Type)
- Origin: Guangdong, Heyuan City, Longchuan County, Shenzhen Bao'an (Longchuan) Industrial Transfer Industrial Park C1 Plot
- Material: Metallized Polypropylene Film, Tin-plated Copper Wire or Tin-plated Copper Clad Steel Wire, Zinc-tin Alloy, Flame-retardant Epoxy Resin Powder
- Certifications: RoHS, REACH, Halogen-free (if required)
- Environmental Compliance: RoHS, REACH
Technical Specifications
| Model/Product Code | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz) (%) | Dimensions (mm) (W*H*T) | Pitch (P) (mm) | Lead Length (L) (mm) | Lead Diameter (d) (mm) |
|---|---|---|---|---|---|---|---|---|
| MPP154J2SB05HC3F0ZR-H09 | 0.15 | 5 | 450 | 0.1 | 8.9*8.8*4.9 | 7.5 1.0 | 3.5 0.5 | 0.6 0.05 |
General Electrical Characteristics
| Parameter | Specification |
|---|---|
| Climate Category | 40/105/21 |
| Operating Temperature Range | -40~+105 (+85~+105: Rated voltage derating 1.25% / ) |
| Rated Temperature | 85 |
| Capacitance Range | 0.001F6.8F |
| Capacitance Tolerance | 5%(J), 10%(K) |
| Rated Voltage (VDC) | 100, 160, 250, 400, 630, 1000, 1250, 1600, 2000 |
| Dissipation Factor (DF) (1kHz, 20) | 0.0010 |
| Insulation Resistance | 30,000M for C0.33uF (100VDC , 60 seconds) 10000M*uF for C>0.33uF (100VDC , 60 seconds) |
| Withstand Voltage | 1.6UR(VDC), 5 seconds |
Maximum Pulse Rise Rate (dV/dt)
If the actual working voltage (U) is lower than the rated voltage (UR), the capacitor can operate at a higher dV/dt. The allowable dV/dt value should be multiplied by UR/U.
| dV/dt (V/s) | UR (VDC) | P=7.5 | P=10.0 | P=15.0 | P=22.5 | P=27.5 |
|---|---|---|---|---|---|---|
| 100/160 | 130 | 110 | 100 | 70 | 50 | |
| 250 | 240 | 220 | 200 | 120 | 100 | |
| 400/450 | 350 | 300 | 180 | 150 | ||
| 630 | 550 | 420 | 400 | 250 | 180 | |
| 1000/1250 | 2300 | 1950 | 975 | 600 | 300 | |
| 1600 / 6000 | 4500 | 2400 | / | / | ||
| 2000 / 8000 | 4500 | / | / |
Product Structure and Main Materials
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polypropylene Film | MPPZAH | -/- |
| 2 | Sprayed Gold Layer | Zinc-tin alloy wire | -/- |
| 3 | Leads | Tin-plated copper clad steel wire | -/- |
| 4 | Outer Encapsulation Material | Epoxy resin powder | Flame-retardant UL94V-0 |
| 5 | Inner Protective Material | Epoxy resin |
Packaging Specifications
| Inner Box Dimensions (L*W*H) | 34.5*23.5*24.5 cm |
| Outer Box Dimensions (L*W*H) | 49*36*27 cm |
| Packaging Details | Includes: Manufacturer's part number, number of packages and quantity per package, Lot No. Capacitors are packaged in transparent PVC bags for moisture and dust protection. RoHS environmental mark. Other customer marking requirements. |
Storage Conditions
| Temperature | 35 Max |
| Relative Humidity | 80% Max |
| Storage Time | Maximum 12 months (based on production date marked on the packaging bag) |
Environmental Characteristics
- Compliant with RoHS requirements
- Compliant with REACH requirements
- Compliant with Halogen-free requirements (if required)
Product Electrical Characteristics and Test Conditions
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength | No visible mechanical damage. Wire diameter: 0.6 & 0.8mm. Load: 10N, Time: 10 seconds. |
| Bending Strength | Wire diameter: 0.6 & 0.8mm. Force: 5N, 902 times. | ||
| 2 | Solder Adhesion | Tinning rate of leads 95% | Soldering temperature: 2455. Immersion time: 2.50.5 seconds. |
| 3 | Solderability Heat Resistance | Appearance | No visible damage. Soldering temperature: 2605. Immersion time: 101 seconds. Recovery time: 1-2 hours. |
| Increase in Dissipation Factor | 0.004 (C1.0F, 10kHz) 0.004 (C>1.0F, 1kHz) | ||
| Capacitance Change | C/C 3% | ||
| 4 | Initial Measurement | Capacitance (1KHz) | DF 0.001 (1kHz, 20) |
