<
>
Specifications
Capacitance:
10nF
Tolerance:
±5%
Voltage Rating:
1kV
Mfr. Part #:
B82103J3AD20GB200ZR
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
B82103J3AD20GB200ZR
Product Description
Product Overview
The MMKP82 series is a boxed, double-sided metallized polypropylene film capacitor designed for high-frequency DC and pulse applications in electronic equipment. These capacitors are utilized in absorption and resonance circuits, offering advantages such as a non-inductive structure, flame-retardant plastic casing and epoxy resin encapsulation for consistent appearance, and low loss with minimal internal temperature rise. Typical applications include switching power supplies, electronic ballasts, motor control, and TV vertical deflection circuits.
Product Attributes
- Brand: Not explicitly stated, but associated with Dongguan Chengxi Electronics Co., Ltd.
- Product Type: Boxed Double-Sided Metallized Polypropylene Film Capacitor
- Model Series: MMKP82
- Encapsulation: Flame-retardant plastic case and epoxy resin
- Lead Material: Tinned copper wire
- Termination: Tin-plated copper wire
- Construction: Double-sided metallized polypropylene film, non-inductive winding
- Certifications/Compliance: RoHS, REACH, Halogen-free (if required)
- Origin: Dongguan Chengxi Electronics Co., Ltd.
Technical Specifications
| Specification | Details |
|---|---|
| Product Code | B82103J3AD20GB200ZR |
| Model Name | MMKP82 |
| Capacitance | 0.01uF |
| Capacitance Tolerance | 5% |
| Rated Voltage (DC) | 1000V.dc |
| Pitch (P) | 15mm (W18H12T6) |
| Dimensions (WHT) | 18mm 12mm 6mm (typical for the specified model) |
| Lead Diameter (d) | 0.8mm (0.05mm) |
| Lead Length (L) | 20.0mm (2.0mm) |
| Operating Temperature Range | -40C to +105C |
| Rated Temperature | +85C |
| Capacitance Range | 0.001F to 2.2F |
| Capacitance Tolerance Codes | G=2%; H=3%; J=5%; K=10% |
| Rated Voltage (DC) Options | 250Vdc, 400Vdc, 630Vdc, 1000Vdc, 1600Vdc, 2000Vdc |
| Dissipation Factor (DF) (1KHz) | 0.1% at 20~25C |
| Insulation Resistance (IR) | 50000M for C0.33uF (100VDC, 60s) |
| Insulation Resistance (IR) | 10000M*uF for C>0.33uF (100VDC, 60s) |
| Dielectric Strength | 1.6UR for 5 seconds |
| Maximum Pulse Rise Time (dV/dt) | Refer to table in source document for specific values based on UR and P |
| Climate Category | 40/105/56 |
| Lead Type Code | B (Straight leads) |
| Lead Processing Code | T (Tape packing) |
| Packing | Inner carton: 34.5*23.5*24.5 cm; Outer carton: 49*36*27 cm |
| Storage Temperature | Max 35C |
| Storage Humidity | Max 80% RH |
| Maximum Storage Time | 12 months (from production date) |
| Terminal Strength (Tensile) | 10N, 10 seconds (for 0.6 & 0.8mm wire diameter) |
| Terminal Strength (Bending) | 5N, 90 x 2 times (for 0.6 & 0.8mm wire diameter) |
| Solderability | 95% tinning rate on leads |
| Soldering Heat Resistance | DF increase 0.002; C/C3% |
| Rapid Change of Temperature Test | No visible damage; 5 cycles (-40C to +105C) |
| Vibration Test | No visible damage; 2h per direction (3 directions) |
| Shock Test | No visible damage; 4000 cycles, 390m/s, 6ms pulse |
| Humidity Test (Steady State) | No visible damage; 56 days at 402C, 90-95% RH |
| Endurance Test | No visible damage; 1000 hours at 85C with 1.25UR applied |
| Charge/Discharge Test | C/C5%; DF increase 0.005 |
| Soldering Temperature (Iron) | Max 350C, 3 seconds |
2501151750_DGCX-B82103J3AD20GB200ZR_C42444180.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
