<
>
Specifications
Voltage Rating:
5V
Tolerance:
±10%
Power(Watts):
50mW
Resistance:
10kΩ
Mfr. Part #:
R08401GM-FF20C8.0-B103-000
Package:
Through Hole
Key Attributes
Model Number:
R08401GM-FF20C8.0-B103-000
Product Description
Product Overview
The R084 Potentiometer Compound Series is a versatile electronic component designed for various applications. It combines encoder and potentiometer functionalities, offering precise control and feedback. This product adheres to RoHS directives and is manufactured in China.
Product Attributes
- Applicable Models: R084 Potentiometer compound Serial
- Origin: China
- Certifications: RoHS compliant
- Environmental Requisition: This product is compliant with RoHS Directive
Technical Specifications
| Section | Item | Specification | Details |
| General Information | Usage environment temperature | -20+70 | |
| General Information | Storage environment temperature | -40+70 | |
| General Information | Test condition | Temperature: 5~35, Humidity: 45~85%HR | |
| General Information | Soldering heat-resistance (Manual) | Max. 3505 at 3 sec | |
| General Information | Soldering heat-resistance (Auto) | Max. 2605 at 3 Sec. | Preheating temperature of board surface: 100 max. at within 1 minutes. |
| General Information | Soldering heat-resistance (Note) | Not applicable to reflow soldering. | |
| Construction | Appearance | Every part should be finished, not exist rust flaw, crack, and bad plating. | |
| Construction | Measurements | Under conditions prescribed by design drawing. | |
| Mechanical Characteristics | Potentiometer Total rotational angle | 30010 | |
| Mechanical Characteristics | Potentiometer Rotational torque | 20~120gf.cm | |
| Mechanical Characteristics | Potentiometer Detent quantity | 0, 1 | Applies when detent quantity is not "0". |
| Mechanical Characteristics | Potentiometer Detent torque | 50~250gf.cm | |
| Mechanical Characteristics | Potentiometer Rotational stopper strength | 3Kgf.cm | |
| Mechanical Characteristics | Shaft Pull-Push Strength | 8Kgf.cm | |
| Mechanical Characteristics | Nut tightening strength | 8Kgf.cm | |
| Mechanical Characteristics | Shaft wobble | < 0.5*shaft long L size/20mm | Applied 250gf on the tip of the single shaft. |
| Electrical Characteristics (Potentiometer) | Total resistance | 10 K10% | R1, R2 |
| Electrical Characteristics (Potentiometer) | End resistance (Terminals 1-2, 2-3) | 10 (for R10K) | 20 (for 10KR250K); 0.1% R (for R250K) |
| Electrical Characteristics (Potentiometer) | Resistance taper | A, B, C | |
| Electrical Characteristics (Potentiometer) | Ratings power | 0.05W (B Taper) | 0.025W (Other taper) |
| Electrical Characteristics (Potentiometer) | Maximum operating voltage | 10V DC or 50V AC (B Taper) | 5V DC or 25V AC (Other taper) |
| Electrical Characteristics (Potentiometer) | Slider noise | <100mV | |
| Electrical Characteristics (Potentiometer) | Insulation resistance | >100M (at 250V DC) | |
| Electrical Characteristics (Potentiometer) | Voltage proof | 300V AC for 1 minute | |
| Electrical Characteristics (Potentiometer) | Rotational life | 10,000 cycles, 30,000 cycles | Permissible resistance change 15% max. under no load at 600 cycles/hour. |
| Switch Characteristics | Apply/Not Apply | Apply | |
| Switch Characteristics | Switch type | Push type | |
| Switch Characteristics | Switch configuration, Contact point | Single Pole Single Throw (S.P.S.T) | |
| Switch Characteristics | Switch working angle | DC 12V, 0.5A | |
| Switch Characteristics | Switch push travel | 0.5+0.3/-0.3mm | |
| Switch Characteristics | Switch push pressure | 600200gf | |
| Switch Characteristics | Switch contact resistance | 50m | Afterlife cycle: 200m |
| Switch Characteristics | Switch operating life | 10,000 cycles | Under no load at 600 pushes/hour. Afterlife cycle: Withstanding voltage AC100V for 1 min (no insulation breakdown), meets push pressure spec, no damage to appearance/structure. |
2410121256_CTR-R08401GM-FF20C8-0-B103-000_C18213443.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
