<
>
Specifications
Capacitance:
100nF
Tolerance:
±5%
Voltage Rating:
100V
Mfr. Part #:
MPP104J2AB030C3F0ZR
Package:
Through Hole
Key Attributes
Model Number:
MPP104J2AB030C3F0ZR
Product Description
Product Overview
The CBB21/MPP series capacitors are metallized polypropylene film capacitors with a non-inductive wound structure, designed for electronic equipment. They feature an epoxy encapsulation and are suitable for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. Key advantages include excellent self-healing properties due to the metallized polypropylene film, low loss, and minimal internal temperature rise, all encapsulated in flame-retardant epoxy resin powder coating.
Product Attributes
- Brand: DGCX (Company Trademark)
- Origin: Dongguan, Guangdong Province, China
- Series: CBB21/MPP
- Type: Metallized Polypropylene Film Capacitor (Impregnated Type)
- Encapsulation: Flame-retardant epoxy resin powder coating
- Internal Material: Epoxy resin
- Lead Material: Tinned copper clad steel wire
- RoHS Compliance: Yes
- REACH Compliance: Yes
- Halogen-Free: Available upon request
Technical Specifications
| Model/Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (V.dc) | Dielectric Loss (DF) (1KHz, 20C) | Dimensions (mm) (L x W x H) | Pitch (P 1.0) | Lead Diameter (d 0.05) |
|---|---|---|---|---|---|---|---|
| MPP104J2AB030C3F0ZR | 0.1 | 5% | 100 | 0.0010 | 9.0 x 7.3 x 3.4 | 7.5 | 0.6 |
General Electrical Characteristics
| Parameter | Specification | Test Conditions |
|---|---|---|
| Climate Category | 40/105/21 | - |
| Operating Temperature Range | -40 to +105 | (Derating factor 1.25% / for +85 to +105) |
| Rated Temperature | 85 | - |
| Capacitance Range | 0.001F to 6.8F | - |
| Capacitance Tolerance | 5% (K), 10% (M) | - |
| Rated Voltage (Vdc) | 100, 160, 250, 400, 630, 1000, 1250, 1600, 2000 | - |
| Dissipation Factor (DF) | 0.0010 | 1kHz, 20 |
| Insulation Resistance | 30,000 M for C 0.33uF 10,000 M*uF for C > 0.33uF | 100VDC, 60 seconds |
| Dielectric Strength | 1.6 UR(VDC) | 5 seconds |
| Max. Pulse Rise Time (dV/dt) | See chart in original document | Dependent on UR and Pitch (P) |
Product Structure and Main Materials
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polypropylene Film | MPPZAH | - |
| 2 | Sprayed Layer | Zinc-tin alloy wire | - |
| 3 | Lead Wire | Tinned copper clad steel wire | - |
| 4 | Outer Encapsulation Material | Epoxy resin powder | Flame retardant UL94V-0 |
| 5 | Inner Protective Material | Epoxy resin | - |
Marking Description (Example)
| Marking | Description |
|---|---|
| DGCX | Company Trademark |
| MPP | Product Model or Model Code |
| 105J | Rated Capacitance and Tolerance |
| 250V | Rated Voltage (V.dc) |
Packaging Information
| Item | Dimensions (L*W*H) |
|---|---|
| Inner Carton | 34.5*23.5*24.5 cm |
| Outer Carton | 49*36*27 cm |
| Packaging Details | Transparent PVC bag for moisture and dust protection; RoHS environmental mark; Customer specific markings. |
Storage Conditions
| Condition | Specification |
|---|---|
| Temperature | Max 35 |
| Relative Humidity | Max 80% |
| Storage Duration | Max 12 months (from production date on packaging bag) |
Environmental Characteristics
- RoHS Compliance
- REACH Compliance
- Halogen-Free (if required)
Product Electrical Characteristics and Test Conditions
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength Bending Strength | No visible mechanical damage Wire diameter: 0.6&0.8mm, Load: 10N, Time: 10s Wire diameter: 0.6&0.8mm, Force: 5N, 902 times |
