<
>
Specifications
Voltage Rating:
10V
Tolerance:
±20%
Power(Watts):
10mW
Resistance:
100kΩ
Mfr. Part #:
C0510N-H2.0-B104-00S
Package:
SMD
Key Attributes
Model Number:
C0510N-H2.0-B104-00S
Product Description
Product Overview
The C0510N SERIES GENERAL SPECIFICATION applies to the C0510N model, primarily used for consumer products. It outlines the operational and storage temperature ranges, standard test conditions, and detailed technical specifications for its mechanical and electrical characteristics, as well as endurance and packing details.
Product Attributes
- Brand: DONG GUAN CHANG TAI ER ELECTRONICS CO.,LTD
- Model: C0510N Series
Technical Specifications
| Item | Conditions | Specifications |
| Scope | C0510N | |
| Operating temperature range | -10~70 | |
| Storage temperature range | -30~70 | |
| Test conditions: Standard atmospheric conditions | ambient temperature 5~35, relative humidity 45~85%; air pressure 86kpa to 106kpa | |
| Test conditions: Measurement limit | ambient temperature 202, relative humidity 60~70%, air pressure 86kpa to 106kpa | |
| ENDURANCE CHARACTERISTICS: Resistance to soldering heat | Peak: 2605,5sec max. | Change in total resistance is relative to the value before test: 5%, without case deformation of case or terminals loosing. Electrical characteristics shall be satisfied with specification. |
| ENDURANCE CHARACTERISTICS: Resistance to heat | After 2408 hours of storage in the constant temperature tank at 702C, it should be kept at room temperature for 1 hour. | Change in total resistance is relative to the value before test: 20%; |
| ENDURANCE CHARACTERISTICS: Resistance to cold | After 964 hours of storage in the constant temperature tank at -253, it should be kept at room temperature for 1.5hour. | Change in total resistance is relative to the value before test: 20%; |
| ENDURANCE CHARACTERISTICS: Damp heat | Temperature 402C, and humidity is 90-95%. After placed in the constant temperature and humidity tank for 944 hours, it should be kept at room temperature for 1 hour. | Change in total resistance is relative to the value before test: 20%; |
| CONSTRUCTION: Appearance | EVRY PART SHOULD BE FINISHED NOT TO EXIST RUSTFLAW CRACK AND PLATING | |
| Mechanical characteristics: Total Sliding Travel | 5.0mm0.5mm | |
| Mechanical characteristics: Operating force | 10 to40 gf | |
| Mechanical characteristics: Lever stopper strength | 2.5Kgf Min | |
| Mechanical characteristics: Push-Pull Strength | 1Kgf max.at 5Sec 10Sec | |
| Mechanical characteristics: Number of Detents(Click) | 1C 7C 11C 21 41 | |
| Electrical characteristics: Total resistance | 100K20% | |
| Electrical characteristics: End resistance Term 1~2 | Less than 1 k | |
| Electrical characteristics: End resistance Term 2~3 | Less than 1 k | |
| Electrical characteristics: Resistance taper | A B C D W | |
| Electrical characteristics: Ratings power Taper B | 0.01W | |
| Electrical characteristics: Ratings power Other taper | 0.025W | |
| Electrical characteristics: Maximum operating voltage Taper B | AC50V | |
| Electrical characteristics: Maximum operating voltage Other taper | AC25V | |
| Electrical characteristics: Slider noise | Less then 100mV | |
| Electrical characteristics: Insulation resistance | at DC 100V | More then 50M |
| Electrical characteristics: Voltage proof | 1 minute at 100V AC | |
| PACKING: Packing Portion | Packed with braided tape, 1000PCS per tray, 4 trays per carton. A total of 7000 PCS |
2410121252_CTR-C0510N-H2-0-B104-00S_C18213448.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
