<
>
Specifications
Voltage Rating:
5V
Tolerance:
±10%
Power(Watts):
50mW;25mW
Resistance:
10kΩ;50kΩ
Mfr. Part #:
R08408GS-FF17C6.0-1B103/A503-00Y
Package:
Through Hole
Key Attributes
Model Number:
R08408GS-FF17C6.0-1B103/A503-00Y
Product Description
Product Overview
This document specifies the R084 Potentiometer compound series, a versatile component designed for various applications. It combines encoder and potentiometer functionalities, offering precise control and feedback. The product adheres to RoHS directives and is manufactured in China.
Product Attributes
- Applicable Models: R084 Potentiometer compound Serial
- Environmental Requirements: RoHS Compliant
- Country of Origin: China
Technical Specifications
| Feature | Specification | Details |
|---|---|---|
| General Information | Usage Environment Temperature | -20+70 |
| Storage Environment Temperature | -40+70 | |
| Test Conditions | Temperature: 5~35, Humidity: 45~85%RH | |
| Soldering Heat Resistance | Manual: Max 3505 at 3 sec; Auto: Max 2605 at 3 sec. Preheating: Max 100 within 1 min. Not applicable for reflow soldering. | |
| Mechanical Characteristics | Potentiometer Total Rotational Angle | 30010 |
| Potentiometer Rotational Torque | 20~120 gf.cm | |
| Potentiometer Detent Quantity | 0, 1, 3 | |
| Potentiometer Detent Torque | 50~250 gf.cm (Applicable when detent quantity is not "0") | |
| Potentiometer Rotational Stopper Strength | 3 Kgf.cm | |
| Shaft Pull-Push Strength | 8 Kgf.cm | |
| Nut Tightening Strength | 10 Kgf.cm | |
| Electrical Characteristics of Potentiometer | Total Resistance | R1: 10 K10%; R2: 50 K10% |
| End Resistance (Terminals 1-2, 2-3) | 10 for R10K; 20 for 10KR250K; 0.1% R for R250K | |
| Resistance Taper | A < R 2 >, B < R 1 > | |
| Rated Power | B Taper: 0.05W; Other Taper: 0.025W | |
| Maximum Operating Voltage | B Taper: 10V DC or 50V AC; Other Taper: 5V DC or 25V AC | |
| Slider Noise | <100mV | |
| Insulation Resistance | 250V DC, >100M | |
| Voltage Proof | 300V AC for 1 minute | |
| Rotational Life | 10,000 cycles or 30,000 cycles (Max resistance change 15% under no load at 600 cycles/hr) | |
| Switch Characteristics | Applicability | Apply / No Apply |
| Switch Type | Rotary Type | |
| Switch Circuit | Single Pole Single Throw (S.P.S.T) | |
| Switch Rated Power | 12V DC 1A | |
| Switch Contact Resistance | 100 m, 500 m after afterlife cycle | |
| Switch Working Angle | 5010 | |
| Switch Working Torque | 120~250 gf.cm | |
| Switch Life | 10,000 Cycles | |
| Waterproof Standard Characteristics | Standard | Grade -7 Of Waterproof standard (Shaft and Bush in 1M deep water for 30 min, other components sealed in standard atmosphere, no water ingress) |
2410121256_CTR-R08408GS-FF17C6-0-1B103-A503-00Y_C18213445.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
