<
>
Specifications
Voltage Rating:
20V
Tolerance:
±20%
Power(Watts):
100mW
Resistance:
20kΩ
Mfr. Part #:
R16156NG-KA15D6.5-B203-000
Package:
Through Hole
Key Attributes
Model Number:
R16156NG-KA15D6.5-B203-000
Product Description
Product Overview
This document outlines the specifications for the R161G Dual Unit Series potentiometers from DONG GUAN IDEAL ELECTRONICS & TECHNOLOGY CO.,LTD. It details mechanical and electrical characteristics, applicable models, construction, appearance guidelines, and soldering conditions.
Product Attributes
- Brand: IDEAL ELECTRONICS & TECHNOLOGY CO.,LTD.
- Origin: DONG GUAN
- Model Series: R161G Dual Unit Series
Technical Specifications
| ITEM | SPECIFICATION | UNIT | REMARKS |
| Mechanical characteristics | |||
| Total rotational angle | 3005 | ||
| Rotational torque | 20-100gf.cm | (at 60/step) | |
| Rotational stopper strength | 6kgf.cm | R2-3 | |
| Push-pull strength | 7Kgf.max. | ||
| Shaft wobble | 0.7L/30mm p-p max | ||
| Bushing mount Strength | 5kgf.cm | (for shaft with mounting holes) | |
| Numder of click | 250gf.cm | (for shaft with mounting holes) | |
| Click sliout force | 30 | ||
| Electrical characteristics | |||
| Total resistance | 20 K 20% | R1-2 | |
| Total resistance tolerane | 20 | 8H | |
| Resistance taper | B taper | 0.1W | |
| Ratings power | other taper | 0.05W | |
| Maximum operating voltage | B taper 150V AC | ||
| other taper 20V DC | |||
| Slider noise | 3dB Max.(-40~0dB) | mv | |
| Gang error | |||
| Insulation resistance | 100M min. | at 500V DC | |
| Voltage proof | 1 minute at 500V AC | ||
| Rotational life | 10,000 cycles | ||
| Work temperature | -10~+70 | ||
| Storage temperature | -25~+75 | ||
| Storage conditions | Refer to storage condition notes | ||
| Salt Mist | Refer to storage condition notes | ||
Soldering Specifications
| ITEM | SPECIFICATION | UNIT | REMARKS |
| Lead-free solder specifications | |||
| Soldering conditions | Potentiometer placed in the following 1.6mm thickness of single layer printed circuit board | ||
| Manual soldering | Shall not be more than one back. | For manual soldering | |
| Automated or semi-automated soldering equipments | Warm-up time of no more than two minutes, solder junction (ie, circuit board at the end of) the maximum preheat temperature does not exceed 100 | ||
| Soldering process machine set the temperature below 260 , 4 seconds or less | If the potentiometer with anchor points for the product, please adjust the spindle or push handle to one of the first and only on a stall can be solder operation | ||
| Hand-soldering, automatic or semi-automatic solder machine | To be performed within 3 seconds at 350 or below. | ||
2409302201_CTR-R16156NG-KA15D6-5-B203-000_C18213439.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
