<
>
Specifications
Mfr. Part #:
DH0630H-R10M
Package:
SMD,7.1x6.6mm
Key Attributes
Model Number:
DH0630H-R10M
Product Description
Product Overview
This document outlines the specifications for the SMD Molding Power Inductor, model DH0630H-R10M, from Guangdong Dehong Sensing Microelectronics Co., Ltd. It details the product's electrical characteristics, mechanical performance, environmental testing, and packaging. The inductor is designed for consumer electronics applications and emphasizes adherence to the specifications outlined in this document.
Product Attributes
- Brand: (Guangdong Dehong Sensing Microelectronics Co., Ltd.)
- Origin: China
- Product Type: (SMD Molding Power Inductor)
- Grade: E ( - General)
Technical Specifications
| Part NO. | L0 (H) 30% | DCR (m) Typ. | DCR (m) Max. | I rms (A) Typ. | I sat (A) Typ. | External Dimensions (A/B/C/D/E) (mm) | PCB Pattern | Material List (Core/Copper/Base/Ink) | Test Items | Specifications | Test Conditions / Test Methods |
| DH0630H-R10N | 0.10 | 1.6 | 2.5 | 45 | 30% drop from initial value | 6.6 0.3 / 7.1 0.5 / 3.0 Max. / 1.6 0.5 / 3.0 0.3 | Refer to PCB Pattern Diagram | Alloy powder / Polyesterimide enameled wire / Silver-white material / Black ink | Electrical Performance Test | Inductance (L) | Refer to Standard Electrical Characteristic List. (100KHz/1V) |
| DC Resistance (DCR) | Refer to Standard Electrical Characteristic List. | TH2511 | |||||||||
| Rated Current (IDC) | Inductance change should be less than 30% to initial value and temperature rise should not be 40 Typ. | Applied the current to coils the inductance change should be less than 30 to initial value and temperature rise should not be 40 Typ. | |||||||||
| Temperature Rise Test | Not exceed 40 | Applied the allowed DC current for 4 hours. | |||||||||
| Over Load Test | No evidence of electrical damage | Applied 1.5 times of rated allowed DC current for 5 minutes. | |||||||||
| Mechanical Performance Test | Solder Heat Resistance | Inductors should have no evidence of electrical and mechanical damage. Inductance should not change more than 10. Preheating: 150 100s. Solder Temperature: 2555. Dip Time: 10s Max. | |||||||||
| Vibration Test | Amplitude: 1.5 mm. Frequency: 10-55-10Hz / 1 MIN. Direction: X, Y, Z. Time: 2 HRS/X, Y, Z. | ||||||||||
| Shock Test | Inductors should be dropped 10 times from a height of 1m onto 3cm wooden board. | ||||||||||
| Solderability Test | More than 90% of terminal electrode should be covered with solder. | Preheating: 150 120s. Soldering Temperature: 2555. Time: 10s Max. | |||||||||
| Climatic Test | Temperature Characteristic | Appearance: No damage. Inductance: Within 10% of initial value. Range: -45 ~ +125. | |||||||||
| Humidity Test | 602 / 962 hours. R.H: 90-95%RH. | Test at room temperature for 1 hour after storage. | |||||||||
| Low Temperature Storage | -452 / 24 hours. | Test at room temperature for 1 hour after storage. | |||||||||
| Thermal Shock Test | -452 30 min, +852 30 min. 100 cycles. | Test at room temperature for 1 hour after storage. | |||||||||
| High Temperature Storage | 852 / 24 hours. | Test at room temperature for 1 hour after storage. | |||||||||
| Packaging | 13-inch reel. Size (mm): P=12.00.1, W=16.00.3, A0=6.90.2, B0=7.60.2, K0=3.20.15. T=330, N=21, T=13, W=16, T=17, 100 pcs/reel. | DH0630: 1000pcs/reel, 3000pcs/inner box, 9000pcs/outer box. Reel peel force: 20~140g. |
2504101957_dehongganying-DH0630H-R10M_C41407083.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
