<
>
Specifications
Mfr. Part #:
MPP154J2EB040C030ZR
Package:
Through Hole,P=7.5mm
Key Attributes
Model Number:
MPP154J2EB040C030ZR
Product Description
Product Overview
The CBB21/MPP series metallized polypropylene film capacitors are designed for electronic equipment, featuring an epoxy encapsulation and a non-inductive winding structure. These capacitors are suitable for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. They offer excellent self-healing properties, low loss, and minimal internal temperature rise, with a flame-retardant epoxy resin powder coating.
Product Attributes
- Brand: Dongguan Chengxi Electronics Co., Ltd.
- Product Type: Metallized Polypropylene Film Capacitor (Impregnated Type)
- Series: CBB21/MPP
- Construction: Non-inductive winding, metallized polypropylene film
- Encapsulation: Flame-retardant epoxy resin powder coating
- Lead Material: Tinned copper clad steel wire
- Origin: Guangdong, China
- Certifications: RoHS, REACH, Halogen-free (upon request)
Technical Specifications
| Model | Capacitance (F) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz) | Dimensions (mm) (W*H*T) | Pitch (P) (mm) | Lead Length (L) (mm) | Diameter (d) (mm) |
|---|---|---|---|---|---|---|---|---|
| MPP154J2EB040C030ZR | 0.15 | 5 | 250 | 0.1 | 9.5*10.0*5.2 | 7.5 1.0 | 3.0 0.5 | 0.6 0.05 |
General Electrical Characteristics
| Parameter | Specification | Test Condition |
|---|---|---|
| Climate Category | 40/105/21 | |
| Operating Temperature Range | -40 to +105 | (+85 to +105: Rated voltage derating 1.25% / ) |
| Rated Temperature | 85 | |
| Capacitance Range | 0.001F to 6.8F | |
| Capacitance Tolerance | 5% (J), 10% (K) | |
| Rated Voltage | 100, 160, 250, 400, 630, 1000, 1250, 1600, 2000 Vdc | |
| Dissipation Factor (DF) | 0.0010 | 1KHz, 20 |
| Insulation Resistance | 30,000 M (for C0.33F) | 100VDC, 60 seconds |
| Insulation Resistance | 10,000 M*F (for C>0.33F) | 100VDC, 60 seconds |
| Withstand Voltage | 1.6 UR(VDC) | 5 seconds |
Product Structure and Main Materials
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polypropylene Film | MPPZAH | -/- |
| 2 | Spray-welding Layer | Zinc-tin alloy wire | -/- |
| 3 | Lead Wire | Tinned copper clad steel wire | -/- |
| 4 | Outer Encapsulation Material | Epoxy resin powder | Flame-retardant UL94V-0 |
| 5 | Inner Protective Material | Epoxy resin | |
| All raw materials and finished products comply with RoHS environmental requirements. |
Packaging Information
- Inner Box Dimensions: L*W*H = 34.5*23.5*24.5 cm
- Outer Box Dimensions: L*W*H = 49*36*27 cm
- Packaging Details: Includes manufacturer part number, number of packages, and quantity per package, Lot No.
- Capacitors are packaged in transparent PVC bags for moisture and dust protection.
- RoHS environmental mark is applied.
- Other customer marking requirements can be accommodated.
Storage Conditions
- Avoid prolonged exposure to air, which can degrade lead wire solderability.
- Do not store in high temperature or high humidity environments.
- Storage Conditions: Temperature: Max 35, Relative Humidity: Max 80% (when stored in original packaging).
- Storage Time: Maximum 12 months (based on production date marked on the packaging bag).
Environmental Characteristics
- Complies with RoHS requirements.
- Complies with REACH requirements.
- Complies with Halogen-free requirements (if requested).
Product Electrical Characteristics and Test Conditions
Unless otherwise specified, tests are conducted within standard atmospheric conditions: Ambient Temperature: 1535, Relative Humidity: 25%75%. For any questions regarding test results, testing is performed under the following limits: Ambient Temperature: 202, Relative Humidity: 60%70%.
