<
>
Specifications
Voltage Rating:
10V
Tolerance:
±10%
Power(Watts):
50mW
Resistance:
100kΩ
Mfr. Part #:
R08717N0-GK134S55B104-00G
Package:
Through Hole
Key Attributes
Model Number:
R08717N0-GK134S55B104-00G
Product Description
Product Overview
This 8mm size metal shaft type encoder is designed for use in automotive, audio-visual, radio, and communication equipment. It offers reliable performance with specified electrical, mechanical, and durability characteristics.
Product Attributes
- Applicable Models: R08717N0GK134S55B104-00G
- Brand: DONG GUAN CHANG TAI ER ELECTRONICS CO.,LTD
- Origin: China (Implied by manufacturer location)
- Certifications: ROHS Directive compliant, IPX7 Waterproof
- Shaft Material: Stainless steel
Technical Specifications
| Category | Item | Specification |
|---|---|---|
| General Information | Operating Temperature Range | -20+70 |
| Storage Temperature Range | -30+85 | |
| Test Condition (Standard) | Temperature: 535, Moisture: 2585%RH, Air Pressure: 86106kPa | |
| Test Condition (Doubt) | Temperature: 201, Moisture: 6367%RH, Air Pressure: 86106kPa | |
| Appearance and Dimensions | Appearance | No harmful rust, cracks, scratches and poor plate under functioning. |
| Dimensions | Refer to attached drawing | |
| Electrical Characteristics | Total Resistance | 100K10% |
| Resistance Taper | 0B curve | |
| Rating Power (50) | 0.05W | |
| End Resistance (Terminals 1-2) | 50 max. | |
| End Resistance (Terminals 2-3) | 50 max. | |
| Slider Noise | 100mV max. | |
| Insulation Resistance | 100M min. at DC 250V | |
| Voltage Proof | 1 minute at 300V AC | |
| Maximum Operating Voltage | DC 10V, AC 50V | |
| Mechanical Characteristics | Shaft Material | Stainless steel |
| Total Rotational Angle | 3005 | |
| Rotational Torque | 2.0 to 24.5m N.m (20 to 250gf.cm) at 20; 49.1mN.m max (500gf.cm max) at -20 | |
| Shaft Stopper Strength | 4.5 Kgf.cm | |
| Shaft Wobble (Radial) | 0.5(shaft/30) mm max. | |
| Shaft Wobble (Axial) | 0.5 mm max. | |
| Shaft Pull Strength | 98.1N min (10Kgf min) | |
| Shaft Push Strength | 98.1N min (10Kgf min) | |
| Nut Tightening Strength | 0.784N.m min (8Kgf.cm min) | |
| Durability Characteristics | Solderability | Minimum 75% surface coverage of uniform solder coating; Solder Temperature: 2355; Solder Dipping Time: 30.5 sec |
| Soldering Heat-Resistance (Manual) | Max. 3505 at 3 sec | |
| Soldering Heat-Resistance (Auto) | Max. 260 5 at 3 sec | |
| Rotational Cycle | 15,000200 cycles (at 600 r.p.h. without load); Permissible resistance change: 15% max. | |
| IPX7 Waterproof | Scalability | Install on machine and place in 1m depth for 30 minutes. |
| Environmental Requisition | Compliance | ROHS Directive |
2409271933_CTR-R08717N0-GK134S55B104-00G_C18213455.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
