<
>
Specifications
Voltage Rating:
5V
Tolerance:
±20%
Power(Watts):
25mW
Resistance:
10kΩ
Mfr. Part #:
R08719NS-FE15C7.0-A103-0053
Package:
Through Hole
Key Attributes
Model Number:
R08719NS-FE15C7.0-A103-0053
Product Description
APPROVAL SHEET
This approval sheet confirms the product details and specifications for the R087 series potentiometers from DONG GUAN CHANG TAI ER ELECTRONIC., LTD. Customer P/N: [Customer P/N], Customer Product: [Customer Product], Customer Name: [Customer Name]. The product is confirmed as PASSED.
Product Attributes
- Supplier: DONG GUAN CHANG TAI ER ELECTRONIC., LTD.
- Origin: CHINA
- Certifications: ISO9001:2015, ISO14001:2015, IATF 16949:2016
- RoHS Compliance: Compliant
- Part Category: Potentiometer
- Part Number: R08719NS-FE15C7.0-A103-0053
- Applicable Models: R087 series (Length life cycle)
Technical Specifications
| Category | Specification | Details |
|---|---|---|
| General Information | Usage Environment Temperature | -2070 |
| Storage Environment Temperature | -4070 | |
| Test Condition | Temperature: 5~35, Moisture: 45~85%HR | |
| Soldering Conditions (Manual) | Max. 3505 at 3 sec | |
| Soldering Conditions (Auto) | 265 max. at 3 Sec. Preheating: 100 max. within 2 minutes. | |
| Country of Origin | China | |
| Mechanical Characteristics | Total Rotational Angle | 30010 |
| Rotational Torque | 10~150gf.cm (Rotational velocity: 60/1 Sec.) | |
| Rotational Stopper Strength | 3.5Kgf.cm Min. | |
| Shaft Pull-Push Strength | 8Kgf.cm Min. | |
| Nut Tightening Strength | 10Kgf.cm Min. | |
| Shaft Wobble | On the tip of the single shaft exert 250gf, Shaft radial deviant be smaller than: 0.5*shaft long L size/30mm | |
| Electrical Characteristics | Total Resistance | 10 K20% |
| End Resistance (Terminal: 1-2, 2-3) | R10K: 10; 10KR250K: 20; R250K: 0.1%R | |
| Resistance Taper | B, A, C | |
| Rated Power (B Taper) | 0.05W | |
| Rated Power (Other Taper) | 0.025W | |
| Maximum Operating Voltage (B Taper) | 10V DC or 50V AC | |
| Maximum Operating Voltage (Other Taper) | 5V DC or 25V AC | |
| Slider Noise | 100mV Max. | |
| Insulation Resistance | 100M Min. at 250V DC | |
| Voltage Proof | 1 Minute at 300V AC | |
| Rotational Life | 30,000 cycles (under no load, 600 r./h). Permissible resistance change 15% maximum after life cycle. | |
| Gang Error (Dual-Unit only) | 4dB or 3dB (-40dB~0dB) | |
| Switch Characteristics | Applicable | Yes |
| Switch Type | Rotary type | |
| Switch Circuit | S.P.S.T | |
| Switch Rated Power | 12V DC 1A | |
| Switch Contact Resistance | 100 m (500 m after afterlife cycle) | |
| Switch Working Angle | 5010 | |
| Switch Working Torque | 120~250gf.cm | |
| Switch Life | 30,000 Cycles | |
| Waterproof Standard | Standard | Grade -7 of Waterproof standard |
| Test Condition | Potentiometers Shaft and Bush in water 1M deep, other component sealed exposed to standard atmosphere, after 30 minutes no water into potentiometers inner. |
2412161740_CTR-R08719NS-FE15C7-0-A103-0053_C42414330.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
