Product Overview

The FXCMXXXXF-Series and FXCMXXXXCF-Series are wire wound chip common mode chokes designed for general electronics equipment. These common mode line filters effectively suppress noise, ensuring reliable performance in various applications. They are developed and designed by SZ CJIANG TECHNOLOGY CO., LTD.

Product Attributes

• Brand: CJIANG
• Origin: Shenzhen, China
• Product Type: Wire Wound Chip Common Mode Choke
• Series: FXCMXXXXF-Series, FXCMXXXXCF-Series

Technical Specifications

Product Identification Example: FXCM 4520 F - 900 T
(1) Series, (2) Dimensions (L*H*W), (3) Type, (4) Impedance (e.g., 900=90, 901=900, 902=9000), (5) Packing: REEL

Dimensions and Recommended Patterns

Electrical Characteristics (General)

• Rated Current: Temp. rise 40C TYP
• Operating Temperature: -40C up to +125C

FXCM4520F Series Electrical Characteristics

FXCM7060F Series Electrical Characteristics

FXCM9070F Series Electrical Characteristics

FXCM1211F Series Electrical Characteristics

FXCM1513CF Series Electrical Characteristics

Reliability Testing

• Operating Temperature: -40 to +125 C
• Appearance Inspection: No external defects by visual inspection.
• Terminal Strength: After soldering, between copper plate and terminals of coils, push in two directions of X, Y with standing 10N (1.02kg) for 10+/-2 sec. Terminal should not peel off.
• Heat endurance of reflow soldering: Test under IR Reflow profile.
• Insulating resistance: Over 100 M at 100V D.C. between wire and core.
• Dielectric Strength: Apply at 0.5KV 3mA for 1 minute between wire and core.
• Temperature characteristics: Inductance coefficient (0~2,000) 10 / (-40~ +125 ).
• Humidity characteristics: Inductance deviation within 10%, after 96 hours in 90~95% relative humidity at 40 2 and 1 hours drying under normal condition. A test is made under the above mentioned condition, and it is kept for 2 hours in the normal condition. After that, no mechanical and electrical defect should be found.

Material List

Packing Specifications

Disclaimer

All products listed in this specification are developed, designed, and intended for use in general electronics equipment. They are not designed or warranted to meet the requirements of applications demanding especially high reliability, or where failure, malfunction, or trouble might directly cause damage to society, persons, or property. SZ CJIANG TECHNOLOGY CO., LTD. is not responsible for any damage or liability caused by the use of these products in such applications. Please contact us for more details if you intend to use our products in the following applications: Aircraft equipment, Aerospace equipment, Undersea equipment, Nuclear control equipment, Military equipment, Power plant equipment, Medical equipment, Transportation equipment (automobiles, trains, ships, etc.), Traffic signal equipment, Disaster prevention / crime prevention equipment, Data-processing equipment, and applications of similar complexity or with comparable reliability requirements.