Product Overview

The MS0530 series is a line of low-profile, high-current power supplies designed for various electronic applications. These inductors are suitable for battery-powered devices, DC/DC converters in distributed power systems, and DC/DC converters for field-programmable gate arrays (FPGAs). They offer a wide operating temperature range from -55 to +125.

Product Attributes

• Brand: SHENZHEN MOTTOTECHNOLOGY Co.,Ltd
• Website: http://www.coilmx.com
• Email: sales@mottotech.com

Technical Specifications

Product Identification: MS 0530 1R0 M

Notes:

• All test data is referenced to 25 ambient.
• Irms: DC current (A) that will cause an approximate ΔT of 40.
• Isat: DC current (A) that will cause L0 to drop approximately 30%.
• Operating temperature range: -55 to +125.
• The part temperature (ambient + temp rise) should not exceed 125 under worst-case operating conditions. Circuit design, component, PWB trace size and thickness, airflow, and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application.
• The rated current as listed is either the saturation current or the heating current depending on which value is lower.
• Storage time is within 6 months, storage conditions (temperature 5 ~ 40°C, humidity below 10 ~ 75%RH).
• Soldering correction after mounting should be within the conditions specified in the procurement specification.
• Excessive heating may cause short circuits, performance degradation, or reduced lifespan.
• When assembling the printed circuit board with the chip into the device, be careful not to apply residual stress to the chip due to overall deformation of the printed circuit board or local deformation such as fastening parts.
• The device generates heat (temperature rise) when energized, so sufficient margin should be provided in the thermal design.
• For magnetic shielded types, pay attention to coil placement during substrate design.
• Electromagnetic interference may cause malfunction.
• Use an anti-static wrist strap as static electricity from the human body can be transmitted to the ground wire.
• Do not place this product near magnets or magnetic objects.
• Use within the range specified in the procurement specification.

Disclaimer: This product catalog describes products intended for use in general electronic equipment (AV equipment, communication equipment, home appliances, entertainment equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) in a general standard application sense, and these general electronic equipment should be used under normal operating and usage methods. The company does not guarantee applicability, performance, quality, etc. for the following applications (hereinafter referred to as 'Specific Applications') where high safety and reliability are required, or where equipment failure, malfunction, or operational failure may cause damage to life, body, or property, or may have a significant social impact: (1) Aerospace equipment, (2) Transportation equipment (automobiles, trains, ships, etc.), (3) Medical equipment, (4) Power generation control equipment, (5) Nuclear power related equipment, (6) Submarine equipment, (7) Vehicle control equipment, (8) Public high-level information processing equipment, (9) Military equipment, (10) Electric heating appliances, combustion equipment, (11) Disaster prevention and anti-theft equipment, (12) Various safety devices, (13) Other applications identified as Specific Applications. If the customer plans to use the product outside the scope and conditions of this product catalog, or in Specific Applications, please consult with the relevant department of the company in advance. The company will negotiate usage purposes different from those described in this product catalog in accordance with customer requirements. When designing equipment using products described in this product catalog, ensure that protective circuits and devices are in place to match the intended use and state of the equipment, and install backup circuits, etc.

If you require another part number, please contact us.