<
>
Specifications
Voltage Rating:
20V
Tolerance:
±20%
Power(Watts):
50mW
Resistance:
10kΩ
Mfr. Part #:
R09761NS-FB15A7.0-B103-0057
Package:
Through Hole
Key Attributes
Model Number:
R09761NS-FB15A7.0-B103-0057
Product Description
Product Overview
This document outlines the specifications for the R095, R096, R097, R098, R09J, R09P, and R09B series potentiometers. These potentiometers are designed for various applications with specific environmental, mechanical, electrical, and switch performance characteristics detailed below.
Product Attributes
- Brand: DONG GUAN CHANG TAI ER ELECTRONIC CO., LTD.
- Origin: China
- Certifications: RoHS Directive compliant
Technical Specifications
| Section | Specification | Details |
| 1 General Information | Applicable Models | R095, R096, R097, R098, R09J, R09P, R09B Series |
| Usage Environment Temperature | -10+70 or -20+70 | |
| Storage Environment Temperature | -40+85 | |
| Test Condition | Temperature: 5~35, Humidity: 45~85%HR | |
| Soldering Heat-Resistance | Hand soldering: Max 3505 at 3 sec; Auto soldering: Max 2605 at 3 sec. Preheating of board surface: Max 100 within 1 minute. | |
| 2 Construction | Appearance | Parts should be complete, without rust, cracks, or bad plating. |
| Dimensions | Under conditions prescribed by design drawing. | |
| 3 Mechanical Characteristics | Total Rotational Angle | 30010 |
| Rotational Torque | 10~200gf.cm (Rotational velocity: 60/1 Sec.) | |
| Detent Torque | 80~250gf.cm | |
| Detent Quantity | 0, 1, 21, 41 | |
| Rotational Stopper Strength | 3Kgf.cm, 8Kgf.cm, 4Kgf.cm, 5Kgf.cm | |
| Pull-Push Strength of Shaft | 8Kgf, 10Kgf | |
| Nut Tightening Strength | 10Kgf.cm | |
| Shaft Wobble | Radial deviation < 0.7*shaft long L size/20mm at 250gf on shaft tip. | |
| 4 Electrical Characteristics | Total Resistance | 10 K20% or 10 K10% |
| Resistance Taper | A, B, C | |
| End Resistance (Terminal 1-2, 2-3) | 10 for R10K; 20 for 10KR250K; 0.1%R for R250K. | |
| Ratings Power | B Taper: 0.05W; Other taper: 0.025W. | |
| Maximum Operating Voltage | B Taper: 20V DC or 50V AC; Other taper: 12V DC or 25V AC. | |
| Slider Noise | <100mV | |
| Gang Error (Dual-Unit only) | 4dB (-40dB~0dB) or 3dB (-40dB~0dB) | |
| Insulation Resistance | >100M at 250V DC | |
| Voltage Proof | 300V AC for 1 minute | |
| Rotational Life | 10,000 cycles, 15,000 cycles, or 30,000 cycles. (Max resistance change 15% under no load at 600 cycles/hour). | |
| 5 Switch Characteristics | Applicability | Apply or No apply |
| Switch Type | Rotary type or Push-Push type | |
| Switch Circuit | Single Pole Single Throw (S.P.S.T) | |
| Switch Ratings Power | Rotary switch: 12V DC 1A; Push-Push switch: 12V DC 0.5A. | |
| Switch Contact Resistance | 100 m max. initially; 1 max. after 10,000 cycles. | |
| Switch Working Angle or Track | Rotary switch: 5010; Push-Push switch track: 0.5mm or 1.5mm (refer to drawing). | |
| Switch Working Torque | Rotary switch: 800gf.cm max.; Push-Push switch: 700300gf. | |
| Switch Life | 10,000 cycles | |
| 6 Waterproof Characteristics | Waterproof Standard | No apply or Grade -7. (For Grade -7: Potentiometer shaft and bush in 1M deep water, other sealed components exposed to atmosphere for 30 min, no water ingress.) |
2410121231_CTR-R09761NS-FB15A7-0-B103-0057_C18213429.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
