<
>
Specifications
Voltage Rating:
20V
Tolerance:
±10%
Power(Watts):
50mW
Resistance:
20kΩ
Mfr. Part #:
R09522G0-FB17A9.0-B203-00A
Package:
Through Hole
Key Attributes
Model Number:
R09522G0-FB17A9.0-B203-00A
Product Description
Potentiometer Specifications
This document outlines the specifications for the R095, R096, R097, R098, R09J, R09P, and R09B series potentiometers. These components are designed for various applications requiring precise resistance control and optional switching functions. They are manufactured to meet environmental and performance standards, including RoHS compliance.
Product Attributes
- Applicable Models: R095, R096, R097, R098, R09J, R09P, R09B Series
- Origin: China
- Environmental Requisition: RoHS Directive Compliant
Technical Specifications
| Section | Item | Specification | Notes |
| 1. General Information | Usage Environment Temperature | -10+70 or -20+70 | Checkbox options |
| 1. General Information | Storage Environment Temperature | -40+85 | |
| 1. General Information | Test Condition | Temperature: 5~35, Moisture: 45~85%HR | |
| 1. General Information | Soldering Heat-Resistance | Hand soldering: Max 3505 at 3 sec; Auto soldering: Max 2605 at 3 sec. Preheating of board surface: Max 100 within 1 minute. | Guaranteed for 1 to 2 times. |
| 2. Construction | Appearance | All parts complete, no rust, cracks, or bad plating. | |
| 2. Construction | Dimensions | As per design drawing. | |
| 3. Mechanical Characteristics | Total Rotational Angle | 30010 | |
| 3. Mechanical Characteristics | Rotational Torque | 10~200 gf.cm | Rotational velocity: 60/1 Sec. |
| 3. Mechanical Characteristics | Detent Torque | 80~250 gf.cm | |
| 3. Mechanical Characteristics | Detent Quantity | 0, 1, 21, 41 | Checkbox options |
| 3. Mechanical Characteristics | Rotational Stopper Strength | 3Kgf.cm, 8Kgf.cm, 4Kgf.cm, 5Kgf.cm | Checkbox options |
| 3. Mechanical Characteristics | Pull-Push Strength of Shaft | 8Kgf or 10Kgf | Checkbox options |
| 3. Mechanical Characteristics | Nut Tightening Strength | 10Kgf.cm | |
| 3. Mechanical Characteristics | Shaft Wobble | < 0.7*Shaft Length L size/20mm | Applied 250gf at the tip of the shaft. |
| 4. Electrical Characteristics | Total Resistance | Various K20%, 20 K10%, K+/-% | Checkbox options |
| 4. Electrical Characteristics | Resistance Taper | A, B, C | Checkbox options |
| 4. Electrical Characteristics | End Resistance (Terminal 1-2, 2-3) | R10K: 10; 10KR250K: 20; R250K: 0.1%R | |
| 4. Electrical Characteristics | Ratings Power | B Taper: 0.05W; Other taper: 0.025W | |
| 4. Electrical Characteristics | Maximum Operating Voltage | B Taper: 20V DC or 50V AC; Other taper: 12V DC or 25V AC | |
| 4. Electrical Characteristics | Slider Noise | < 100mV | |
| 4. Electrical Characteristics | Gang Error | 4dB or 3dB (-40dB~0dB) | Apply to Dual-Unit only. |
| 4. Electrical Characteristics | Insulation Resistance | >100M at 250V DC | |
| 4. Electrical Characteristics | Voltage Proof | 300V AC for 1 minute | |
| 4. Electrical Characteristics | Rotational Life | 10,000 cycles, 15,000 cycles, 30,000 cycles | Without load, 600 cycles/hour, resistance change 15% max. |
| 5. Switch Characteristics | Applicability | Apply or Not Apply | Checkbox options |
| 5. Switch Characteristics | Switch Type | Rotate type or Push-Push type | Checkbox options |
| 5. Switch Characteristics | Switch Circuit | Single Pole Single Throw (S.P.S.T) | |
| 5. Switch Characteristics | Switch Ratings Power | Rotate switch: 12V DC 1A; Push-Push switch: 12V DC 0.5A | |
| 5. Switch Characteristics | Switch Contact Resistance | Initial stage: 100m max.; After 10,000 cycles: 1 max. | |
| 5. Switch Characteristics | Switch Working Angle or Track | Rotate switch: 5010; Push-Push switch track: 0.5mm or 1.5mm | Specific reference to drawing for Push-Push switch. |
| 5. Switch Characteristics | Switch Working Torque | Rotate switch: 800gf.cm max.; Push-Push switch: 700300gf | |
| 5. Switch Characteristics | Switch Life | 10,000 cycles | |
| 6. Waterproof Characteristics | Waterproof Standard | Not Apply or Grade -7 | Grade -7: Potentiometer shaft/bush in 1M deep water, other components sealed, exposed to atmosphere for 30 mins, no water ingress. |
2412161740_CTR-R09522G0-FB17A9-0-B203-00A_C42414334.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
