<
>
Specifications
Current - Saturation (Isat):
5A
Mfr. Part #:
DH0530H-6R8M
Package:
SMD,5.6x5.2mm
Key Attributes
Model Number:
DH0530H-6R8M
Product Description
Product Overview
This document outlines the specifications for the DH0530H-6R8M SMD Molding Power Inductor from Guangdong Dehong Sensing Microelectronics Co., Ltd. This product is designed for consumer electronics applications and features an integrated molding structure.
Product Attributes
- Brand: (Guangdong Dehong Sensing Microelectronics Co., Ltd.)
- Origin: 38
- Product Type: (SMD Molding Power Inductor)
- Grade: (General)
- Application: (Consumer Electronics)
Technical Specifications
| Part NO. | L0 (H) 20% | DCR (m) Typ. | Rated Current I rms (A) Typ. | Saturation Current I sat (A) Typ. | Dimensions (mm) A x B x C | Operating Temperature Range |
| DH0530H-6R8M | 6.8 | 70 | 3 | 5 | 5.2 x 5.6 x 3.0 Max. | -45~+125 |
| Test Item | Specification | Test Condition/Method |
| Inductance (L) | Refer to Standard Electrical Characteristic List. | MICROTEST6377 |
| DC Resistance (DCR) | Refer to Standard Electrical Characteristic List. | TH2511 |
| Rated Current (IDC) | Inductance change 30% or Temperature rise 40 | Applied current after inductance drop not exceeding 30%, or temperature rise not exceeding 40 |
| Temperature Rise Test | 40 | Applied rated current for 4 hours. |
| Overload Test | No obvious electrical damage | Applied 1.5 times rated current for 5 minutes. |
| Solder Heat Resistance | No appearance or electrical damage; Inductance change 10% | Preheat: 150 100s; Solder Temp: 2555; Dip Time: 10s Max. |
| Vibration Test | N/A | Amplitude: 1.5 mm; Frequency: 10-55-10Hz / 1 MIN; Direction: X, Y, Z; Time: 2 HRS/X, Y, Z |
| Shock Test | N/A | Dropped 10 times from 1m height onto 3cm wooden board. |
| Solderability Test | > 90% of electrode covered with solder | Preheat: 150 120s; Solder Temp: 2555; Time: 10s Max. |
| Temperature Characteristic | Appearance: No damage; Inductance change 10% of initial value. | -45 ~ +125 |
| Humidity Test | N/A | 602 / 962 hours; R.H: 90-95%RH |
| Low Temperature Storage | N/A | -452 / 24 hours; Test after 1 hour at room temperature. |
| Thermal Shock Test | N/A | -452 30 min, +852 30 min; 100 cycles; Test after 2 hours at room temperature. |
| High Temperature Storage | N/A | 852 / 24 hours; Test after 1 hour at room temperature. |
Packaging Information
| Product Series | Reel Size | Dimensions (mm) P W A0 B0 K0 A B C D G N T | Pieces per Reel | Inner Box Quantity | Outer Box Quantity | Peel Force Requirement |
| DH0530 | 13 Inch | 8.00.1, 16.00.3, 5.40.2, 6.20.2, 3.20.15, 330, 21, 13, 16, 17, 100, 20 | 2000pcs/reel | 6000pcs/box | 18000pcs/box | 20~140g |
Points For Attention
- Best shelf life: within 180 days from ex-factory date.
- Seal remaining unused products with sealing tape after opening to prevent solder pad oxidation.
- Contact with water, sweat, or dust on solder pads can affect solderability; avoid direct contact with bare hands.
- Product characteristics may change with operating conditions; re-test if used in different applications.
- Excessive voltage, current, or temperature can cause irreversible damage, functional decay, or failure.
- Not suitable for humid, dark, or strongly corrosive environments.
2411121621_dehongganying-DH0530H-6R8M_C41407037.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
