<
>
Specifications
Current - Saturation (Isat):
10A
Mfr. Part #:
MS0630-2R2M
Package:
SMD,7.4x6.6mm
Key Attributes
Model Number:
MS0630-2R2M
Product Description
Product Overview
The MS0630 is a series of low-profile, high-current power inductors designed for a variety of electronic applications. These inductors are suitable for battery-powered devices, DC/DC converters in distributed power systems, and DC/DC converters for field-programmable gate arrays. They offer a combination of inductance, low DC resistance, and high current ratings, ensuring efficient power delivery and thermal management.
Product Attributes
- Brand: MOTTOTECHNOLOGY
- Series: MS0630
- Origin: SHENZHEN
- Material: Not specified
- Color: Not specified
- Certifications: Not specified
Technical Specifications
| Part Number | L0 (uH) ±20% | Rdc (mΩ) @25°C (TYP.) | Rdc (mΩ) @25°C (MAX.) | Heat Rating Current DC Amps. Irms (A) (TYP.) | Saturation Current DC Amps. Isat (A) (TYP.) |
|---|---|---|---|---|---|
| MS0630-R33M | 0.33 | 3.0 | 3.5 | 21.0 | 25.0 |
| MS0630-R47M | 0.47 | 3.5 | 4.1 | 15.5 | 20.0 |
| MS0630-R56M | 0.56 | 4.25 | 4.9 | 15.0 | 18.0 |
| MS0630-1R0M | 1.00 | 7.0 | 7.5 | 12.0 | 15.0 |
| MS0630-1R5M | 1.50 | 10.6 | 12.1 | 9.0 | 14.0 |
| MS0630-2R2M | 2.20 | 15.5 | 17.5 | 7.0 | 10.0 |
| MS0630-3R3M | 3.30 | 23.0 | 26.0 | 6.5 | 9.5 |
| MS0630-4R7M | 4.70 | 34.5 | 38.0 | 5.0 | 6.5 |
| MS0630-5R6M | 5.60 | 36.0 | 42.0 | 5.0 | 6.25 |
| MS0630-6R8M | 6.80 | 50.0 | 54.0 | 4.5 | 6.0 |
| MS0630-8R2M | 8.20 | 58.5 | 65.0 | 4.0 | 5.0 |
| MS0630-100M | 10.00 | 71.0 | 76.0 | 4.0 | 4.5 |
| MS0630-150M | 15.00 | 98.0 | 115.0 | 3.0 | 3.8 |
| MS0630-220M | 22.00 | 165.0 | 189.0 | 1.5 | 3.1 |
| MS0630-330M | 33.00 | 225.0 | 237.0 | 1.0 | 3.1 |
Notes on Specifications:
- All test data is referenced to 25°C ambient.
- Irms: DC current (A) that will cause an approximate ΔT of 40°C.
- Isat: DC current (A) that will cause L0 to drop approximately 30%.
- Operating temperature range: -55°C to +125°C.
- The part temperature (ambient + temp rise) should not exceed 125°C under worst-case operating conditions.
- The rated current as listed is either the saturation current or the heating current, depending on which value is lower.
Outline Dimensions:
Dimensions are provided in mm. Specific dimensions for each part number are not detailed in the provided text but are available upon request via procurement specifications.
Application Areas:
- Low profile, high current power supplies.
- Battery powered devices.
- DC/DC converters in distributed power systems.
- DC/DC converters for field programmable gate arrays.
General Precautions:
- Please request procurement specifications for detailed characteristics and specifications.
- Content may be subject to change without notice due to product improvements.
- Storage time within 6 months; storage conditions (temperature 5-40°C, humidity below 10-75%RH).
- Avoid use and storage in corrosive gas environments (salt, acid, alkali, etc.).
- Preheating is required before soldering.
- Temperature difference between preheating, soldering, and chip temperature should be within 150°C.
- Soldering corrections after installation must be within specified conditions.
- Overheating may cause short circuits, performance degradation, or reduced lifespan.
- Avoid applying residual stress to the chip during assembly due to PCB deformation.
- Sufficient allowance for thermal design is necessary due to self-heating during operation.
- Pay attention to coil placement in substrate design for magnetically shielded types.
- Electromagnetic interference may cause malfunction.
- Use anti-static wrist straps.
- Keep away from magnets or magnetic objects.
- Use within the range specified in procurement specifications.
- This product catalog is for general electronic equipment under normal operating conditions. For specific applications requiring high safety and reliability, or where failure could cause significant damage or social impact, consult the company.
Website: http://www.coilmx.com
Email: sales@mottotech.com
2304140030_COILMX-MS0630-2R2M_C380175.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
