<
>
Specifications
Current - Saturation (Isat):
12A
Mfr. Part #:
DH0530H-1R0M
Package:
SMD,5.6x5.2mm
Key Attributes
Model Number:
DH0530H-1R0M
Product Description
Product Overview
The DH0530H-1R0M is an SMD Molding Power Inductor from Guangdong Dehong Sensing Microelectronics Co., Ltd. It is designed for consumer electronics applications and features an integrated molding construction. The product ensures it meets the specifications outlined in this approval document. Users are advised to verify product suitability for their specific design requirements. Modifications to this document require mutual agreement. The product is suitable for use within a temperature range of -45 to +125.
Product Attributes
- Brand: (Guangdong Dehong Sensing Microelectronics Co., Ltd.)
- Origin: China
- Product Name: (SMD MOLDING POWER INDUCTOR)
- Product Model: DH0530H-1R0M
- Grade: (General)
- Revision: A/0
- Date: 2021/5/10
Technical Specifications
| Part NO. | L0 (H) ±20% | DCR (m) Typ. | DCR (m) Max. | I rms (A) Typ. | I sat (A) Typ. | External Dimensions (A x B x C) (mm) | External Dimensions (D x E x G) (mm) | External Dimensions (H x I) (mm) | Reel Packaging (pcs/reel) | Inner Box Packaging (pcs/box) | Outer Box Packaging (pcs/box) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DH0530H-1R0M | 1.0 | 10 | 15 | 6 | 12 | 5.2 ± 0.3 x 5.6 ± 0.5 x 3.0 Max. | 1.3 ± 0.3 x 2.0 ± 0.3 x 1.9 Ref. | 6.2 Ref. x 2.5 Ref. | 2000 | 6000 | 18000 |
Material List
| NO | ITEM | MATERIAL | SUPPLIER OF THE MATERIAL |
|---|---|---|---|
| 1 | CORE | (ALLOY POWDER) | DH |
| 2 | COPPER | (POLYIMIDE ENAMELED COPPER WIRE) | TOTOKU |
| 3 | BLAK | (SILVER-WHITE MATERIAL) | ZS |
| 4 | INK | (BLACK INK) | YMS |
Test Conditions & Methods
| TEST ITEMS | SPECIFICATIONS | TEST CONDITIONS / TEST METHODS |
|---|---|---|
| ELECTRICAL PERFORMANCE TEST | Inductance (L): Refer to Standard Electrical Characteristic List. | MICROTEST6377 |
| DC Resistance (DCR) | TH2511 | |
| Rated Current (IDC): Inductance change should be less than 30% or temperature rise should not be 40. | Applied the current to coils. | |
| Temperature Rise Test: Not exceed 40. Applied the allowed DC current for 4 hours. | Applied the allowed DC current for 4 hours. | |
| OVER LOAD TEST | No evidence of electrical damage. | Applied 1.5 times of rated allowed DC current for 5 minutes. |
| Inductance change should be less than 30% to initial value and temperature rise should not be 40. | Applied the current to coils. | |
| MECHANICAL PERFORMANCE TEST | SOLDER HEAT RESISTANCE: Inductors should have no evidence of electrical and mechanical damage. Inductance should not change more than ±10%. | Preheat: 150 100s. Solder Temperature: 255±5. Dip Time: 10s Max. |
| VIBRATION TEST: Amplitude: 1.5 mm. Frequency: 10-55-10Hz / 1 MIN. Direction: X, Y, Z. Time: 2 HRS/X, Y, Z. | - | |
| SHOCK TEST | Inductors should be dropped 10 times from a height of 1m onto 3cm wooden board. | - |
| SOLDERABILITY TEST | More than 90% of terminal electrode should be covered with solder. | Preheat: 150 120s. Solder Temperature: 255±5. Time: 10s Max. |
| ENVIRONMENTAL TEST (CLIMATIC TEST) | TEMPERATURE CHARACTERISTIC: Appearance: No damage. Inductance: Within ±10% of initial value. | -45 ~ +125 |
| HUMIDITY TEST: 60±2 / 96±2 hours. R.H: 90-95%RH. Test at room temperature for 1 hour after test. | - | |
| LOW TEMPERATURE STORAGE: -45±2 / 24 hours. Test at room temperature for 1 hour after test. | - | |
| THERMAL SHOCK TEST: -45±2 30 minutes, +85±2 30 minutes, 100 cycles. Test at room temperature for 1 hour after test. | - | |
| HIGH TEMPERATURE STORAGE | 85±2 / 24 hours. Test at room temperature for 1 hour after test. | - |
Points For Attention
- Product installation best shelf life: within 180 days from the date of manufacture.
- For remaining unused products after removal, be sure to seal with sealing tape to prevent oxidation of the pads from affecting soldering.
- Any water stains, sweat stains, or dust in contact with the pads will affect solderability. Do not directly touch the product pads with bare hands to avoid affecting soldering.
- This product will change due to changes in working conditions. When you need to use this product in other applications, please re-test.
- Over-limit voltage, current, or temperature can cause irreversible damage to the product, potentially leading to functional decay or failure.
- This product is not suitable for humid, dark, and strongly corrosive environments.
2411121621_dehongganying-DH0530H-1R0M_C41407030.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
