<
>
Specifications
Capacitance:
100nF
Tolerance:
±5%
Voltage Rating:
630V
Mfr. Part #:
MPP104J2JB040C4F0ZR
Package:
Through Hole
Key Attributes
Model Number:
MPP104J2JB040C4F0ZR
Product Description
Product Overview
The CBB21/MPP series metallized polypropylene film capacitors are designed for electronic equipment applications. These capacitors feature a non-inductive winding structure with a flame-retardant epoxy resin powder coating. They are suitable for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits. Key advantages include excellent self-healing properties, low loss, and low internal temperature rise.
Product Attributes
- Brand: DGCX
- Product Type: Metallized Polypropylene Film Capacitor (Impregnated Type)
- Model Series: CBB21/MPP
- Origin: Dongguan, China
- Encapsulation: Flame-retardant epoxy resin powder coating
- Environmental Compliance: RoHS, REACH, Halogen-free (if required)
Technical Specifications
| Part Number | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz) | Dimensions (mm) - L x W x T | Lead Pitch (mm) |
|---|---|---|---|---|---|---|
| MPP104J2JB040C4F0ZR | 0.1 | 5 | 630 | 0.0010 (1kHz, 20C) | 8.6 x 8.4 x 3.7 | 7.5 |
Detailed Electrical Characteristics
| Parameter | Specification | Test Method |
|---|---|---|
| Climate Category | 40/105/21 | - |
| Operating Temperature Range | -40C to +105C (+85C to +105C: Derating factor 1.25% / C) | - |
| Rated Temperature | 85C | - |
| Capacitance Range | 0.001F to 6.8F | - |
| Capacitance Tolerance | 5%(K), 10%(K) | - |
| Rated Voltage (VDC) | 100, 160, 250, 400, 630, 1000, 1250, 1600, 2000 | - |
| Dissipation Factor (DF) | 0.0010 (1kHz, 20C) | - |
| Insulation Resistance | 30,000M for C0.33uF (100VDC, 60s) 10000M*uF for C>0.33uF (100VDC, 60s) | - |
| Withstand Voltage | 1.6 UR(VDC), 5 seconds | - |
| Terminal Strength (Tensile) | No visible mechanical damage | 10N load, 10 seconds (for 0.6 & 0.8mm wire diameter) |
| Terminal Strength (Bending) | No visible mechanical damage | 5N force, 90 2 times (for 0.6 & 0.8mm wire diameter) |
| Solderability | 95% tinning rate on leads | Soldering temperature: 2455, Immersion time: 2.50.5 seconds |
| Soldering Heat Resistance | Appearance: No visible damage Capacitance change: C/C 3% DF increase: 0.004 (C1.0F, 10kHz) / 0.004 (C>1.0F, 1kHz) | Soldering temperature: 2605, Immersion time: 101 seconds, Recovery time: 1-2 hours |
| Rapid Temperature Change | Appearance: No visible damage | A=-40, B=+105, 5 cycles, 30 min duration each |
| Vibration | Appearance: No visible damage | Amplitude 0.75mm or acceleration 98m/s (whichever is lower), frequency 10-500Hz, 3 directions, 2h each direction, total 6h |
| Shock | Appearance: No visible damage Capacitance change: C/C 5% DF increase: 0.004 Insulation Resistance: IR/IR 50% | 4000 times, acceleration 390m/s, pulse duration: 6ms |
| Climatic Sequence | Appearance: No visible damage Capacitance change: C/C 5% DF increase: 0.005 Insulation Resistance: IR/IR 50% | Dry Heat (+105, 16h), Cyclic Damp Heat (Test Db, first cycle), Cold (-40, 2h), Low Pressure (8.5kPa, 1h), Cyclic Damp Heat (Test Db, remaining cycles) |
| Steady State Damp Heat | Appearance: No visible damage Capacitance change: C/C 5% DF increase: 0.002 (C1.0F, 10kHz) / 0.004 (C>1.0F, 1kHz) Insulation Resistance: IR/IR 50% | 90-95% RH, 402, 21 days, 1-2 hours recovery time |
| Endurance | Appearance: No visible damage Capacitance change: C/C 8% DF increase: 0.004 Insulation Resistance: IR/IR 50% | 85C, 1000 hours, 1.25UR applied voltage |
| Characteristics with Temperature | 0(Cb-Cd)/Cd+3% at -40C -4.0%(Cf-Cd)/Cd0 at 105C | Static method, temperatures: a.(202), b.(-403), d.(20 2), f.(1052), g.(202) |
| Charge/Discharge | Capacitance change: C/C 5% DF increase: 0.005 (10KHz, CR1.0uF) / 0.005 (1KHz, CR>1.0uF) Insulation Resistance: IR/IR 50% | 10,000 cycles, charge voltage UR, charge time 0.5s, discharge time 0.5s |
Usage Rules
- Operating Range: Do not exceed the upper category temperature. Avoid overload and exceeding maximum pulse current.
- Handling: Avoid repeated squeezing at the lead root. Be mindful of lead tip sharpness.
- Soldering:
- Wave Soldering (MPP Polypropylene Film Capacitors): TP 110 for 120 seconds; Ts 120 for 45 seconds. For P7.5mm, T4mm, wave soldering time < 4 seconds.
- Soldering Iron: Tip temperature not exceeding 350, time not exceeding 3 seconds.
- Note: Lead-type film capacitors are not suitable for reflow soldering.
- Ts: Maximum temperature the capacitor body can withstand during wave soldering.
- Tp: Maximum temperature the capacitor body can withstand during the preheating stage.
2505291610_DGCX-MPP104J2JB040C4F0ZR_C49002969.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
