<
>
Specifications
Voltage Rating:
5V
Tolerance:
±10%
Power(Watts):
25mW
Resistance:
10kΩ
Mfr. Part #:
R08408GS-FF17C6.0-A103/A103-00Y
Package:
Through Hole
Key Attributes
Model Number:
R08408GS-FF17C6.0-A103/A103-00Y
Product Description
ENCODER&POTENTIOMETER COMPOUND SPECIFICATIONS
This document outlines the specifications for the R084 Potentiometer compound series, designed for various applications requiring precise control and encoding. The product is compliant with RoHS directives and built to withstand specific environmental and soldering conditions.
Product Attributes
- Applicable Models: R084 Potentiometer compound Serial
- Origin: China
- Certifications: RoHS Directive compliant
Technical Specifications
| Section | Parameter | Specification | Details/Remarks |
| General Information | Usage Environment Temperature | -20+70 | |
| Storage Environment Temperature | -40+70 | ||
| Test Conditions | Temperature: 5~35, Humidity: 45~85%HR | ||
| Soldering Heat-Resistance | Manual Soldering | Max. 3505 at 3 sec | |
| Auto Soldering | Max. 2605 at 3 sec; Preheating temp. max. 100 within 1 min. | Not applicable for reflow soldering. | |
| Mechanical Characteristics | Potentiometer Total Rotational Angle | 30010 | |
| Potentiometer Rotational Torque | 20~120 gf.cm | ||
| Potentiometer Detent Quantity | 0, 1, 3 | ||
| Potentiometer Detent Torque | 50~250 gf.cm | Applies when detent quantity is not "0". | |
| Potentiometer Rotational Stopper Strength | 3 Kgf.cm | ||
| Shaft Pull-Push Strength | 8 Kgf.cm | ||
| Nut Tightening Strength | 10 Kgf.cm | ||
| Shaft Wobble | < 0.5*shaft long L size/20mm at 250gf on shaft tip | ||
| Electrical Characteristics of Potentiometer | Total Resistance | 10 K10% | R1, R2 |
| End Resistance (Terminals 1-2, 2-3) | 10 (R10K); 20 (10KR250K); 0.1% R (R250K) | ||
| Resistance Taper | A, B, C | ||
| Rated Power | 0.05W (B Taper); 0.025W (Other tapers) | ||
| Maximum Operating Voltage | 10V DC or 50V AC (B Taper); 5V DC or 25V AC (Other tapers) | ||
| Slider Noise | <100mV | ||
| Rotational Life | 10,000 cycles or 30,000 cycles | Without load, 600 r./h rotation, resistance change 15% max. | |
| Switch Characteristics | Switch Type | Rotary Type | |
| Switch Circuit | Single Pole Single Throw (S.P.S.T) | ||
| Switch Ratings Power | 12V DC 1A | ||
| Switch Contact Resistance | 100 m; 500 m after life cycle | ||
| Waterproof Standard Characteristics | Waterproof Standard | Not Applicable or Grade -7 Of Waterproof standard | |
| Grade -7 Description | Shaft/Bush in 1M water, other sealed parts in atmosphere for 30 min, no water ingress. |
2410121256_CTR-R08408GS-FF17C6-0-A103-A103-00Y_C18213444.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
