<
>
Specifications
Capacitance:
220nF
Operating Temperature:
-40℃~+110℃
Tolerance:
±10%
Voltage(AC):
310V
Mfr. Part #:
MX2224KQ3C30YB2000R
Package:
Through Hole,P=10mm
Key Attributes
Model Number:
MX2224KQ3C30YB2000R
Product Description
Product Overview
The DGCX X2 series is a range of metalized polypropylene film capacitors designed for suppressing electromagnetic interference (EMI) in power supplies. These capacitors feature a non-inductive winding structure with excellent self-healing properties, capable of withstanding high voltage surges. Encased in a flame-retardant plastic shell (UL94V-0) and sealed with flame-retardant epoxy resin, they are ideal for interference suppression and X-line applications where capacitor failure must not pose a shock hazard. They are compliant with RoHS, REACH, and halogen-free requirements.
Product Attributes
- Brand: DGCX
- Product Series: MPX
- Capacitor Type: X2 Metalized Polypropylene Film Capacitor
- Construction: Non-inductive winding
- Encapsulation: Flame-retardant plastic shell (PBT), Flame-retardant epoxy resin
- Material Compliance: RoHS, REACH, Halogen-free (if required)
- Certifications: UL&CUL (E499953), ENEC-VDE (40048056), CQC (CQC18001191338)
- Color: Yellow (Y)
- Origin: Dongguan Chengxi Electronics Co., Ltd.
Technical Specifications
| Product Code | Capacitance (uF) | Tolerance (%) | Rated Voltage (VAC) | Pitch (mm) | Dimensions (mm) W*H*T | Lead Diameter (mm) | Climate Category/Flammability Rating | Dissipation Factor (DF) @ 1kHz | Insulation Resistance | Dielectric Strength (AC) |
|---|---|---|---|---|---|---|---|---|---|---|
| MX2224KQ3C30YB2000R | 0.22 | 10% | 275/300/310 | 10.0 | 13.0*12.0*6.0 | 0.6 | 40/110/56 B | 0.0010 | 15,000M (for C0.33uF) / 5000M*uF (for C>0.33uF) | 2120Vac (60s) (between case and terminals) |
| General Specifications (MPX Series) | 0.001F4.7F | 10% (K) | 275/300/310 Vac | 5.0, 7.5, 10.0, 12.5, 15.0, 22.5, 27.5, 31.0, 37.5, 41.0, 52.5 | N/A | 0.6, 0.8, 1.0, 1.2 | 40/110/56 B | See detailed table below | See detailed table below | 4.3UR(VDC), 5s (between terminals) |
Detailed Electrical Characteristics
| Item | Characteristic | Test Method | Specification |
|---|---|---|---|
| 1. Terminal Strength | Tensile Strength | Lead Diameter: 0.6&0.8mm: 10N, 10s Lead Diameter: 1.0&1.2mm: 20N, 10s | No visible mechanical damage |
| Bending Strength | Lead Diameter: 0.6&0.8mm: 5N, 90x2 times Lead Diameter: 1.0&1.2mm: 10N, 90x2 times | No visible mechanical damage | |
| 2. Solderability | Solder wetting rate | Solder temp: 2455, Immersion time: 2.50.5s | 95% |
| 3. Soldering Heat Resistance | Appearance | Solder temp: 2605, Immersion time: 101s, Recovery time: 1-2h at -40 for 2h | No visible damage |
| Dissipation Factor increase | - | 0.005 | |
| Capacitance change | - | C/C 5% | |
| 4. Endurance (Humidity, Heat, Vibration, Shock) | Appearance | - | No visible damage |
| Capacitance change | - | C/C 5% | |
| Dissipation Factor increase | C1.0F (10kHz): 0.008 C>1.0F (1kHz): 0.005 | - | |
| 5. Climate Sequence (Test Db) | Appearance | - | No visible damage |
| Capacitance change | - | C/C 5% | |
| Dissipation Factor increase | C1.0F (10kHz): 0.008 C>1.0F (1kHz): 0.005 | - | |
| 6. Damp Heat (Steady State) | Appearance | Relative Humidity: 9095%RH, Temp: 402, Duration: 56 days | No visible damage |
| Capacitance change | - | C/C 5% | |
| Dissipation Factor increase | C1.0F (10kHz): 0.008 C>1.0F (1kHz): 0.005 | - | |
| 7. Pulse Voltage | Self-healing breakdown | Applied pulse voltage: 1.0KV (CR1F), 2.0KV (CR>1F) | Capacitor is considered qualified if less than three continuous pulse waveforms indicate no self-healing breakdown after 24 pulses. |
| 8. Endurance | Appearance | Temp: +110, Test Voltage: 1.25UR, Duration: 1000 hours | No visible damage |
| Capacitance change | - | C/C 10% | |
| Dissipation Factor increase | C1.0F (10kHz): 0.008 C>1.0F (1kHz): 0.005 | - | |
| 9. Charge/Discharge | Appearance | Charge/Discharge cycles: 10,000; Charging time: 0.5s; Discharging time: 0.5s | No visible damage |
| Capacitance change | - | C/C 10% | |
| Dissipation Factor increase | 10KHz, CR1.0uF: 0.008 1KHz, CR>1.0uF: 0.005 | - | |
| 10. Flammability Test | Burning time after flame removal | Needle flame test, Burning time application based on volume (mm) | 10 seconds. Burning drips should not ignite tissue paper. Flammability rating: B. |
| 11. Spontaneous Combustion Test | Burning of gauze | Capacitor subjected to discharge from a stored energy capacitor 20 times. | Gauze should not burn. Electrical measurement not required. |
Usage Guidelines
- Operating Range: Do not exceed the upper limit category temperature. Avoid overload and exceeding maximum pulse current.
- Handling: Avoid repeated squeezing at the lead root. Be mindful of lead tip sharpness.
- Soldering:
- Wave Soldering: TP 110; Ts 120, 45s. For P7.5mm, T4mm, soldering time < 4 seconds.
- Soldering Iron: Tip temperature not exceeding 350, soldering time not exceeding 3 seconds.
- Reflow Soldering: Not suitable for film capacitors with printed lines.
Storage Conditions
- Store in original packaging.
- Temperature: Max 35
- Relative Humidity: Max 80%
- Storage Time: Maximum 12 months from the production date marked on the packaging bag.
- Note: Prolonged exposure to air may degrade lead solderability. Avoid high temperature and humidity environments.
2411151510_DGCX-MX2224KQ3C30YB2000R_C42381334.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
