<
>
Specifications
Current - Saturation (Isat):
-
Mfr. Part #:
CMLM1608C100MIT
Package:
0603
Key Attributes
Model Number:
CMLM1608C100MIT
Product Description
Product Overview
The CMLM1608C100MIT series Multilayer Power Inductors are designed for various electronic applications requiring efficient power management. These inductors offer reliable performance and are suitable for use in standard and demanding environmental conditions.
Product Attributes
- Product Type: Multilayer Power Inductors
- Series: CMLM1608C100MIT
- Certifications: Pb Free, RoHS Compliant
Technical Specifications
| Part Number | Inductance (uH) | Tolerance (%) | DC Resistance () Max | Rated Current (mA) Max | Self-Resonant Frequency (MHz) Min | Operating Temp Range () | Storage Temp Range () |
|---|---|---|---|---|---|---|---|
| CMLM1608C100MIT | 10 | 20% | 0.90 | 250 | 100 | -55 ~ +125 | -10 ~ +40 |
Dimensions
| Part Number | L (mm) | W (mm) | T (mm) |
|---|---|---|---|
| CMLM1608C100MIT | 1.60.15 | 0.80.15 | 0.80.15 |
Soldering Conditions
| Condition | Details |
|---|---|
| Reflow Soldering | Pre-heating: Temp difference 150 (solder to ferrite surface). Cooling into solvent: Temp difference 100. Time over 230: 90~120 sec. Peak temperature: 255~260 . Slope of temp. rise: 1 to 5 /sec. Heat time: 50 to 150 sec. Peak hold time: 10 max. sec. |
| Reworking (Soldering Iron) | Limited to one time. Do not directly touch products with soldering iron tip. Soldering iron output: 30w max. End of soldering iron: 3mm max. Max temp: 280 for 3 seconds max. |
| Solder Volume | Avoid exceeding upper limits to prevent mechanical or electrical failure. |
| Solderability Test | Solder Temp: 2653, Immersion time: 61 sec, Preheating: 100 to 150 for 1 minute. Solder: Sn-3Ag-0.5Cu. Coverage: 95% min. |
| Solder Heat Resistance Test | Solder Temp: 2405, Immersion time: 31 sec, Solder: Sn-3Ag-0.5Cu. |
Equipment Used for Measurement
| Parameter | Equipment |
|---|---|
| Inductance | HP4286A Inductance analyzer or equivalent |
| DC Resistance | HP 4338 digital miliohm meter with 4 terminal method |
Mechanical Characteristics
| Test Type | Conditions | Performance |
|---|---|---|
| Bending Test | Substrate bend 3mm, hold 10s. | Inductance and DC resistance shall be satisfied 20% of initial value. No deformation. |
| Solder Heat Resistance | Solder Temp: 2653, Immersion time: 61 sec. | Electrical and mechanical characteristics shall be satisfied. No visible damage. |
| Terminal Strength | Consult standard J-STD-002 | Shall be satisfied. |
Reliability and Test Conditions
| Test | Performance Specification | Test Conditions |
|---|---|---|
| High Temperature Resistance | Appearance: no mechanical damage. Inductance: 20% of initial value. | Temperature: 1252. Testing time: 100012hrs. Measurement after 24 hours at room ambient. |
| Biased Humidity Resistance | Appearance: no mechanical damage. Inductance: 20% of initial value. | Humidity: 85 5%RH. Temperature: 85 2. Testing time: 1000 12 hours. Measurement after 24 hours at room ambient. |
| Temperature Cycle | Appearance: no mechanical damage. Inductance: 20% of initial value. | Low Temp: -55 5 (30 min). High Temp: 125 5 (30 min). Cycles: 1000. Measurement after 24 hours at room ambient. |
| Vibration Test | Appearance: no mechanical damage. Inductance: 20% of initial value. | Frequency and Amplitude: 10-2000-10Hz. Direction: X, Y, Z. Test duration: 4 hours per direction (12 hours total). |
| Mechanical Shock Test | Appearance: no mechanical damage. Inductance: 20% of initial value. | Peak acceleration: 100 g's. Duration: 6 ms. Waveform: Half-sine. Velocity change: 12.3 ft/sec. Direction: X, Y, Z. |
| Operational Life | Appearance: no mechanical damage. Inductance: 20% of initial value. | Temperature: 1252. Testing time: 100012hrs. Measurement after 24 hours at room ambient. |
| Electrostatic Discharge Test | Appearance: no mechanical damage. Inductance: 20% of initial value. | ESD voltage: 15k volts. Mode 1: 150 pF/330 Ohm. Mode 2: 150 pF/2000 Ohm. |
Packaging
| Aspect | Details |
|---|---|
| Type | Tape & Reel packaging (Composite Specification 6/8) |
| Inner Packaging | Reel and desiccant in Nylon or plastic bag. |
| Inner Box | Maximum of 5 reels per inner box. |
| Outer Box | Maximum of 6 inner boxes per outer box. |
| Reel Label | Indicates Pb Free and RoHS Compliant. |
| Cover Tape Peeling Strength | Peel angle: 165~180 vs carrier tape. Peel speed: 300mm/min. |
Storage Conditions
| Condition | Recommendation |
|---|---|
| Humidity | 40 or less and 70RH or less. |
| Environmental Factors | Avoid dust or harmful gas (hydrogen chloride, sulfurous acid gas or hydrogen sulfide). Avoid heat or direct sunlight. |
| Package Opening | Minimum packages (e.g., polyvinyl heat-seal) should not be opened until just before use. Use reels as soon as possible after opening. |
| Solderability Shelf Life | 6 months from date of delivery under specified storage conditions. Parts beyond 6 months require solderability check before use. |
2410121819_Cybermax-CMLM1608C100MIT_C778459.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
