<
>
Specifications
Voltage Rating:
20V
Tolerance:
±20%
Power(Watts):
50mW
Resistance:
50kΩ
Mfr. Part #:
R11112N0-FA15B4.5-B503-000
Package:
SIP-4
Key Attributes
Model Number:
R11112N0-FA15B4.5-B503-000
Product Description
Potentiometer Specifications - R111 Series
This document outlines the specifications for the R111 Series Potentiometers. These potentiometers are designed for various applications requiring precise resistance control within specified environmental and electrical parameters. They are compliant with RoHS directives and suitable for standard soldering processes.
Product Attributes
- Model Series: R111
- Country of Origin: China
- Environmental Compliance: RoHS Directive
Technical Specifications
| Category | Specification | Details |
|---|---|---|
| General Information | Applicable Models | R111 Series |
| Usage Environment Temperature | -10+70 or -20+70 | |
| Storage Environment Temperature | -20+70 or -40+70 | |
| Test Condition | Temperature: 5~35, Humidity: 45~85%RH | |
| Soldering Heat-Resistance (Manual) | Max. 3505 at 3 sec. | |
| Soldering Heat-Resistance (Auto) | Max. 2605 at 3 sec. Preheating: Max. 100 within 1 min. (1-2 times) | |
| Note on Soldering | Not applicable for reflow soldering. | |
| Construction | Appearance | Parts should be complete, without rust, cracks, or plating defects. |
| Dimensions | As per design drawing. | |
| Mechanical Characteristics | Total Rotational Angle | 30010 |
| Rotational Torque | 20~200 gf.cm (Rotational velocity: 60/1 Sec.) | |
| Detent Torque | 40~250 gf.cm | |
| Rotational Stopper Strength | 3 Kgf.cm | |
| Pull-Push Strength of Shaft | 5 Kgf | |
| Nut Tightening Strength | 8 Kgf.cm (Applies to models with bushing only) | |
| Shaft Wobble | Radial deviation < 0.7*Shaft Length L size/20mm (at 250gf on shaft tip) | |
| Electrical Characteristics | Total Resistance | Options include 50 K20%, K10%, K+%/-% |
| Resistance Taper | Options: A, B, C | |
| End Resistance (Terminal: 1-2, 2-3) | 10 (for R10K); 20 (for 10KR250K); 0.1%R (for R250K) | |
| Rated Power | 0.05W | |
| Maximum Operating Voltage | 20V DC or 50V AC | |
| Slider Noise | <100mV | |
| Gang Error | 4dB or 3dB (for Dual-Unit models, -40dB~0dB range) | |
| Insulation Resistance | 100M at 250V DC | |
| Voltage Proof | 250V AC for 1 minute | |
| Rotational Life | Options: 10,000 cycles or 15,000 cycles | |
| Note on Rotational Life | Without load, 600 cycles/hour rotation, permissible resistance change 15% max. |
2410121231_CTR-R11112N0-FA15B4-5-B503-000_C19712526.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
