Product Overview

The MS0530 series is a line of low-profile, high-current power supplies designed for various applications including battery-powered devices, DC/DC converters in distributed power systems, and DC/DC converters for field-programmable gate arrays. These components offer reliable performance in a compact form factor.

Product Attributes

• Brand: SHENZHEN MOTTOTECHNOLOGY Co.,Ltd
• Website: Http://www.coilmx.com
• Email: sales@mottotech.com

Technical Specifications

Notes:

• All test data is referenced to 25 ambient.
• Irms: DC current (A) that will cause an approximate T of 40.
• Isat: DC current (A) that will cause L0 to drop approximately 30%.
• Operating temperature range: -55 to +125.
• The part temperature (ambient + temp rise) should not exceed 125 under worst-case operating conditions. Circuit design, component, PWB trace size and thickness, airflow, and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application.
• The rated current as listed is either the saturation current or the heating current depending on which value is lower.

Storage Conditions:

• Storage time: within 6 months.
• Storage conditions: Temperature 5 ~ 40C, Humidity below 10 ~ 75%RH.

Usage Precautions:

• Preheating is required before soldering.
• The temperature difference between preheating temperature, soldering temperature, and chip temperature should be within 150C.
• Soldering correction after installation should be within the specified conditions in the procurement specification.
• Overheating may cause short circuits, performance degradation, or reduced lifespan.
• When assembling the printed circuit board with the chip into the device, be careful not to apply residual stress to the chip due to overall deformation of the printed circuit board or local deformation such as fastening parts.
• Devices generate heat (temperature rise) when powered on, so ensure sufficient margin in thermal design.
• For magnetic shielded types, pay attention to coil placement during substrate design.
• Electromagnetic interference may cause malfunction.
• Use an anti-static wrist strap as static electricity from the human body can be transferred to the ground wire.
• Do not place the product near magnets or magnetic objects.

Disclaimer:

This product catalog describes products for use in general electronic equipment (AV equipment, communication equipment, home appliances, entertainment equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) in a general standard application sense, and these general electronic equipment are to be used under normal operation and usage methods. The company does not guarantee applicability, performance, quality, etc. for the following applications (hereinafter referred to as 'Specific Applications') where high safety and reliability are required, or where equipment failure, malfunction, or poor operation may cause damage to life, body, or property, or may have a significant social impact:

• (1) Aerospace equipment
• (2) Transportation equipment (automobiles, trains, ships, etc.)
• (3) Medical equipment
• (4) Power generation control equipment
• (5) Nuclear power related equipment
• (6) Submarine equipment
• (7) Vehicle control equipment
• (8) Public high-level information processing equipment
• (9) Military equipment
• (10) Electric heating appliances, combustion equipment
• (11) Disaster prevention and anti-theft equipment
• (12) Various safety devices
• (13) Other applications identified as Specific Applications

Furthermore, when designing equipment using products described in this product catalog, ensure that protective circuits and devices are provided to match the intended use and condition of the equipment, and that backup circuits are installed.

For customers intending to use the product outside the scope, conditions, or in Specific Applications described in this product catalog, please consult with the relevant department of the company in advance. The company will negotiate with the customer to discuss usage purposes different from those described in this product catalog.

Procurement specification sheets for further confirmation of detailed characteristics and specifications are available upon request.

Content may be subject to change without prior notice due to product improvements.