Product Overview

The MS0530 series is a line of low-profile, high-current power supplies designed for various applications including battery-powered devices, DC/DC converters in distributed power systems, and DC/DC converters for field-programmable gate arrays. These inductors are engineered for demanding power applications requiring efficient current handling and compact form factors.

Product Attributes

• Brand: SHENZHEN MOTTOTECHNOLOGY Co.,Ltd
• Website: Http://www.coilmx.com
• Email: sales@mottotech.com
• Product Series: MS0530
• Material: Not specified
• Color: Not specified
• Certifications: Not specified

Technical Specifications

Outline Dimensions (mm): Not specified in detail, but implied to be low profile.

Operating Temperature Range: -55 to +125

Note on Rated Current: The rated current is the lower of saturation current or heating current.

Note on Part Temperature: The total part temperature (ambient + temp rise) should not exceed 125 under worst-case conditions. Factors influencing part temperature include circuit design, component selection, PWB trace size and thickness, airflow, and other cooling provisions. Part temperature must be verified in the end application.

Custom Part Numbers: For part numbers not listed, please contact the manufacturer.

Test Data Reference: All test data is referenced to 25 ambient.

Irms Definition: DC current (A) that will cause an approximate T of 40.

Isat Definition: DC current (A) that will cause L0 to drop approximately 30%.

Storage Conditions: Temperature 540C, Humidity 1075%RH or less, within 6 months.

Prohibited Environments: Do not use or store in corrosive gas environments (salt, acid, alkali, etc.).

Soldering Precautions: Preheating is required before soldering. Temperature difference between preheating and soldering temperature, and chip temperature, should be within 150C. Post-installation soldering corrections must be within specified conditions. Excessive heating may cause short circuits, performance degradation, or reduced lifespan.

Mechanical Stress: Avoid applying residual stress to the chip due to deformation of the printed circuit board or fastening parts during assembly.

Thermal Design: Ensure sufficient margin for thermal design as the device generates heat when energized.

Magnetic Shielding: Pay attention to coil placement during substrate design for magnetic shielded types.

Electromagnetic Interference: May cause malfunction.

Electrostatic Discharge (ESD): Use an anti-static wrist strap as static electricity from the human body can be transmitted to the ground line.

Magnetic Fields: Do not place near magnets or magnetic objects.

Usage Limits: Use within the range specified in the procurement specification sheet.

General Purpose Use: Products listed in this catalog are intended for general electronic equipment (AV equipment, communication equipment, home appliances, entertainment equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under normal operation and usage methods.

Specific Use Disclaimer: The manufacturer does not guarantee applicability, performance, quality, or reliability for 'Specific Uses' where failure, malfunction, or poor operation could lead to damage to life, body, or property, or cause significant social impact. These include, but are not limited to: (1) Aviation, aerospace equipment; (2) Transportation equipment (automobiles, trains, ships, etc.); (3) Medical equipment; (4) Power generation control equipment; (5) Nuclear power related equipment; (6) Submarine equipment; (7) Vehicle control equipment; (8) Public high-level information processing equipment; (9) Military equipment; (10) Electric heating appliances, combustion equipment; (11) Disaster prevention and anti-theft equipment; (12) Various safety devices; (13) Other uses identified as specific uses.

Consultation for Non-Standard Use: For use outside the scope, conditions, or in specific uses not listed, please consult the relevant department of the company in advance. The company will negotiate alternative usage purposes.

Protective Circuits: When designing equipment using products from this catalog, ensure protective circuits and devices are in place to match the intended use and state of the equipment, including backup circuits.