<
>
Specifications
Voltage Rating:
5V
Tolerance:
±1%
Power(Watts):
0.03125mW
Resistance:
10kΩ
Mfr. Part #:
ED10R1B0-FB12S5.0-05A103-1000
Package:
Through Hole
Key Attributes
Model Number:
ED10R1B0-FB12S5.0-05A103-1000
Product Description
Product Overview
This specification sheet details the ED10R1B0-FB12S5.0-05A103-1000 encoder, designed for home appliance applications. It offers precise mechanical and electrical characteristics, durability, and compliance with stringent operating conditions.
Product Attributes
- Model: ED10R1B0-FB12S5.0-05A103-1000
- Edition: 1.0
- Origin: DONG GUAN CHANG TAI ER ELECTRONICS CO.,LTD
- Application: Home appliances
Technical Specifications
| Item | Specifications | Condition |
|---|---|---|
| 1. General Information | ||
| Operating temperature range | -30 +70 | |
| Storage temperature range | -40+85 | |
| Test condition | Temperature 535Moisture: 4585%RH | Standard condition |
| 2. Appearance and Dimensions | ||
| Appearance | No harmful rust, cracks, scratches and poor under functioning | |
| 3. Mechanical Characteristics | ||
| Shaft material | Stainless steel | |
| Detent torque | 100~300 gf.cm | (before reflow test and cycle test) |
| Number of detent | 24 detents | |
| Total rotational angle | 3005 | |
| Shaft stopper strength | 3.0 kgf.cm min | |
| Terminal strength | Shall be free from terminal looseness damage and breakage of terminal soldering position. Terminals may be bent after test. But electrical performance requirements specified in item 4 shall be satisfied. | A static load of 4.9N(0.5kgf) shall be applied to the tip of terminal for 10S in a desired direction. The test shall be done once per terminal |
| Axial pull | 98.1N min (10kgf min) | Static load |
| Axial push | 98.1N min (10kgf min) | Static load |
| Lateral push strength | 98.1N min (10kgf min) | Static load |
| Shaft wobble | 0.7L/30 (L: Measurement point from mounting surface of bushing) | (mm p-p less) |
| Soldering Heat Resistance | A: Hand soldering: 3505/ 3S Max. B: Auto soldering max, 2605. at 3 Sec. | |
| Solderability | A new uniform coating of solder shall cover a minimum of 75% of the surface being immersed. NO abnormalities shall be observed in appearance and operation. The electrical performance requirements specified in item 4 shall be satisfied. | Solder temperature: 2355, Solder dipping time: 3.50.5S |
| Water proof grade | IP67 | |
| 4. Electrical Characteristics | ||
| Total resistance | 05A10K1% | |
| Power rating | 1/32W | |
| Maximum operating voltage | DC 15V | |
| Insulation resistance | 100MMIN | DC250V 1min5S, Between all terminals and ground(frame) |
| Voltage proof | No subversion on insulation resistance | AC250V 1minute, Between all terminals and ground(frame) |
| 5. Durability | ||
| Rotational life | Total resistance: 05A10K1%, Detent torque: 50 gf.cm min. | 15,000 cycles at 720 cycles /H ( without load ) |
| Cold resistance | Specification in clause 3, 4 shall be satisfied. | -40 96 hours left without loading. |
| Heat resistance | 85 96 hours left without loading. | |
| Moisture resistance | 40 90-95%RH 96 hours left without loading. | |
2410121328_CTR-ED10R1B0-FB12S5-0-05A103-1000_C18213501.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