| Dissipation Factor | CR1F: Test Frequency 10kHz. CR>1F: Test Frequency 1kHz. | ||
| Temperature Rapid Change | Appearance | No visible damage. A=-40, B=+105, 5 cycles. Duration: t=30min. | |
| Vibration | Appearance | No visible damage. Amplitude 0.75mm or acceleration 98m/s (whichever is less severe), Frequency 10~500Hz. Three directions, mutually perpendicular, 2h per direction, total 6h. | |
| Shock | Appearance | No visible damage. 4000 times, acceleration 390m/s, pulse duration: 6ms. | |
| Final Measurement | Appearance | No visible damage. | |
| Capacitance Change | C/C 5% | ||
| Increase in Dissipation Factor | 0.004 | ||
| Insulation Resistance | IR/IR 50% | ||
| 5 | Initial Measurement | Capacitance (1KHz) | DF 0.001 (1kHz, 20) |
| Dissipation Factor | CR1F: Test Frequency 10kHz. CR>1F: Test Frequency 1kHz. | ||
| Climatic Sequence | Dry Heat | +105, 16 hours. | |
| Cyclic Damp Heat | Test Db, first cycle. | ||
| Cold | -40, 2 hours. | ||
| Low Pressure | No permanent breakdown, arcing, or harmful deformation of the casing; 8.5kPa, 1 hour. | ||
| Cyclic Damp Heat | Test Db, remaining cycles. | ||
| Final Measurement | Appearance | No visible damage. | |
| Capacitance Change | C/C 5% | ||
| Increase in Dissipation Factor | 0.005 | ||
| Insulation Resistance | IR/IR 50% | ||
| 6 | Steady State Damp Heat | Appearance | No visible damage. Relative humidity 9095%RH. Temperature: 402. No load, duration: 21 days. Recovery time: 1-2 hours. |
| Capacitance Change | C/C 5% | ||
| Increase in Dissipation Factor | 0.002 (C1.0F, 10kHz) 0.004 (C>1.0F, 1kHz) | ||
| Insulation Resistance | IR/IR 50% | ||
| 7 | Endurance | Appearance | No visible damage. T=85, 1000 hours. Applied voltage: 1.25UR. |
| Capacitance Change | C/C 8% | ||
| Increase in Dissipation Factor | 0.004 | ||
| Insulation Resistance | IR/IR 50% | ||
| 8 | Charge/Discharge | Capacitance Change | C/C 5% |
| Charge/Discharge Cycles | 10,000. Charging time: 0.5 seconds. Discharging time: 0.5 seconds. Charging voltage: Rated voltage UR. Charging resistance: 220/CR (). Discharging resistance: 10/CR or 20 (whichever is larger). CR: Rated capacitance (uF). | ||
| Increase in Dissipation Factor | 0.005 (10KHz, CR1.0uF). 0.005 (1KHz, CR>1.0uF). | ||
| Insulation Resistance | IR/IR 50% |
Usage Rules
- Usage Range: Do not exceed the upper limit category temperature. Avoid overload. Do not exceed the maximum pulse current during use.
- Operation Precautions: Avoid repeated squeezing at the lead root. Pay attention to the tip of the leads.
- Soldering: When soldering capacitors, solder heat is transferred to the capacitor core through the lead terminals and encapsulation layer. Therefore, attention must be paid to the attenuation or damage of the capacitor's electrical characteristics caused by high temperature and prolonged soldering.
- Wave Soldering: For MPP Polypropylene film capacitors: TP 110 for 120 seconds; Ts 120 for 45 seconds. For MPP Polypropylene film capacitors with P 7.5mm, T 4mm, wave soldering time < 4 seconds.
- Soldering Iron: When using a soldering iron, the tip temperature should not exceed 350, and the soldering time should not exceed 3 seconds.
- Lead-type film capacitors are not suitable for reflow soldering.
- Ts: Maximum temperature the capacitor body can withstand during wave soldering.
- Tp: Maximum preheating temperature the capacitor body can withstand.
Maximum Effective Voltage and Frequency Curve Diagram
Note: The curve diagram represents typical values tested under conditions of sinusoidal voltage, ambient temperature 85, and internal capacitor temperature rise T=10.
Product Electrical Characteristics Diagram
2512031620_DGCX-MPP154J2SB05HC3F0ZR-H09_C53070552.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
