<
>
Specifications
Voltage Rating:
10V
Tolerance:
±20%
Power(Watts):
25mW
Resistance:
20kΩ
Mfr. Part #:
R09710NS-FB15A7.0-A203-005
Package:
Through Hole
Key Attributes
Model Number:
R09710NS-FB15A7.0-A203-005
Product Description
Product Overview
This document outlines the specifications for the R095, R096, R097, R098, R09J, R09P, and R09B series potentiometers. These potentiometers are designed for various applications with specific environmental and electrical requirements, including compliance with RoHS directives.
Product Attributes
- Brand: DONG GUAN CHANG TAI ER ELECTRONIC CO., LTD.
- Origin: China
- Certifications: RoHS Directive compliant
Technical Specifications
| Section | Specification | Details |
| General Information | Applicable Models | R095, R096, R097, R098, R09J, R09P, R09B Series |
| General Information | Usage Environment Temperature | -10+70 or -20+70 |
| General Information | Storage Environment Temperature | -40+85 |
| General Information | Test Condition | Temperature: 5~35, Humidity: 45~85%HR |
| General Information | Soldering Heat-Resistance | Manual: Max 3505 at 3 sec. Auto: Max 2605 at 3 sec. Preheating: Max 100 at within 1 min. (1-2 times) |
| Construction | Appearance | Parts should be complete, without rust, cracks, or bad plating. |
| Construction | Dimensions | Under conditions prescribed by design drawing. |
| Mechanical Characteristics | Total Rotational Angle | 30010 |
| Mechanical Characteristics | Rotational Torque | 10~200gf.cm (Rotational velocity: 60/1 Sec.) |
| Mechanical Characteristics | Detent Torque | 80~250gf.cm |
| Mechanical Characteristics | Detent Quantity | 0, 1, 21, 41 |
| Mechanical Characteristics | Rotational Stopper Strength | 3Kgf.cm, 8Kgf.cm, 4Kgf.cm, 5Kgf.cm |
| Mechanical Characteristics | Pull-Push Strength of Shaft | 8Kgf, 10Kgf |
| Mechanical Characteristics | Nut Tightening Strength | 10Kgf.cm |
| Mechanical Characteristics | Shaft Wobble | Radial deviation < 0.7*shaft long L size/20mm at 250gf on shaft tip. |
| Electrical Characteristics | Total Resistance | 20 K20%, K10%, K+/-% |
| Electrical Characteristics | Resistance Taper | B, A, C |
| Electrical Characteristics | End Resistance (Terminal 1-2, 2-3) | R10K: 10; 10KR250K: 20; R250K: 0.1%R |
| Electrical Characteristics | Ratings Power | B Taper: 0.05W, Other Taper: 0.025W |
| Electrical Characteristics | Maximum Operating Voltage | B Taper: 20V DC or 50V AC. Other Taper: 12V DC or 25V AC. |
| Electrical Characteristics | Slider Noise | <100mV |
| Electrical Characteristics | Gang Error | 4dB (-40dB~0dB) or 3dB (-40dB~0dB) (Dual-Unit only) |
| Electrical Characteristics | Insulation Resistance | >100M at 250V DC |
| Electrical Characteristics | Voltage Proof | 300V AC for 1 minute |
| Electrical Characteristics | Rotational Life | 10,000 cycles, 15,000 cycles, 30,000 cycles (Resistance change 15% max. at 600 cycles/hr without load) |
| Switch Characteristics | Applicable | Yes / No |
| Switch Characteristics | Switch Type | Rotary type, Push-Push type |
| Switch Characteristics | Switch Circuit | Single Pole Single Throw (S.P.S.T) |
| Switch Characteristics | Switch Ratings Power | Rotary Switch: 12V DC 1A. Push-Push Switch: 12V DC 0.5A. |
| Switch Characteristics | Switch Contact Resistance | Initial: 100 m max. After 10,000 cycles: 1 max. |
| Switch Characteristics | Switch Working Angle or Track | Rotary Switch: 5010. Push-Push Switch: 0.5mm or 1.5mm (refer to drawing). |
| Switch Characteristics | Switch Working Torque | Rotary Switch: 800gf.cm max. Push-Push Switch: 700300gf. |
| Switch Characteristics | Switch Life | 10,000 cycles |
| Waterproof Characteristics | Waterproof Standard | No apply or Grade -7 (Potentiometer shaft/bush in 1M water, other parts sealed in atmosphere for 30 min, no water ingress) |
2410121236_CTR-R09710NS-FB15A7-0-A203-005_C18213425.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
