<
>
Specifications
Lifetime:
2000hrs@105℃
Operating Temperature:
-40℃~+105℃
Capacitance:
82uF
Height - Seated (Max):
26mm
Pin Spacing:
7.5mm
Voltage Rating:
400V
Diameter:
16mm
Tolerance:
±20%
Mfr. Part #:
CD110K2GM820L260T
Package:
Through Hole,D16xL26mm
Key Attributes
Model Number:
CD110K2GM820L260T
Product Description
Product Overview
The CH CD110K series aluminum electrolytic capacitor is designed for reliable performance in demanding applications. Featuring a robust construction and a wide operating temperature range of -40C to +105C, these capacitors offer stable electrical characteristics. They are suitable for various industrial and electronic applications requiring dependable filtering, smoothing, and energy storage.
Product Attributes
- Brand: CH
- Supplier: Dongguan Chuanghui Electronics Co., Ltd.
- Origin: Dongguan, China
- Material: Aluminum Electrolytic Capacitor
- Certifications: RoHS
Technical Specifications
| Item | Specification | Test Method / Condition |
|---|---|---|
| Model Series | CD110K | - |
| Customer Part Number | CD110K2GM820L260T | - |
| Rated Working Voltage | 400V | - |
| Surge Voltage | 450V | - |
| Nominal Capacitance | 82F | - |
| Capacitance Tolerance | 20% | 120Hz 20%, 0.5Vrms, 1.5 2.0VDC |
| Maximum Dissipation Factor (tan) | 0.20 | 120Hz 20 |
| Maximum Leakage Current | 671A | 2min. 20 |
| Maximum Ripple Current | 403 mArms | 120Hz 105 |
| Impedance (ESR) | - | 100KHz 20 |
| Dimensions (D x L) | 16 x 26.0 mm | - |
| Lead Diameter (d) | 0.8 0.05 mm | - |
| Lead Pitch (P) | 7.5 0.5 mm | - |
| Operating Temperature Range | -40 to +105 | - |
| Leakage Current (Test) | 671A | Protection Resistor: 100010, Applied Voltage: Rated Working Voltage, Test Time: 2 minutes charge |
| Dissipation Factor (Test) | 0.20 and below | Same as capacitance test conditions |
| High Temperature Load Life | Leakage Current Table 1 specified value, Capacitance Change within 20% of initial value, Dissipation Factor 200% of Table 1 specified value, Appearance: No obvious abnormality | 2000 Hours at rated conditions |
| High Temperature Storage | Leakage Current 200% of Table 1 specified value, Capacitance Change within 20% of initial value, Dissipation Factor 200% of Table 1 specified value, Appearance: No obvious abnormality | 1052, No voltage applied, 1000 hours |
| Lead Tensile & Bending Strength | - | Tensile: 1-5 sec, Bending: 305 sec |
| Impedance Ratio (Z(-25)/Z(+20)) | < 6 | - |
| Impedance Ratio (Z(-40)/Z(+20)) | - | - |
| Temperature Characteristics (Impedance Ratio) | < Values in Table 6-7 | Test temperatures: -25, -40 |
| Temperature Characteristics (Capacitance Change) | Within 25% of initial value | Test temperatures: -25, -40 |
| Surge Voltage Test | Leakage Current Initial specified value, Capacitance Change within 15% of initial value, Dissipation Factor Initial specified value, Appearance: No obvious abnormality | 15-35, Charge 305 sec, Frequency 60.5 Hz, Discharge 5 min 30 sec, Cycle 1000 times |
| Vibration Resistance | Capacitance stable, Capacitance Change within 5% of initial value, Appearance: No obvious abnormality | 10-55Hz, Amplitude 1.5mm, 2 hours in X, Y, Z directions |
| Solderability | - | Tin-plated area > 3/4, Solder: Sn-Ag, Sn-Cu Type, Temperature: 2405, Immersion depth: 2-2.5mm |
| Resistance to Soldering Heat | Leakage Current Initial specified value, Capacitance Change within 15% of initial value, Dissipation Factor Initial specified value, Appearance: No obvious abnormality | Temperature: 2805, Time: 101 sec |
| High Temperature High Humidity Test | Leakage Current Initial specified value, Capacitance Change within 15% of initial value, Dissipation Factor Initial specified value, Appearance: No obvious abnormality | 402, 90-95% Humidity, 500 8 hours |
| Anti-explosion Performance | No burning or violent explosion after safety vent opens | DC method: Set 1A current, reverse voltage applied until safety vent opens |
| Soldering Iron Temperature | 270350 | Within 3 seconds |
| Reflow Soldering Temperature | 2605 | Preheat: 1205, Immersion time: 2-4 sec |
| PCB Cleaning Solvent Recommendation | Methanol, Ethanol, Petroleum Ether, Isopropanol, General cleaning agents | Avoid halide or similar solvents. Ultrasonic cleaning time < 5 min, Cleaner temperature < 60. Hot air for drying < max operating temperature. |
2508281825_ChuangHui-CD110K2GM820L260T_C51026618.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