Detailed Electrical Characteristics & Test Methods
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength | No visible mechanical damage. Wire diameter: 0.6 & 0.8mm. Load: 10N, Duration: 10 seconds. |
| Bending Strength | Wire diameter: 0.6 & 0.8mm. Force: 5N, 90 2 times. | ||
| Solderability | Tinning rate of lead wire: 95%. Solder temperature: 2455. Immersion time: 2.50.5 seconds. | ||
| 2 | Solder Heat Resistance | Appearance | No visible damage. Solder temperature: 2605. Immersion time: 101 seconds. Recovery time: 1-2 hours. |
| Dissipation Factor Increase | 0.004 (C1.0F, 10kHz) or 0.004 (C>1.0F, 1kHz) | ||
| Capacitance Change | C/C 3% | ||
| Initial Measurement | Capacitance (1KHz), Dissipation Factor | CR1F: Test frequency 10kHz; CR>1F: Test frequency 1kHz. | |
| 3 | Temperature Rapid Change | Appearance | No visible damage. A=-40, B=+105, 5 cycles. Duration: t=30min. |
| Vibration | No visible damage. Amplitude 0.75mm or acceleration 98m/s (whichever is smaller), frequency 10-500Hz. Three directions, mutually perpendicular, 2h per direction, total 6h. | ||
| Shock | No visible damage. 4000 times, acceleration 390m/s, pulse duration: 6ms. | ||
| Final Measurement | Appearance, Capacitance Change (C/C 5%), Dissipation Factor Increase (0.004), Insulation Resistance (IR/IR 50%) | ||
| Initial Measurement | Capacitance (1KHz), Dissipation Factor | CR1F: Test frequency 10kHz; CR>1F: Test frequency 1kHz. | |
| 4 | Climatic Sequence | Dry Heat | +105, 16 hours. |
| Cyclic Damp Heat | Test Db, first cycle. | ||
| Cold | -40, 2 hours. | ||
| Low Pressure | No permanent breakdown, arcing, or harmful deformation of the case. 8.5kPa, 1 hour. | ||
| Cyclic Damp Heat | Test Db, remaining cycles. Final Measurement: Appearance, Capacitance Change (C/C 5%), Dissipation Factor Increase (0.005), Insulation Resistance (IR/IR 50%). | ||
| 5 | Steady State Damp Heat | Appearance | No visible damage. Relative Humidity: 90-95%RH. Temperature: 402. No load, duration: 21 days. Recovery time: 1-2 hours. |
| Capacitance Change | C/C 5% | ||
| Dissipation Factor Increase | 0.002 (C1.0F, 10kHz) or 0.004 (C>1.0F, 1kHz) | ||
| Insulation Resistance | IR/IR 50% | ||
| 6 | Endurance | Appearance | No visible damage. T=85, 1000 hours. Applied voltage: 1.25UR. |
| Capacitance Change | C/C 8% | ||
| Dissipation Factor Increase | 0.004 | ||
| Insulation Resistance | IR/IR 50% | ||
| 7 | Charge/Discharge | Capacitance Change | C/C 5% |
| Charge/Discharge Cycles | 10,000 | Charging time: 0.5s, Discharging time: 0.5s, Charging voltage: Rated voltage UR, Charging resistance: 220/CR (), Discharging resistance: 10/CR or 20 (whichever is larger). CR: Rated capacitance (F). | |
| Dissipation Factor Increase | 0.005 (10KHz, CR1.0uF) or 0.005 (1KHz, CR>1.0uF) | ||
| Insulation Resistance | IR/IR 50% |
Usage Rules
- Usage Range: Do not exceed the upper limit category temperature. Avoid overload usage. Do not exceed the maximum pulse current during use.
- Operation Precautions: Avoid repeated squeezing at the lead wire root. Pay attention to the tip of the lead wires.
- Soldering: When soldering capacitors, solder heat is transferred through the lead terminals and encapsulation layer to the capacitor core. Therefore, be cautious of capacitor electrical characteristic degradation or damage caused by high temperatures and prolonged soldering.
- Soldering Temperature Range:
- Wave Soldering: MPP Polypropylene film capacitors: TP 110 for 120 seconds; Ts 120 for 45 seconds. For MPP Polypropylene film capacitors with P 7.5mm, T 4mm, wave soldering time < 4 seconds.
- Soldering Iron: If using a soldering iron, the tip temperature should not exceed 350, and the soldering time should not exceed 3 seconds.
- Lead wire film capacitors are not suitable for reflow soldering.
- Ts: Maximum temperature the capacitor body can withstand during wave soldering.
- Tp: Maximum temperature the capacitor body can withstand during the preheating stage.
Maximum Effective Voltage vs. Frequency Curve
Note: The typical values in the curve diagram are tested under conditions of sinusoidal voltage, ambient temperature 85, and capacitor internal temperature rise T=10.
Product Electrical Characteristics Diagram
(Diagram not provided in source text)
2512031620_DGCX-MPP154J2EB040C030ZR_C53070551.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
