Product Overview
The MMKP82 series is a box-type, double-sided metallized polypropylene film capacitor designed for absorbing, resonating, and high-frequency DC and pulse applications in electronic equipment. These capacitors feature a non-inductive winding structure using double-sided metallized polyester film combined with metallized polypropylene film. They are encapsulated in flame-retardant plastic cases and epoxy resin, offering good dimensional consistency, low loss, and minimal internal temperature rise. Typical applications include switching power supplies, electronic ballasts, motor control, and TV vertical deflection circuits.
Product Attributes
- Brand: DGCX
- Product Series: MMKP82
- Type: Double-sided metallized polypropylene film capacitor (Box type)
- Encapsulation: Flame-retardant plastic case and epoxy resin
- RoHS Compliance: Yes
- REACH Compliance: Yes
- Halogen-Free: Available upon request
- Origin: Dongguan City Chengxi Electronics Co., Ltd.
Technical Specifications
| Model/Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz) | Dimensions (mm) W (0.5) | Dimensions (mm) H (0.5) | Dimensions (mm) T (0.5) | Pitch (P) (1.0) | Lead Length (L) (2.0) | Lead Diameter (d) 0.05 | Lead Type |
|---|---|---|---|---|---|---|---|---|---|---|---|
| B82683J3AD40GB2000R | 0.068 | 5% | 1000 | 0.1% | 18.0 | 14.5 | 8.5 | 15.0 | 20.0 | 0.8 | B (Straight leads) |
General Electrical Characteristics
| Parameter | Specification |
|---|---|
| Operating Temperature Range | -40C to +105C (Voltage derating required above +85C) |
| Climate Category | 40/105/56 |
| Rated Temperature | +85C |
| Capacitance Range | 0.001F to 2.2F |
| Capacitance Tolerance Codes | G=2%; H=3%; J=5%; K=10% |
| Rated Voltage (VDC) | 250, 400, 630, 1000, 1600, 2000 VDC |
| Dissipation Factor (DF) | 0.1% (1KHz at 20~25C) |
| Insulation Resistance | 50000M for C0.33uF (100VDC, 60s) 10000M*uF for C>0.33uF (100VDC, 60s) |
| Dielectric Strength | 1.6UR for 5 seconds |
| Maximum Pulse Rise Rate (dV/dt) | Refer to table in document (dependent on UR and P value) |
Product Structure and Main Materials
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polypropylene Film / Metallized Polyester Film / Polypropylene Film | MPAT/MMPEA/PP | - |
| 2 | Tin-Zinc Alloy Wire | Spray welding layer | - |
| 3 | Tinned Copper Wire | Lead wire | - |
| 4 | Epoxy Resin | Potting material | Flame retardant UL94V-0 |
| 5 | PBT Plastic Case | Outer protective material | Flame retardant UL94V-0 (Gray) |
Packaging Information
| Item | Specification |
|---|---|
| Inner Box Dimensions (L*W*H) | 34.5*23.5*24.5 cm |
| Outer Box Dimensions (L*W*H) | 49*36*27 cm |
| Packaging Details | Includes manufacturer P/N, number of packages, quantity per package, Lot No. Capacitors are packed in transparent PVC bags for moisture and dust protection. RoHS environmental mark included. |
Storage Conditions
| Item | Specification |
|---|---|
| Temperature | Max 35C |
| Relative Humidity | Max 80% |
| Storage Duration | Maximum 12 months from production date (marked on packaging bag) |
Environmental Characteristics
- Compliant with RoHS requirements.
- Compliant with REACH requirements.
- Compliant with Halogen-Free requirements (if specified).
Product Electrical Characteristics and Test Conditions
Unless otherwise specified, tests are conducted under standard atmospheric conditions: Ambient Temperature: 15C35C, Relative Humidity: 25%75%. For critical results, tests are performed at: Ambient Temperature: 202C, Relative Humidity: 60%70%.
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength, Bending Strength | (Details in document) |
| 2 | Solderability | Solder coverage rate 95% on leads | (Details in document) |
| 3 | Soldering Heat Resistance | Appearance, DF increase, Capacitance change | (Details in document) |
| 4 | Thermal Shock | Appearance, Capacitance change, DF increase | -40C to +105C, 5 cycles |
| 5 | Vibration | Appearance, Capacitance change, DF increase, Insulation Resistance | (Details in document) |
| 6 | Shock | Appearance, Capacitance change, DF increase, Insulation Resistance | 4000 times, 390m/s, 6ms pulse |
| 7 | Climatic Sequence | Appearance, Capacitance change, DF increase, Insulation Resistance | (Details in document) |
| 8 | Damp Heat (Steady State) | Appearance, Capacitance change, DF increase, Insulation Resistance | +40C, 90-95%RH, 56 days |
| 9 | Endurance | Appearance, Capacitance change, DF increase, Insulation Resistance | +85C, 1000 hours, 1.25UR applied voltage |
| 10 | Characteristics Dependent on Temperature | Capacitance measurement at specific temperatures | -40C, +20C, +105C |
| 11 | Charge/Discharge | Capacitance change, DF increase, Insulation Resistance | 10,000 cycles (Details in document) |
Usage Rules
- Operating Range: Do not exceed upper category temperature. Avoid overload and maximum pulse current.
- Handling: Avoid repeated squeezing at the lead root. Be cautious of lead tips.
- Soldering: Solder iron tip temperature should not exceed 350C for no more than 3 seconds. For wave soldering, refer to specific temperature and time limits (TP 110C/120s, Ts 120C/45s; for P7.5mm, T4mm, time < 4s). Not suitable for reflow soldering.
Curves
Effective Voltage vs. Frequency Characteristic Curve (Page 12)
Effective Current vs. Frequency Characteristic Curve (Page 13)
Product Electrical Characteristic Diagram (Page 14)
2501151750_DGCX-B82683J3AD40GB2000R_C42444198.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
