<
>
Specifications
Voltage Rating:
10V
Tolerance:
±20%
Power(Watts):
25mW
Resistance:
10kΩ
Mfr. Part #:
R09710GS-FB15A7.0-A103-000
Package:
Through Hole
Key Attributes
Model Number:
R09710GS-FB15A7.0-A103-000
Product Description
Potentiometer Specifications
This document outlines the specifications for the R095, R096, R097, R098, R09J, R09P, and R09B series potentiometers. These potentiometers are designed for various applications and are compliant with RoHS directives. They offer a range of mechanical and electrical characteristics suitable for demanding environments.
Product Attributes
- Applicable Models: R095, R096, R097, R098, R09J, R09P, R09B Series
- Origin: China
- Environmental Compliance: RoHS Directive
- Usage Environment Temperature: -1070
- Storage Environment Temperature: -4085
- Test Condition (Temperature/Humidity): 5~35, 45~85%HR
Technical Specifications
| Specification | Details | Notes |
|---|---|---|
| Construction | Appearance: Complete, no rust, cracks, or plating defects. Dimensions: As per design drawing. | |
| Mechanical Characteristics | Total Rotational Angle: 30010 Rotational Torque: 10~200gf.cm (Rotational velocity: 60/1 Sec.) Detent Torque: 80~250gf.cm Detent Quantity: 0 Rotational Stopper Strength: 3Kgf.cm Pull-Push Strength of Shaft: 8Kgf Nut Tightening Strength: 10Kgf.cm Shaft Wobble: On the tip of the single shaft exert 250gf, Shaft radial deviant be smaller than: 0.7*shaft long L size/20mm | |
| Electrical Characteristics | Total Resistance: 10 K20% Resistance Taper: A (Linear), Other Tapers End Resistance (Terminal 1-2, 2-3): R10K: 10; 10KR250K: 20; R250K: 0.1%R Rated Power: B Taper: 0.05W, Other Taper: 0.025W Maximum Operating Voltage: B Taper: 20V DC or 50V AC, Other Taper: 12V DC or 25V AC Slider Noise: 100mV Gang Error: 4dB (-40dB~0dB) (Apply to Dual-Unit only) Insulation Resistance: 100M at 250V DC Voltage Proof: 300V AC for 1 minute Rotational Life: 10,000 cycles (without load, 600 r./h rotation, permissible resistance change 15% max.) | |
| Switch Characteristics | Switch Type: Rotary Type, Single Pole Single Throw (S.P.S.T.) Switch Ratings Power: Rotary Switch: 12V DC 1A; Push-Push Switch: 12V DC 0.5A Switch Contact Resistance: Initial: 100 mmax.; After 10,000 cycles: 1 max. Switch Working Angle or Track: Rotary Switch: 5010; Push-Push Switch Track: 0.5mm or 1.5mm (refer to drawing) Switch Working Torque: Rotary Switch: 800gf.cm max.; Push-Push Switch: 700300gf Switch Life: 10,000 cycles | |
| Soldering Heat Resistance | Manual Soldering: Max 3505 at 3 sec. Auto Soldering: Max 2605 at 3 Sec. Preheating temperature of board surface: 100 max. within 1 minutes. Guarantee: Process at 1 or 2 times. | |
| Waterproof Characteristics | Waterproof Standard: Not Applicable |
2410121246_CTR-R09710GS-FB15A7-0-A103-000_C18213427.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
