<
>
Specifications
Voltage Rating:
12V
Tolerance:
±20%
Power(Watts):
25mW
Resistance:
10kΩ
Mfr. Part #:
R09710NS-FB15D7.0-A103-0044Y
Package:
Through Hole
Key Attributes
Model Number:
R09710NS-FB15D7.0-A103-0044Y
Product Description
Potentiometer Approval Sheet & Specifications
This document outlines the approval sheet and technical specifications for the R09710NS-FB15D7.0-A103-0044Y potentiometer, manufactured by Dong Guan Chang Tai Er Electronics Co., Ltd. It details general, mechanical, electrical, and switch performance characteristics, as well as environmental and soldering requirements.
Product Attributes
- Part Number: R09710NS-FB15D7.0-A103-0044Y
- Brand: Chang Tai Er
- Manufacturer: Dong Guan Chang Tai Er Electronics Co., Ltd.
- Origin: CHINA
- Certifications: ISO9001:2015, ISO14001:2015, RoHS compliant, IATF 16949:2016
- Product Category: Potentiometer
Technical Specifications
| Feature | Specification | Notes |
|---|---|---|
| Applicable Models | R095, R096, R097, R098, R09J, R09P, R09B Series | |
| Usage Environment Temperature | -10+70 or -20+70 | Selection required |
| Storage Environment Temperature | -40+85 | |
| Test Condition | Temperature: 5~35, Humidity: 45~85%HR | |
| Soldering Heat Resistance (Manual) | Max 3505, 3 sec | 1-2 times |
| Soldering Heat Resistance (Auto) | Max 2605, 3 sec | Board preheating max 100 within 1 min, 1-2 times |
| Appearance | Complete, no rust, cracks, or plating defects | |
| Total Rotational Angle | 30010 | |
| Rotational Torque | 10~200 gf.cm | Rotational velocity: 60/1 Sec. |
| Detent Torque | 80~250 gf.cm | |
| Detent Quantity | 0, 1, 21, 41 | Selection required |
| Rotational Stopper Strength | 3Kgf.cm, 4Kgf.cm, 5Kgf.cm, 8Kgf.cm | Selection required |
| Pull-Push Strength of Shaft | 8Kgf, 10Kgf | Selection required |
| Nut Tightening Strength | 10Kgf.cm | |
| Shaft Wobble | < 0.7*shaft long L size/20mm at 250gf | |
| Total Resistance | 10 K20%, K10%, K+%/-% | Selection required |
| Resistance Taper | B, A, C | Selection required |
| End Resistance (Terminal 1-2, 2-3) | R10K: 10; 10KR250K: 20; R250K: 0.1%R | |
| Ratings Power (B Taper) | 0.05W | |
| Ratings Power (Other Taper) | 0.025W | |
| Maximum Operating Voltage (B Taper) | 20V DC or 50V AC | |
| Maximum Operating Voltage (Other Taper) | 12V DC or 25V AC | |
| Slider Noise | <100mV | |
| Gang Error | 4dB (-40dB~0dB) or 3dB (-40dB~0dB) | Apply to Dual-Unit only |
| Insulation Resistance | >100M at 250V DC | |
| Voltage Proof | 300V AC for 1 minute | |
| Rotational Life | 10,000 cycles, 15,000 cycles, 30,000 cycles | Max 15% resistance change at 600 r./h without load |
| Switch Applicable | Apply / No apply | Selection required |
| Switch Type | Rotary type or Push-Push type | Selection required |
| Switch Circuit | S.P.S.T | |
| Switch Ratings Power (Rotary) | 12V DC 1A | |
| Switch Ratings Power (Push-Push) | 12V DC 0.5A | |
| Switch Contact Resistance | Initial: 100 m max. After 10,000 cycles: 1 max. | |
| Switch Working Angle/Track (Rotary) | 5010 | |
| Switch Working Track (Push-Push) | 0.5mm or 1.5mm | Specific reference to drawing |
| Switch Working Torque (Rotary) | 800 gf.cm max. | |
| Switch Working Torque (Push-Push) | 700300 gf | |
| Switch Life | 10,000 cycles | |
| Waterproof Standard | No apply or Grade -7 | Grade -7: Potentiometer shaft/bush in 1m water for 30 min, other components sealed. |
2412161740_CTR-R09710NS-FB15D7-0-A103-0044Y_C42414338.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
