<
>
Specifications
Capacitance:
33nF
Operating Temperature:
-40℃~+105℃
Tolerance:
±5%
Voltage Rating:
630V
Mfr. Part #:
CFC2J333JE1612085100
Package:
Through Hole,P=10mm
Key Attributes
Model Number:
CFC2J333JE1612085100
Product Description
Film Capacitors - CBB21 Series
This document outlines the specifications for the CBB21 type metallized polypropylene film capacitors (dipped). These capacitors are designed for use in electronic equipment, offering features such as metallized polypropylene film dielectric, low high-frequency loss, small internal temperature rise, and flame-retardant epoxy resin powder coating (UL94/V-0). They are widely applicable in high-frequency, DC, AC, and pulse circuits, including S-correction circuits for large-screen monitors and applications requiring high frequency and high current pulses.
Product Attributes
- Brand: Dersonic
- Origin: Dongguan City, PRC
- Material: Metallized polypropylene film
- Coating: Flame retardant epoxy resin powder (UL94/V-0)
- Certifications: RoHS 2.0, Halogen-free, REACH
- Reference Standard: GB/T 10190 (IEC 60384-16)
Technical Specifications
| Part Number | Description | Rated Voltage (UR) | Capacitance | Tolerance | Operating Temperature Range | Tangent of Loss Angle (max) | Insulation Resistance (min) | Maximum Pulse Rise Time (dV/dt) | Dimensions (L*W*T) | Climatic Category | Rated Temperature |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CFC2J333JE1612085100 | CBB21 type Metallized polypropylene film capacitor(dipped) | 630VDC | 33NF | 5% @ 1kHz | -40~105 | 0.001 max @ 1kHz 0.002 max @ 10kHz 0.006 max @ 100kHz | 100000M min @ 100V | 1200V/us | 12.0*8.5*5 mm | 40/105/21 | 85 |
Measurement and Testing
| Test Item | Requirements | Test Method |
|---|---|---|
| Capacitance (CR) | Within the tolerance specified | Measured with 100V DC (10V for UR<100V) for less than 1 min. |
| Insulation Resistance (IR) | 100000M min | Measured with 100V DC (10V for UR<100V) for less than 1 min. |
| Tangent of loss angle (tan) | 0.001 max @ 1kHz 0.002 max @ 10kHz 0.006 max @ 100kHz | 1.0V @ 20 |
| Voltage Proof (TV) | No permanent breakdown or flashover | 1.6 times rated voltage, 5s. Cut off Current 10mA, ARC=OFF, Voltage raising time: 5~10sec, Pulse rise: 150V/us |
| Robustness of terminations | No wire breakage and no damage of capacitor | Tensile: 10N (0.8mm lead), 20N (>0.8mm lead) Bending: 5N (0.8mm lead), 10N (>0.8mm lead) |
| Resistance to soldering heat | C/C: 3% max of the Initial value tan: 0.004 max of increased value IR: 50% min of the applicable limits | IEC 60068-2-20, Test Tb, method 1 (solder bath) Solder temperature: 260 5, Solder time: 5 0.5sec |
| Solderability | Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. | IEC 60068-2-20, Test Ta, method 1 (solder bath) Solder temperature: 245 5, Solder time: 3 0.5sec |
| Rapid change of temperature | C/C: 3% max of the Initial value tan: 0.004 max of increased value IR: 50% min of the applicable limits | IEC 60068-2-14, test Na, 5 cycles |
| Dry heat | C/C: 5% max of the Initial value tan: 0.005 max of increased value IR: 50% min of the applicable limits | IEC 60068-2-2, test Bb, 1000h+24/-0h at 125 2 |
| Vibration | C/C: 3% max of the Initial value tan: 0.004 max of increased value IR: 50% min of the applicable limits | IEC 60068-2-6, test Fc (0.75mm displacement, 10Hz to 50Hz; Total duration 6h) |
| Bump | No marked defect | IEC 60068-2-29, test Eb (6ms, 1000 times) |
| Climatic sequence | C/C: 5% max of the Initial value tan: 0.004 max of increased value IR: 50% min of the applicable limits TV: No permanent breakdown for rated voltage | IEC 60384-1, 4.21 (Dry heat, Damp heat cyclic, Cold, Low air pressure) |
2410121519_Dersonic-CFC2J333JE1612085100_C19712465.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
