<
>
Specifications
Capacitance:
220nF
Tolerance:
±5%
Voltage Rating:
250V
Mfr. Part #:
MPP224J2ED050C040ZR
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
MPP224J2ED050C040ZR
Product Description
Product Overview
The CBB21/MPP series capacitors are designed for electronic equipment, featuring an epoxy-encapsulated metallized polypropylene film construction with a non-inductive winding structure. These capacitors are suitable for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. They offer excellent self-healing properties, low loss, and low internal temperature rise, with a flame-retardant epoxy resin powder coating.
Product Attributes
- Brand: DGCX
- Product Type: CBB21/MPP Type Metallized Polypropylene Film Capacitor (Impregnated)
- Origin: Dongguan, Guangdong, China
- Material: Metallized Polypropylene Film, Tin-plated Copper Wire, Tin-plated Copper Clad Steel Wire, Flame-retardant Epoxy Resin Powder
- Certifications: RoHS, REACH, Halogen-free (if required)
Technical Specifications
| Model | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz) (%) | Dimensions (mm) L (2.0) | Dimensions (mm) W (max) | Dimensions (mm) H (max) | Dimensions (mm) T (max) | Dimensions (mm) P (1.0) | Lead Diameter (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| MPP224J2ED050C040ZR | 0.22 | 5 | 250 | 0.1 | 16 | 8.6 | 4.6 | 15.0 | 4.0 | 0.6 |
General Electrical Characteristics
| Parameter | Specification | Test Method |
|---|---|---|
| Climate Category | 40/105/21 | |
| Operating Temperature Range | -40 to +105 (+85 to +105: Rated Voltage Derating 1.25% / ) | |
| Rated Temperature | 85 | |
| Capacitance Range | 0.001F to 6.8F | |
| Capacitance Tolerance | 5% (K), 10% (K) | |
| Rated Voltage | 100Vdc, 160Vdc, 250Vdc, 400Vdc, 630Vdc, 1000Vdc, 1250Vdc, 1600Vdc, 2000Vdc | |
| Loss Tangent (DF) | 0.0010 (1kHz, 20) | |
| Insulation Resistance | 30,000 M for C0.33uF (100VDC, 60 seconds) 10,000 M*uF for C>0.33uF (100VDC, 60 seconds) | |
| Withstand Voltage | 1.6 UR(VDC), 5 seconds | |
| Maximum Pulse Rise Rate (dV/dt) | Refer to table in original document for specific UR and P values. |
Product Structure and Main Materials
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polypropylene Film | MPPZAH | -/- |
| 2 | Sprayed Tin Layer | Zinc-tin alloy wire | -/- |
| 3 | Leads | Tin-plated copper clad steel wire | -/- |
| 4 | Outer Encapsulation Material | Epoxy resin powder | Flame retardant UL94V-0 |
| 5 | Inner Protective Material | Epoxy resin |
Packaging Specifications
| Item | Details |
|---|---|
| Inner Carton Dimensions (L*W*H) | 34.5*23.5*24.5 cm |
| Outer Carton Dimensions (L*W*H) | 49*36*27 cm |
| Carton Contents | Manufacturer's part number, package count, quantity per package, Lot No. |
| Packaging Method | Capacitors packaged in transparent PVC bags for moisture and dust protection. |
| Environmental Mark | RoHS |
Storage Conditions
| Parameter | Condition |
|---|---|
| Temperature | Max 35 |
| Relative Humidity | Max 80% |
| Storage Time | Maximum 12 months (based on production date marked on the packaging bag) |
Environmental Characteristics
- Compliant with RoHS requirements
- Compliant with REACH requirements
- Compliant with Halogen-free requirements (if required)
Product Electrical Characteristics and Test Conditions
| No. | Item | Characteristic | Test Method | |
|---|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength | No visible mechanical damage. Load: 10N, Time: 10 seconds. | |
| Bending Strength | Force: 5N, 90 2 times. | |||
| 2 | Solderability | Tinning rate of leads 95% | Soldering temperature: 2455, Immersion time: 2.50.5 seconds. | |
| 3 | Solder Heat Resistance | Appearance | No visible damage. Soldering temperature: 2605, Immersion time: 101 seconds. Recovery time: 1-2 hours. | |
