<
>
Specifications
Voltage Rating:
10V
Tolerance:
±20%
Power(Watts):
50mW
Resistance:
10kΩ
Mfr. Part #:
R08719NS-FE12.7S5.5-1B103-0081
Package:
Through Hole
Key Attributes
Model Number:
R08719NS-FE12.7S5.5-1B103-0081
Product Description
Product Overview
This specification applies to the 8mm size metal shaft type encoder used in vehicle, audio-visual, radio, and communication equipment. It features a total resistance of 10K20% with a 1B taper, a power rating of 0.05W at 50, and a rotational angle of 3005. The encoder is constructed with a stainless steel shaft (SUS303 4.75 round strip) and includes a rotary switch with S.P.S.T configuration, rated for DC 16V-3A. It is compliant with the ROHS Directive.
Product Attributes
- Applicable Models: R08719NS-FE12.7S5.5-1B103-0081
- Brand: DONG GUAN CHANG TAI ER ELECTRONICS CO.,LTD
- Certifications: ROHS Directive
Technical Specifications
| Category | Item | Specification |
| General Information | Applicable Models | R08719NS-FE12.7S5.5-1B103-0081 |
| Applying Range | 8mm size metal shaft type encoder for vehicle, audio-visual, radio, and communication equipment. | |
| Operating Temperature Range | -30+70 | |
| Storage Temperature Range | -40+85 | |
| Test Condition (Standard) | Temperature: 535, Moisture: 2585%RH, Air Pressure: 86106kPa | |
| Test Condition (Doubtful Judgment) | Temperature: 201, Moisture: 6367%RH, Air Pressure: 86106kPa | |
| Appearance and Dimensions | Appearance | No harmful rust, cracks, scratches, and poor plating under functioning. |
| Electrical Characteristics | Total Resistance | 10K20% |
| Resistance Taper | 1B curve (4060% at 170) | |
| Ratings Power (50) | 0.05W | |
| End Resistance (Terminals 1-2) | 20 max | |
| End Resistance (Terminals 2-3) | 20 max | |
| Slider Noise | 100mV max (JIS-C-6443 method) | |
| Insulation Resistance | 100M min. at DC 250V | |
| Voltage Proof | 1 minute min at 300V AC | |
| Maximum Operating Voltage | DC 10V, AC 50V | |
| Mechanical Characteristics | Shaft Material | Stainless steel (SUS303 4.75 round strip) |
| Total Rotational Angle | 3005 | |
| Rotational Torque | 2.4 to 24.5m N.m (25 to 250gf.cm) at 20; 49 mN.m max (500gf.cm max) at -30 | |
| Shaft Stopper Strength | 0.3N.m min (3Kgf.cm min) | |
| Shaft Wobble and Bend (Radial) | 0.5(shaft/30) mm max. | |
| Shaft Wobble and Bend (Axial) | 0.5 mm max. | |
| Shaft Pull Strength | 98.1N min (10Kgf min) | |
| Shaft Push Strength | 98.1N min (10Kgf min) | |
| Nut Tightening Strength | 0.981N.m min (10Kgf.cm min) | |
| Durability Characteristics | Solderability | 95% min surface coverage after immersion; Solder temperature: 2355; Solder dipping time: 30.5 sec |
| Soldering Heat-Resistance (Manual) | Max. 3505 at 3 sec | |
| Soldering Heat-Resistance (Auto) | Max. 260 5 at 3 sec | |
| Rotational Life | 15,000200 cycles (600 r.p.h. without load); Resistance change within 15% max. | |
| Switch Characteristics | Switch Type | Rotary |
| Switch Configuration | Single Pole Single Throw (S.P.S.T) | |
| Switch Ratings Power | DC 16V-3A | |
| Switch Working Angle | 50 max | |
| Switch Working Torque | 78.5mN.m (800gf.cm max) | |
| Switch Life | 10,000 cycles without load | |
| Switch Contact Resistance | 50 m max (initial); 200 mMax (after 10000 cycles) | |
| Marking | Lot Number | Included |
| Environmental Requirements | Compliance | ROHS Directive |
2410121315_CTR-R08719NS-FE12-7S5-5-1B103-0081_C18213458.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
