Product Overview

The MS0630 series is a line of low-profile, high-current power inductors designed for various electronic applications. These inductors are suitable for battery-powered devices, DC/DC converters in distributed power systems, and DC/DC converters for field-programmable gate arrays (FPGAs). They offer a wide range of inductance values with precise specifications for DC resistance, heat rating current, and saturation current, operating within a temperature range of -55 to +125.

Product Attributes

• Brand: MOTTOTECHNOLOGY
• Series: MS0630
• Origin: SHENZHEN MOTTOTECHNOLOGY Co.,Ltd
• Website: http://www.coilmx.com
• Email: sales@mottotech.com

Technical Specifications

Product Identification: MS 0630 - 1R0 M - -

Notes:

• All test data is referenced to 25 ambient.
• Irms: DC current (A) that will cause an approximate T of 40.
• Isat: DC current (A) that will cause L0 to drop approximately 30%.
• Operating temperature range: -55 to +125.
• The part temperature (ambient + temp rise) should not exceed 125 under worst-case operating conditions. Factors affecting part temperature include circuit design, component, PWB trace size and thickness, airflow, and other cooling provisions. Part temperature should be verified in the final application.
• The rated current as listed is either the saturation current or the heating current, depending on which value is lower.

Storage Conditions:

• Storage time within 6 months.
• Storage temperature: 5 ~ 40C.
• Storage humidity: 10 ~ 75% RH or less.

Safety Precautions:

• Preheating is required before soldering.
• The temperature difference between preheating temperature and soldering temperature/chip temperature should be within 150C.
• Excessive heating may cause short circuits, performance degradation, or reduced lifespan.
• Avoid applying residual stress to the chip due to deformation of the printed circuit board or localized deformation at fastening points.
• Ensure sufficient margin in thermal design, as the device generates heat when powered on.
• Keep away from magnets or magnetic objects.
• Use anti-static wrist straps.

General Use Disclaimer:

This product catalog describes products intended for use in general electronic equipment (AV equipment, communication equipment, home appliances, entertainment equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under normal operating and usage conditions. For applications requiring high safety and reliability, or where failure, malfunction, or poor operation may cause damage to life, body, or property, or have significant social impact (referred to as 'Specific Applications'), the suitability, performance, and quality of this product are not guaranteed. Customers intending to use this product outside the scope, conditions, or in Specific Applications described in this catalog must consult with the relevant company department beforehand. The company will collaborate with customer needs to discuss alternative usage purposes different from those described in this product catalog.

Specific Applications Excluded:

• Aerospace equipment
• Transportation equipment (automobiles, trains, ships, etc.)
• Medical equipment
• Power generation control equipment
• Nuclear power related equipment
• Undersea equipment
• Vehicle control equipment
• Public high-level information processing equipment
• Military equipment
• Electric heating appliances, combustion equipment
• Disaster prevention and anti-theft equipment
• Various safety devices
• Other applications identified as Specific Applications

When designing equipment using products described in this catalog, ensure the inclusion of protective circuits and devices, as well as backup circuits, that comply with the intended use and operating conditions of the equipment.