<
>
Specifications
Capacitance:
220nF
Operating Temperature:
-40℃~+105℃
Tolerance:
±5%
Voltage Rating:
630V
Mfr. Part #:
CFC2J224JG1IS50O8100
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
CFC2J224JG1IS50O8100
Product Description
Product Overview
The DONGGUAN DERSONIC ELECTRONIC CO., LTD. CBB21 type metallized polypropylene film capacitor is designed for electronic equipment. It features a metallized polypropylene film dielectric, low high-frequency loss, small internal temperature rise, and flame retardant epoxy resin powder coating (UL94/V-0). This capacitor is widely used in high-frequency, DC, AC, and pulse circuits, including S-correction circuits for large screen monitors and applications requiring high frequency and high current pulses.
Product Attributes
- Brand: Dersonic
- Origin: Dongguan City, PRC
- Material: Metallized polypropylene film dielectric, Flame retardant epoxy resin powder coating
- Certifications: RoHS 2.0, Halogen-free, REACH, UL94/V-0
Technical Specifications
| Description | Specification |
| Part No. | CFC2J224JG1IS50O8100 |
| Reference Standard | GB/T 10190 (IEC 60384-16) |
| Climatic Category | 40/105/21 |
| Rated Temperature | 85 |
| Operating Temperature Range | -40~105 (+85 to +105: decreasing factor 1.25% per degree for rated voltage) |
| Rated Voltage (UR) | 630V |
| Withstand Voltage | 1008VDC |
| Capacitance | 0.22UF 5% @ 1kHz, 1.0V, 20.0 |
| Tangent of loss angle | 0.001 max @ 1kHz, 1.0V, 20.0; 0.002 max @ 10kHz, 1.0V, 20.0; 0.006 max @ 100kHz, 1.0V, 20.0 |
| Insulation Resistance | 100000M min @ 100V, 1min |
| Maximum Pulse Rise Time (dV/dt) | 900V/us |
| Dimensions (L x W x T) | 24.0 x 11.5 x 6.5 mm |
| Lead Spacing | 17.5 mm |
| Lead Diameter (d) | 0.8 mm |
| Marking | CBB21/630V/0.22UF/J/F15//L24/17.5*11.5*6.5/ZNR C719325 |
Measurement and Testing
| Test Item | Requirement | Test Method |
| Capacitance (CR) | Within the tolerance specified | 1kHz (120Hz for C>10uF), 1.0V @ 20 |
| Tangent of loss angle (tan) | 0.001 max | 1kHz (120Hz for C>10uF), 1.0V @ 20 |
| Insulation resistance (IR) | 100000M min | 10kHz, 1.0V @ 20 |
| Voltage proof (TV) | No permanent breakdown or flashover | Between terminals: 1.6 times rated voltage, 5sec. |
| Robustness of terminations | No wire breakage and no damage of capacitor | Tensile load (0.8mm: 10N, >0.8mm: 20N), Bending load (0.8mm: 5N, >0.8mm: 10N) |
| Solderability | Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. | Solder temperature: 260 5, Solder time: 5 0.5sec |
| Resistance to soldering heat | No marked defect | Solder temperature: 245 5, Solder time: 3 0.5sec |
| Vibration | C/C 3% max of the Initial value, tan 0.004 max of increased value, IR 50% min of the applicable limits | IEC 60068-2-6, test Fc (0.75mm displacement, 10Hz to 50Hz; Total duration 6h) |
| Bump | C/C 3% max of the Initial value, tan 0.004 max of increased value, IR 50% min of the applicable limits | IEC 60068-2-29, test Eb (Duration: 6ms, Times: 1000) |
| Rapid change of temperature | C/C 3% max of the Initial value, tan 0.004 max of increased value, IR 50% min of the applicable limits | IEC 60068-2-14, test Na (Cycles: 5, Duration at limits: 30 min) |
| Passive flammability test | Maximum burning time not exceeded, burning droplets/glowing parts shall not ignite tissue paper. | IEC 60384-1, 4.38 (Category B, Flame exposure time: 10s) |
2509180925_Dersonic-CFC2J224JG1IS50O8100_C719325.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
