Potentiometer Specifications
This document outlines the specifications for the R09479GO-FF30C7.0-A203/B502-00Y potentiometer, designed for various applications requiring precise resistance control within a specified operating environment. It adheres to RoHS directives and offers robust mechanical and electrical characteristics.
Product Attributes
- Applicable Models: R09479GO-FF30C7.0-A203/B502-00Y
- Country of Origin: China
- Environmental Compliance: RoHS Directive
Technical Specifications
| Category | Parameter | Specification | Details |
|---|---|---|---|
| General Information | Usage Environment Temperature | -30+70 | |
| Storage Environment Temperature | -40+70 | ||
| Test Condition | Temperature: 5~35, Humidity: 45~85%HR | ||
| Soldering Heat-Resistance | Manual Soldering | Max. 3505 at 3 sec | |
| Auto Soldering | Max. 2605 at 3 sec. Board surface preheating: Max. 100 within 1 minute. (Guaranteed for 1-2 times) | ||
| Mechanical Characteristics | Total Rotational Angle | 3005 | |
| Rotational Torque | 20~250gf.cm at 20, Max. 1Kgf.cm at -30 | ||
| Detent Torque | 20~300gf.cm at 20, Max. 1.2Kgf.cm at -40 | ||
| Rotational Stopper Strength | Min. 5Kgf.cm | ||
| Shaft Wobble | Radial deviation < 1*shaft length L / 20mm (at 250gf on shaft tip) | ||
| Electrical Characteristics | Total Resistance | R1: 20 K20%, R2: 5 K20% | |
| Resistance Taper | R1: B curve (40-60% output at 150), R2: A curve (10-25% output at 150) | Terminal 1-2 output vs Terminal 1-3 | |
| End Resistance (Terminals 1-2, 2-3) | 10K: 10, 10KR250K: 20 | ||
| Rated Power | 0.05W | ||
| Maximum Operating Voltage | 10V DC or 50V AC | ||
| Insulation Resistance | Min. 100M at 250V DC | ||
| Reliability | Slider Noise | Max. 100mV | |
| Voltage Proof | 1 Minute at 300V AC | ||
| Rotational Life | 15,000200 cycles (600 r./h, no load) | Resistance change 15% max. |
2410121246_CTR-R09479G0-FF30C7-0-A203-B502-00Y_C18213446.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible