<
>
Specifications
Voltage Rating:
10V
Tolerance:
±20%
Power(Watts):
50mW
Resistance:
10kΩ
Mfr. Part #:
R08719NS-BK17.4S5.5-B103-0103
Package:
Through Hole
Key Attributes
Model Number:
R08719NS-BK17.4S5.5-B103-0103
Product Description
Product Overview
This specification applies to the 8mm size metal shaft type encoder used in vehicle, audio-visual, radio, and communication equipment. It features a rotary switch with S.P.S.T configuration.
Product Attributes
- Brand: CHANG TAI ER ELECTRONICS CO.,LTD
- Model: R08719NS-BK17.4S5.5-B103-0103
- Certifications: ROHS Directive compliant
- Origin: DONG GUAN
Technical Specifications
| Item | Specification | Details |
| General Information | Applicable Models | R08719NS-BK17.4S5.5-B103-0103 |
| Applying Range | 8mm size metal shaft type encoder for vehicle, audio-visual, radio, and communication equipment. | |
| Operating Temperature Range | -30+70 | |
| Storage Temperature Range | -40+85 | |
| Standard Test Condition | Temperature 535, Moisture 2585%RH, Air Pressure 86106kPa | |
| Appearance and Dimensions | Appearance | No harmful rust, cracks, scratches, and poor plating. |
| Dimensions | Refer to attached drawing | |
| Electrical Characteristics | Total Resistance | 10K20% |
| Resistance Taper | B curve (4060% at 170) | |
| Ratings Power (50) | 0.05W | |
| End Resistance | Terminals 1-2: 20 max; Terminals 2-3: 20 max | |
| Slider Noise | 100mV max (JIS-C-6443 method) | |
| Insulation Resistance | 100M min. at DC 250V | |
| Voltage Proof | 1 minute min at 300V AC | |
| Maximum Operating Voltage | DC 10V, AC 50V | |
| Mechanical Characteristics | Shaft Material | Stainless steel (SUS303 4.75 round strip) |
| Total Rotational Angle | 3005 | |
| Rotational Torque | 1.9 to 24.5 mN.m (20 to 250 gf.cm) at 20; 49 mN.m max (500 gf.cm max) at -30 | |
| Shaft Stopper Strength | 0.5 N.m min (5 Kgf.cm min) | |
| Shaft Wobble and Bend (Radial) | 0.5 (shaft length/30) mm max. (Tip applied 2.5N) | |
| Shaft Wobble and Bend (Axial) | 0.5 mm max. (Tip applied 2.5N) | |
| Shaft Pull Strength | 98.1N min (10Kgf min) | |
| Shaft Push Strength | 98.1N min (10Kgf min) | |
| Nut Tightening Strength | 0.981 N.m min (10Kgf.cm min) | |
| Durability Characteristics | Solderability | 95% min coverage after immersion; Solder Temp: 2355; Time: 30.5 sec |
| Soldering Heat-Resistance | Manual: Max 3505 for 3 sec; Auto: Max 260 5 for 3 sec | |
| Rotational Life | 15,000200 cycles (600 r.p.h. without load); Resistance change 15% max. | |
| Cold Resistance | -30 for 1 hour (unloaded); Check for damage and compliance with specs after 1 hour at standard conditions. | |
| Heat Resistance | 70 for 240 hours (unloaded) | |
| Moisture Resistance | 50, 90-95%RH for 96 hours (unloaded) | |
| Temperature Cycle | 10 cycles (-30 for 30 min to 80 for 30 min per cycle) | |
| Switch Characteristics | Switch Type | Rotary |
| Switch Configuration | Single Pole Single Throw (S.P.S.T) | |
| Switch Ratings Power | DC 16V-3A | |
| Switch Working Angle | 50 max | |
| Switch Working Torque | 78.5 mN.m (800 gf.cm max) | |
| Switch Life | 10,000 cycles without load | |
| Switch Contact Resistance | 50 m max (initial); 200 m Max (after 10000 cycles) | |
| Marking | Lot number |
2410121315_CTR-R08719NS-BK17-4S5-5-B103-0103_C18213457.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