| Dissipation Factor Increase | 0.004 (C1.0F, 10kHz); 0.004 (C>1.0F, 1kHz) | |||
| Capacitance Change | C/C3% | |||
| 4 | Initial Measurement | Capacitance (1KHz), Dissipation Factor | CR1F: Test frequency 10kHz; CR>1F: Test frequency 1kHz | |
| Temperature Rapid Change | Appearance | No visible damage. A=-40, B=+105, 5 cycles. Duration: t=30min. | ||
| Vibration | Appearance | No visible damage. Amplitude 0.75mm or acceleration 98m/s (whichever is less), frequency 10-500Hz, 3 directions, 2h each direction, total 6h. | ||
| Shock | Appearance | No visible damage. 4000 times, acceleration 390m/s, pulse duration: 6ms. | ||
| Final Measurement | Appearance | No visible damage. Capacitance Change: C/C5%. Dissipation Factor Increase: 0.004. Insulation Resistance: IR/IR50%. | ||
| 5 | Initial Measurement | Capacitance (1KHz), Dissipation Factor | CR1F: Test frequency 10kHz; CR>1F: Test frequency 1kHz | |
| Climatic Sequence | Appearance | No visible damage. Dry Heat +105, 16 hours; Cyclic Damp Heat Test Db, first cycle; Cold -40, 2 hours; Low Pressure 8.5kPa, 1 hour. Cyclic Damp Heat Test Db, remaining cycles. | ||
| Low Pressure | No permanent breakdown, arcing or harmful deformation of the casing. | |||
| Final Measurement | Appearance | No visible damage. Capacitance Change: C/C5%. Dissipation Factor Increase: 0.005. Insulation Resistance: IR/IR50%. | ||
| 6 | Damp Heat (Steady State) | Appearance | No visible damage. Relative Humidity 90-95%RH, Temperature: 402, No load, Duration: 21 days. Recovery time: 1-2 hours. | |
| Capacitance Change | C/C5% | |||
| Dissipation Factor Increase | 0.002 (C1.0F, 10kHz); 0.004 (C>1.0F, 1kHz) | |||
| Insulation Resistance | IR/IR50% | |||
| 7 | Endurance | Appearance | No visible damage. T=85, 1000 hours. Applied Voltage: 1.25UR. | |
| Capacitance Change | C/C8% | |||
| Dissipation Factor Increase | 0.004 | |||
| Insulation Resistance | IR/IR50% | |||
| 8 | Characteristic with Temperature | Capacitance measurement at points b, d, f. | Static method, capacitor held sequentially at each temperature: a.(202), b.(-403), d.(20 2), f.(1052), g.(202). | |
| Characteristic at lower category temperature -40: | 0(Cb-Cd)/Cd+3% | |||
| Characteristic at upper category temperature 105: | -4.0%(Cf-Cd)/Cd0 | |||
| 9 | Charge/Discharge | Capacitance Change | C/C5% | |
| Dissipation Factor Increase | 0.005 (10KHz, CR1.0uF); 0.005 (1KHz, CR>1.0uF) | |||
| Insulation Resistance | IR/IR50% |
Usage Rules
| Category | Details |
|---|---|
| Usage Range | Do not exceed the upper category temperature. Avoid overload. Do not exceed maximum pulse current. |
| Operation Precautions | Avoid repeated squeezing at the lead root. Pay attention to lead tips. |
| Soldering | Confirm soldering temperature within the following ranges: (1) Wave Soldering: TP110 for 120 seconds; Ts120 for 45 seconds. For MPP polypropylene film capacitors with P7.5mm, T4mm, wave soldering time < 4 seconds. (2) Soldering Iron: Tip temperature not exceeding 350, time not exceeding 3 seconds. (3) Lead film capacitors are not suitable for reflow soldering. Ts: Maximum temperature the capacitor body can withstand during wave soldering. Tp: Maximum preheating temperature the capacitor body can withstand. |
Maximum Effective Voltage vs. Frequency Curve
Note: The curve represents typical values tested under conditions of sinusoidal voltage, ambient temperature 85, and internal capacitor temperature rise T=10.
Product Electrical Characteristic Diagrams
Diagrams are available in the original document.
2504101957_DGCX-MPP224J2ED050C040ZR_C42460041.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