| 2 | Solderability | Solderability rate on lead | Soldering temperature: 2455, Immersion time: 2.50.5s, Rate 95% |
| 3 | Solder Heat Resistance | Appearance Capacitance Change DF Increase | No visible damage Soldering temperature: 2605, Immersion time: 101s, Recovery time 1-2 hours C/C 3% DF 0.004 (C1.0F, 10kHz) DF 0.004 (C>1.0F, 1kHz) |
| 4 | Temperature Rapid Change | Appearance Capacitance Change | No visible damage A=-40, B=+105, 5 cycles, Duration: 30min C/C 5% |
| 5 | Vibration | Appearance Capacitance Change DF Increase Insulation Resistance | No visible damage Amplitude 0.75mm or acceleration 98m/s (whichever is smaller), Frequency 10-500Hz, 3 directions, 2h each direction, total 6h C/C 5% DF Increase 0.004 IR/IR 50% |
| 6 | Shock | Appearance Capacitance Change DF Increase Insulation Resistance | No visible damage 4000 times, acceleration 390m/s, pulse duration 6ms C/C 5% DF Increase 0.004 IR/IR 50% |
| 7 | Climatic Sequence | Appearance Capacitance Change DF Increase Insulation Resistance | No visible damage Dry Heat +105, 16h; Cyclic Damp Heat Test Db, 1st cycle; Cold -40, 2h; Low pressure 8.5kPa, 1h; Cyclic Damp Heat Test Db, remaining cycles C/C 5% DF Increase 0.005 IR/IR 50% |
| 8 | Damp Heat (Steady State) | Appearance Capacitance Change DF Increase Insulation Resistance | No visible damage RH 90-95%, Temp: 402, 21 days, Recovery time 1-2 hours C/C 5% DF 0.002 (C1.0F, 10kHz) DF 0.004 (C>1.0F, 1kHz) IR/IR 50% |
| 9 | Endurance | Appearance Capacitance Change DF Increase Insulation Resistance | No visible damage Temp: 85, 1000 hours, Applied Voltage: 1.25UR C/C 8% DF Increase 0.004 IR/IR 50% |
| 10 | Characteristics Dependent on Temperature | Capacitance measurement at points b, d, f | At lower category temperature -40: 0 (Cb-Cd)/Cd +3% At upper category temperature 105: -4.0% (Cf-Cd)/Cd 0 Static method, capacitor held at each temperature sequentially: a.(202), b.(-403), d.(20 2), f.(1052), g.(202) |
| 11 | Charge/Discharge | Capacitance Change DF Increase Insulation Resistance | C/C 5% Charge/Discharge cycles: 10,000 Charging time: 0.5s, Discharging time: 0.5s Charging voltage: Rated voltage UR Charging resistance: 220/CR () Discharging resistance: 10/CR or 20 (whichever is larger) CR: Rated capacitance (uF) DF 0.005 (10KHz, CR1.0uF) DF 0.005 (1KHz, CR>1.0uF) IR/IR 50% |
Usage Rules
- Usage Range: Do not exceed upper category temperature; Avoid overload; Do not exceed maximum pulse current.
- Handling Precautions: Avoid repeated squeezing at the lead wire root; Pay attention to the lead wire tip.
- Soldering: Solder heat can transfer to the capacitor core. Ensure solder temperature is within limits to prevent damage or characteristic decay.
- Soldering Temperatures:
- Wave Soldering (MPP Polypropylene Film Capacitors): TP 110 for 120s; Ts 120 for 45s. For P7.5mm, T4mm, wave soldering time < 4 seconds.
- Soldering Iron: Tip temperature not exceeding 350, time not exceeding 3 seconds.
- Lead film capacitors are not suitable for reflow soldering.
- Definitions: Ts: Maximum temperature the capacitor body can withstand during wave soldering. Tp: Maximum preheating temperature the capacitor body can withstand.
Maximum Effective Voltage vs. Frequency Curve
Note: Typical values are tested under conditions of sinusoidal voltage, ambient temperature 85, and internal temperature rise T=10.
Product Electrical Characteristic Diagrams
(Diagrams are referenced in the original document, content not provided here.)
2505291610_DGCX-MPP104J2AB030C3F0ZR_C49002967.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
