Product Overview

The CJIANG FXCM XXXXF-Series and FXCM XXXXCF-Series are wire wound chip common mode chokes designed for general electronics equipment. These components serve as common mode line filters, effectively suppressing electromagnetic interference (EMI) in electronic circuits. They are developed and intended for use in general electronic applications, offering reliable performance within a specified operating temperature range.

Product Attributes

• Brand: CJIANG
• Manufacturer: (SZ CJIANG TECHNOLOGY CO., LTD)
• Product Type: Wire Wound Chip Common Mode Choke
• Series: FXCM XXXXF-Series, FXCM XXXXCF-Series

Technical Specifications

General Electrical Characteristics:

• Rated Current: Temperature rise 40C TYP
• Operating Temperature: -40C up to +125C

Dimensions:

FXCM4520F Series:

FXCM7060F Series:

FXCM9070F Series:

FXCM1211F Series:

FXCM1513CF Series:

Reliability Testing:

• Heat endurance of reflow soldering: Inductance coefficient (0~2,000) 10 / ( - 40~ + 125 )
• Insulating resistance: Over 100 M at 100V D.C. between wire and core
• Dielectric Strength: Apply at 0.5KV 3mA for 1 minute between wire and core
• Temperature characteristics: Inductance deviation within 10%, after 96 hours in 90~95% relative humidity at 40 2 and 1 hours drying under normal condition
• Humidity characteristics: A test is made under the above mentioned condition, and it is kept for 2 hours in the normal IR Reflow profile. After that, no mechanical and electrical defect should be found.
• Appearance Inspection: No external defects by visual inspection.
• Terminal Strength: After soldering, between copper plate and terminals of coils, push in two directions of X, Y with standing 10N(1.02kg) for 10+/-2 sec. Terminal should not peel off.

Material List:

Packing Specifications:

• Tape width: 24 mm
• Distance: 16 mm
• Pull-of force: 10~120g
• Reel Diameter: 13' (330mm) for most series, 178mm for FXCM4520F series.
• Packaging includes PE bag, inner box, and outer box.

Packing Coefficients:

Note: The products are intended for use in general electronics equipment and are not designed or warranted for applications requiring especially high reliability, or where failure might directly cause damage to society, person, or property. Contact CJIANG for details if intended for applications such as aircraft, aerospace, medical, or automotive equipment.