<
>
Specifications
Current - Saturation (Isat):
2.5A
Mfr. Part #:
CMLO252010T3R3MTT
Package:
1008
Key Attributes
Model Number:
CMLO252010T3R3MTT
Product Description
Product Overview
The CMLO252010T Series is a range of SMD power inductors designed for various electronic applications. These inductors are constructed with high-quality materials, including an alloy body, enamelled wire winding, and epoxy shielding, ensuring reliable performance and durability. They are lead-free and available in various inductance values and tolerances, suitable for a wide operating temperature range.
Product Attributes
- Brand: Cybermax
- Series: CMLO252010T
- Material: Alloy material (Body), Enamelled Wire (Winding), Epoxy (Shield), Plating-Cu/Ni/Sn (Electric Base)
- Certifications: Lead Free
Technical Specifications
| Part No. | Inductance Ls(uH) | DCR(m) Max | DCR(m) Typ | Saturation Current Isat(A) Max | Rise Current Irms(A) Max | Dimensions L(mm) | Dimensions W(mm) | Dimensions H(mm) | Dimensions F(mm) |
| CMLO252010TR33MTT | 0.3320% | 19.0 | 13.0 | 7.20 | 6.20 | 2.50.2 | 2.00.2 | 1.0Max. | 0.9Typ. |
| CMLO252010TR47MTT | 0.4720% | 22.0 | 15.0 | 6.50 | 5.60 | 2.50.2 | 2.00.2 | 1.0Max. | 0.9Typ. |
| CMLO252010TR68MTT | 0.6820% | 27.0 | 23.0 | 5.50 | 5.00 | 2.50.2 | 2.00.2 | 1.0Max. | 0.9Typ. |
| CMLO252010T1R0MTT | 1.020% | 30.0 | 25.0 | 4.80 | 4.10 | 2.50.2 | 2.00.2 | 1.0Max. | 0.9Typ. |
| CMLO252010T1R5MTT | 1.520% | 55.0 | 45.0 | 3.90 | 3.00 | 2.50.2 | 2.00.2 | 1.0Max. | 0.9Typ. |
| CMLO252010T2R2MTT | 2.220% | 70.0 | 62.0 | 3.00 | 2.10 | 2.50.2 | 2.00.2 | 1.0Max. | 0.9Typ. |
| CMLO252010T3R3MTT | 3.320% | 100.0 | 86.0 | 2.50 | 2.10 | 2.50.2 | 2.00.2 | 1.0Max. | 0.9Typ. |
| CMLO252010T4R7MTT | 4.720% | 180.0 | 160.0 | 2.00 | 1.60 | 2.50.2 | 2.00.2 | 1.0Max. | 0.9Typ. |
Test Conditions & Equipment
| Item | Test Condition | Test Equipment |
| Ls | 1MHz/1V | HP4263BIM3532-50 or equivalent |
| DCR | direct-current | HP4263BRM3545 or equivalent |
| Isat | 1MHz/1V | Microtest 6379 & 6220 or equivalent |
| Irms | ambient temperature 20 | Microtest 6379 & 6220 or equivalent |
Operating Conditions
| Parameter | Value |
| Operating Temperature Range | -40+125, Including self-heating |
| Storage Temperature (Taping) | -10 to +40 |
| Storage Temperature (Body) | -40 to +85 |
| Storage Humidity | 30~70%RH |
Recommended Reflow Profile
| Stage | Temperature () | Time (s) |
| Preheating (T1) | 150 | - |
| Soldering (T2) | 180 | 60 to 120 |
| Peak Temp. (T3) | 230 | 30 to 50 |
| Peak Temp. (T4) | 250 to 260 | 10 max |
Reliability
| No. | Items | Requirements | Test Methods and Remarks |
| 1 | Insulation Resistance | 100M | 100 VDC between inductor coil andThe middle of the top surface of the body for 60 seconds. |
| 2 | Solderability | 90% or more of electrode area shall be coated by new solder. | Dip pads in flux and dip in solder pot (96.5Sn/3.0Ag/0.5Cu) at (2455) for (51) seconds. |
| 3 | Resistance to Soldering Heat | No visible mechanical damage. Inductance change: Within 10% | Dip pads in flux and dip in solder pot (96.5Sn/3.0Ag/0.5Cu) at (2605) for (101) seconds. |
| 4 | Adhesion of terminal electrode | Strong bond between the pad and the core, without come off. | Inductors shall be subjected to (2605) for (205) s Soldering in the base with 0.3mm solder. And then aplomb electrode way plus tax 10 N for (101) seconds. |
| 5 | High temperature | No visible mechanical damage. Inductance change: Within 10% | Temperature (+85 2 ), time (962) h. |
| 6 | Low temperature | No visible mechanical damage. Inductance change: Within 10% | Temperature is (-402) and keep (962) hours. |
| 7 | Thermal shock | No visible mechanical damage. Inductance change: Within 10% | The test sample shall be placed at (-403) and (1252) for (303)min, different temperature conversion time is 2~3 minutes. The temperature cycle shall be repeated 32 cycles. Placed at room temperature for 2 hours, within 48 hours of testing. |
| 8 | Temperature characteristic | Inductance change Pc-b, Pc-d: Within 20% | a: +20 (30~45)min b: -40 (30~45)min c: +20 (30~45)min d: +125 (30~45)min e: +20 (30~45)min |
| 9 | Static Humidity | No visible mechanical damage. Inductance change: Within 10% | Inductors shall be subjected to (933)%RH at (602) for (962) h. Placed at room temperature for 2 hours, within 48 hours of testing. |
| 10 | Life (Durability) | No visible mechanical damage. Inductance change: Within 10% | Inductors shall be stored at (852) for (100024) hours with Irms applied. Placed at room temperature for 2 hours, within 48 hours of testing. |
Taping Reel Dimensions
| Package quantity | Reel Diameter (mm) | Carrier Tape Width (mm) | Carrier Tape Cavity Pitch (mm) |
| 3000 pcs/reel | 1802.0 | 16 min | 4.00.1 |
2410121555_Cybermax-CMLO252010T3R3MTT_C5122472.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
