Product Overview
The MS0420 is a series of low-profile, high-current power inductors designed for various electronic applications. These inductors are suitable for battery-powered devices, DC/DC converters in distributed power systems, and DC/DC converters for field-programmable gate arrays. They offer reliable performance with a wide operating temperature range of -55C to +125C.
Product Attributes
- Brand: MOTTOTECHNOLOGY
- Series: MS0420
- Origin: Shenzhen, China
- Material: Not specified, but refers to magnetic shielding type.
- Certifications: Not specified.
Technical Specifications
Product Identification: MS 0420 - 1R0 M - -
| Part Number | L0(uH) 20% | Rdc (m) @25C (TYP.) | Rdc (m) @25C (MAX.) | Heat Rating Current DC Amps. Irms (A) | Saturation Current DC Amps. Isat (A) (TYP.) |
|---|---|---|---|---|---|
| MS0420-R47M | 0.47 | 12.5 | 14.0 | 7.0 | 9.5 |
| MS0420-R56M | 0.56 | 14.0 | 16.0 | 6.0 | 8.5 |
| MS0420-1R0M | 1.00 | 24.0 | 27.0 | 4.5 | 7.0 |
| MS0420-1R5M | 1.50 | 35.0 | 42.0 | 4.0 | 6.0 |
| MS0420-2R2M | 2.20 | 52.0 | 58.0 | 3.0 | 5.0 |
| MS0420-3R3M | 3.30 | 74.0 | 87.0 | 2.5 | 4.0 |
| MS0420-4R7M | 4.70 | 92.0 | 104.0 | 2.2 | 3.0 |
| MS0420-6R8M | 6.80 | 160.0 | 178.0 | 2.0 | 2.5 |
| MS0420-100M | 10.00 | 230.0 | 265.0 | 1.6 | 2.2 |
Notes:
- All test data is referenced to 25C ambient.
- Irms: DC current (A) that will cause an approximate T of 40C.
- Isat: DC current (A) that will cause L0 to drop approximately 30%.
- Operating temperature range: -55C to +125C.
- The part temperature (ambient + temp rise) should not exceed 125C under worst-case operating conditions. Circuit design, component, PWB trace size and thickness, airflow, and other cooling provisions all affect part temperature. Part temperature should be verified in the end application.
- The rated current as listed is either the saturation current or the heating current, depending on which value is lower.
Outline Dimensions (mm): Not specified in detail, but indicated as a specification category.
Product Characteristic Curves: L and I curve, T and I curve, Reflow curve are available.
Storage Conditions: Temperature 5 ~ 40C, Humidity 10 ~ 75%RH or less, within 6 months.
Usage Precautions: Avoid gas corrosive environments (salt, acid, alkali, etc.). Preheating is required before soldering. Temperature difference between preheating and soldering temperature should be within 150C. Avoid excessive heating. Prevent residual stress on the chip from PWB deformation. Ensure sufficient margin for thermal design. Magnetic shielded types require attention to coil placement in substrate design. Avoid electromagnetic interference. Use anti-static wrist straps. Do not place near magnets or magnetic objects. Use within specified ranges.
Disclaimer: This product catalog is for general electronic equipment use. For applications requiring high safety and reliability, or where failure may cause significant damage or social impact (Specific Applications), MOTTOTECHNOLOGY does not guarantee applicability, performance, or quality. Consultation is required for use outside catalog specifications or for Specific Applications.
Manufacturer: SHENZHEN MOTTOTECHNOLOGY Co.,Ltd
Website: Http://www.coilmx.com
Email: sales@mottotech.com
2304140030_COILMX-MS0420-3R3M_C380155.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
