Product Overview

The MS0530 is a series of low-profile, high-current power supply inductors designed for various electronic applications. These inductors are suitable for battery-powered devices, DC/DC converters in distributed power systems, and DC/DC converters for field-programmable gate arrays (FPGAs). They offer reliable performance with specific current ratings and temperature considerations for demanding environments.

Product Attributes

• Brand: SHENZHEN MOTTOTECHNOLOGY Co.,Ltd
• Product Series: MS0530
• Material: Not specified in detail, but related to magnetic shielding.
• Origin: Not explicitly stated, but company is based in Shenzhen.
• Certifications: Not specified.

Technical Specifications

Outline Dimensions (mm): Not specified in the provided text.

Operating Temperature Range: -55 to +125

Note on Rated Current: The rated current is the lower of either the saturation current or the heating current.

Note on Part Temperature: The part temperature (ambient + temp rise) should not exceed 125 under worst-case operating conditions. Factors influencing part temperature include circuit design, component, PWB trace size and thickness, airflow, and other cooling provisions. Part temperature should be verified in the end application.

Custom Part Numbers: For part numbers not listed, please contact the manufacturer.

Storage Conditions: Within 6 months, temperature 5-40C, humidity below 10-75%RH.

Note on Solderability: Terminal electrode solderability may degrade if storage time exceeds the recommended period.

Environmental Considerations: Do not use or store in corrosive gas environments (salt, acid, alkali, etc.).

Soldering Precautions: Preheating is required before soldering. The temperature difference between preheating, soldering, and chip temperature should be within 150C. Post-installation soldering corrections must be within specified conditions.

Overheating: Excessive heating may lead to short circuits, performance degradation, or reduced lifespan.

Mechanical Stress: Avoid applying residual stress to the chip due to printed circuit board deformation or fastening points.

Thermal Design: Ensure sufficient margin in thermal design, as the device generates heat during operation.

Magnetic Shielding: For magnetic shielded types, pay attention to coil placement during PCB design.

Electromagnetic Interference: May cause malfunction.

Electrostatic Discharge (ESD): Use an anti-static wrist strap, as static electricity from the human body can transfer to the ground line.

Magnetic Fields: Do not place near magnets or magnetic objects.

Usage Limitations: Use within the specified range of the procurement specification book.

General Purpose Use: Products listed are intended for general electronic equipment (AV, communication, home appliances, entertainment, computer, personal, office, measurement, industrial robots) under normal operation and usage methods.

Specific Use Disclaimer: The manufacturer does not guarantee suitability, performance, or quality for 'Specific Uses' where failure, malfunction, or poor operation could lead to damage to life, body, property, or have significant social impact. These include, but are not limited to: aviation, aerospace, transportation (automotive, rail, marine), medical, power generation control, nuclear power, subsea, traffic control, public high-information processing, military, electric heating/combustion, disaster prevention/anti-theft, safety devices, and other designated specific uses. Consult the manufacturer for use outside catalog ranges, conditions, or for specific uses.

Protective Circuits: When designing equipment using these products, ensure protective and backup circuits are implemented according to the equipment's intended use and conditions.

Manufacturer Contact:

• Website: Http://www.coilmx.com
• Email: sales@mottotech.com