<
>
Specifications
Voltage Rating:
10V
Tolerance:
±20%
Power(Watts):
50mW
Resistance:
5kΩ
Mfr. Part #:
R09711N0-FR20A13-B502-00Y
Package:
Through Hole
Key Attributes
Model Number:
R09711N0-FR20A13-B502-00Y
Product Description
Product Overview
This document outlines the specifications for the R09711NO series potentiometers, designed for various applications requiring precise resistance control. The product is compliant with ROHS directives.
Product Attributes
- Brand: CHANG TAI ER ELECTRONICS
- Origin: China
- Certifications: ROHS Directive compliant
Technical Specifications
| Items | Specification |
| Applicable Models | R09711NO |
| Mechanical Characteristics | |
| Total rotational angle | 3005 |
| Rotational torque | 2 to 24.5 mN.m (20 to 250 gf.cm) at 20; 98.1 mN.m max (1kgf.cm max) at -30 |
| Rotational stopper strength | 5Kgf.cm min |
| Shaft Push-pull strength | 10Kgf min |
| Nut tightening | 10Kgf.cm min |
| Shaft wobble | 0.5(shaft/30mm) max. Thrush: 0.5mm max. (Tip of the shaft applied 2.5N/250gf) |
| Electrical Characteristics | |
| Total resistance | 5K20% |
| Residual resistance | 50 max |
| Resistance taper | B curve (4060% at 150) |
| Rating power | 0.05W |
| Maximum operating voltage | DC 10V, AC 50V |
| Slider noise | 100mV max |
| Insulation resistance | 100M min. at DC 250V |
| Voltage proof | 300V AC for 1 minute |
| Soldering heat-resistance | 3505 at 3 sec |
| Usage environment temperature | -30+70 |
| Rotational life | 15% max resistance change after 15,000200 cycles (600 r.p.h. without load) |
| Storage temperature range | -40+70 |
| Recommended Conditions of Dip Soldering | |
| Board | One sided copper foil |
| Fluxing | Min. 0.82 density flux |
| Preheating | Board surface: 100 max within 2 minutes |
| Soldering | 260 max within 10 sec (1 to 2 times) |
2412161740_CTR-R09711N0-FR20A13-B502-00Y_C42414342.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
