Product Overview

The CBB series film capacitors are manufactured using metallized polypropylene film in a non-inductive construction, with tinned copper wire leads and a flame-retardant epoxy resin coating. They offer excellent self-healing properties and flame retardancy, complying with UL 94-V0 standards. These capacitors are ideal for blocking, coupling, decoupling, filtering, bypassing, timing, and temperature control applications in various electronic equipment.

Product Attributes

• Brand: Dersonic
• Origin: Dongguan, China
• Material: Metallized polypropylene film, tinned copper wire leads, epoxy resin coating
• Certifications: UL 94-V0, ROHS, REACH

Technical Specifications

Note on dv/dt: If the working voltage (U) is lower than the rated voltage (Ur), the capacitor can operate at a higher dv/dt. The maximum allowed dv/dt is calculated by multiplying the table value by (Ur/U).

Note on Rated Voltage: The voltage a capacitor can continuously withstand within its operating temperature range. Derating of 1.35% per is required for temperatures between 85 and 105 (AC from 75).

Note on Working Temperature: Ensure the total operating temperature (ambient + self-heating + radiation) does not exceed the rated range. High temperatures in AC or high-frequency pulse circuits due to current can cause capacitor failure.

Marking

Example: 104J400V

• Logo: Dersonic
• Capacitance: e.g., 104 (0.1uF), 224 (0.22uF)
• Capacitance Tolerance: e.g., 5%(J)
• Rated Voltage: e.g., 100/160/250/400/450/630/1000V

Features

• Non-induction construction
• High moisture-resistance
• Self-healing property
• Flame retardant type (compliance with UL 94-V0)
• Very small loss
• Excellent capacitance and DF for frequency and temperature characteristics
• High insulation resistance

Typical Application

Suitable for blocking, coupling, decoupling, filtering, by pass, timing, temperature control. Ideal for telecommunication equipment, data processing equipment, industrial instruments, automatic control systems, and other general electronic equipment.

Construction and Main Materials

• Main Material: Metallized polypropylene Film (MPPZAH or MPPA, 4-12um)
• Terminal: Tinned copper clad steel wire (0.6, 0.8/1.0mm) or Tinned copper wire (CP or CU)
• Inside Coating Material: Epoxy resin (UL94-V0)
• Outside Coating Material: Epoxy powder (UL94-V0)
• Note: All materials comply with ROHS and REACH requirements.

Reference Standards

• GB-T2693-2001 (IDT IEC 60384-1-2008)
• GB-T10190-1988
• IEC-60384-16-2005
• GB-T 2828.1-2003