<
>
Specifications
Mfr. Part #:
B82104H3AD70GC3F00R
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
B82104H3AD70GC3F00R
Product Description
Product Overview
The MMKP82 series is a box-type, double-sided metallized polypropylene film capacitor designed for high-voltage, high-frequency DC and pulse applications. Featuring a non-inductive winding structure, these capacitors are encapsulated in a flame-retardant plastic case and epoxy resin, ensuring good dimensional consistency and low loss. Typical applications include switching power supplies, electronic ballasts, motor control, and TV vertical deflection circuits.
Product Attributes
- Brand: DGCX
- Product Series: MMKP82
- Type: Box-type, Double-sided Metallized Polypropylene Film Capacitor
- Construction: Non-inductive winding structure with double-sided metallized polypropylene film and metallized polyester film composite.
- Encapsulation: Flame-retardant plastic case (PBT) and flame-retardant epoxy resin.
- Leads: Tin-plated copper wire.
- Color: Grey (Outer casing)
- Certifications: RoHS, REACH, Halogen-free (if required).
- Origin: Guangdong Heyuan City, Longchuan County, Shenzhen Bao'an (Longchuan) Industrial Transfer Industrial Park C1 Plot.
Technical Specifications
| Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (Vdc) | Dissipation Factor (DF) (1KHz) | Dimensions (mm) (L x W x T) | Pitch (P) (mm) | Lead Length (L) (mm) |
|---|---|---|---|---|---|---|---|
| B82104H3AD70GC3F00R | 0.1 | 3% | 1000 | 0.1% | 18.0 x 19.0 x 11.0 | 15.0 | 3.5 |
Electrical Characteristics
| Parameter | Specification | Test Conditions |
|---|---|---|
| Operating Temperature Range | -40 to +105 | (UR(dc): +85~+105: Voltage derating 1.25%/; UR(ac): +75 to +105: Voltage derating 1.35%/) |
| Climatic Category | 40/105/56 | |
| Rated Temperature | +85 | |
| Capacitance Range | 0.001F to 2.2F | |
| Capacitance Tolerance | G=2%; H=3%; J=5%; K=10% | |
| Rated Voltage (Vdc) | 250, 400, 630, 1000, 1600, 2000 | |
| Dissipation Factor (DF) | 0.1% | (1KHz at 20~25) |
| Insulation Resistance | 50000M for C0.33uF; 10000M*uF for C>0.33uF | (100VDC, 60 seconds) |
| Withstand Voltage | 1.6UR | 5 seconds |
| Max. Pulse Rise Time (dV/dt) | Refer to table in source document | (Dependent on working voltage and rated voltage) |
| Terminal Strength (Tensile) | No visible mechanical damage | Wire diameter: 0.6 & 0.8mm, Load: 10N, Time: 10 seconds |
| Terminal Strength (Bending) | Wire diameter: 0.6 & 0.8mm, Force: 5N, 90 x 2 times | |
| Solderability | 95% tinning rate on leads | Flux temp: 2455, Immersion time: 2.50.5 seconds |
| Solder Heat Resistance | No visible damage, DF increase 0.002, C/C 3% | Solder temp: 2605, Immersion time: 101 seconds, Recovery time: 1-2 hours |
| Rapid Temperature Change | No visible damage | A=-40, B=+105, 5 cycles, Duration: 30 min per step |
| Vibration | No visible damage | Amplitude 0.75mm or acceleration 98m/s, Frequency 10-500Hz, 3 directions, 2h each, total 6h |
| Shock | No visible damage | 4000 times, acceleration 390m/s, Pulse duration: 6ms |
| Climate Sequence | No permanent breakdown, arcing, or harmful deformation | Dry heat +105, 16h; Cyclic damp heat (DB); Cold -40, 2h; Low pressure 8.5kPa, 1h |
| Steady State Damp Heat | C/C 5%, DF increase 0.002, IR IR/IR 50% | 90-95% RH, 402, 56 days |
| Endurance | C/C 5%, DF increase 0.004, IR IR/IR 50% | 85, 1000 hours, Applied voltage: 1.25UR |
| Characteristics vs. Temperature | 0(Cb-Cd)/Cd+3% at -40; -4.0%(Cf-Cd)/Cd0 at 105 | Static method, temperatures: -40, +20, +105 |
| Charge/Discharge | C/C 5%, DF increase 0.005, IR IR/IR 50% | 10,000 cycles, Charge voltage: UR, Charge time: 0.5s, Discharge time: 0.5s |
Packaging Information
| Item | Dimensions (L x W x H) |
|---|---|
| Inner Carton | 34.5 x 23.5 x 24.5 cm |
| Outer Carton | 49 x 36 x 27 cm |
Packaging Details: Includes manufacturer part number, number of packages and quantity per package, Lot No. Capacitors are packed in transparent PVC bags for moisture and dust protection. RoHS environmental mark and other customer-specific markings are applied.
Storage Conditions
- Store in original packaging.
- Temperature: Max 35
- Relative Humidity: Max 80%
- Maximum storage time: 12 months from the production date marked on the packaging bag.
- Avoid prolonged exposure to air, which can degrade lead soldering performance.
- Avoid high temperature and high humidity environments.
Usage Rules
- Operating Range: Do not exceed the upper category temperature. Avoid overload and exceeding maximum pulse current.
- Handling: Avoid repeated squeezing at the lead root. Be mindful of lead tip sharpness.
- Soldering:
- Wave Soldering: TP 110 for 120s; Ts 120 for 45s. For P7.5mm, T4mm, soldering time < 4 seconds.
- Soldering Iron: Iron tip temperature not exceeding 350, time not exceeding 3 seconds.
- Note: Reflow soldering is not suitable for film capacitors with leads. Ts: Maximum temperature the component body can withstand during wave soldering. Tp: Maximum preheating temperature the component body can withstand.
2512091725_DGCX-B82104H3AD70GC3F00R_C53133384.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
