Product Overview

The FXCMXXXXF-Series and FXCMXXXXCF-Series are wire wound chip common mode chokes designed for general electronics equipment. These filters are engineered to suppress common mode noise, contributing to improved signal integrity and system reliability. They are developed and manufactured by SZ CJIANG TECHNOLOGY CO., LTD.

Product Attributes

• Brand: CJIANG
• Manufacturer: SZ CJIANG TECHNOLOGY CO., LTD
• Product Type: Wire Wound Chip Common Mode Choke
• Series: FXCMXXXXF-Series, FXCMXXXXCF-Series
• Origin: Shenzhen, China

Technical Specifications

General Electrical Characteristics:

• Rated Current: Temperature rise 40C TYP
• Operating Temperature: -40C up to +125C

Dimensions (mm):

FXCM4520F Series Specifications:

FXCM7060F Series Specifications:

FXCM9070F Series Specifications:

FXCM1211F Series Specifications:

FXCM1513CF Series Specifications:

Reliability Testing:

• Operating Temperature: -40 to +125 C
• Appearance Inspection: No external defects by visual inspection.
• Terminal Strength: After soldering, between copper plate and terminals of coils, push in two directions of X, Y with standing 10N(1.02kg) for 10+/-2 sec. Terminal should not peel off.
• Heat endurance of reflow soldering: Inductance deviation within 10%, after 96 hours in 90~95% relative humidity at 40 2 C and 1 hours drying under normal condition.
• Insulating resistance: Over 100 M at 100V D.C. between wire and core.
• Dielectric Strength: Apply at 0.5KV 3mA for 1 minute between wire and core.
• Temperature characteristics: Inductance coefficient (0~2,000) 10/ (-40~ +125 ).
• Humidity characteristics: A test is made under the above mentioned condition, and it is kept for 2 hours in the normal condition. After that, no mechanical and electrical defect should be found.

Material List:

Packing Specifications:

Note: 4520F series reel diameter is 178mm, other series are 330mm.

Disclaimer: All products listed in this specification are developed, designed, and intended for use in general electronics equipment. They are not designed or warranted to meet the requirements of applications requiring especially high reliability, or where failure, malfunction, or trouble might directly cause damage to society, person, or property. SZ CJIANG TECHNOLOGY CO., LTD is not responsible for any damage or liability caused by the use of the products in such applications. Please contact us for more details if you intend to use our products in the following applications: Aircraft, Aerospace, Undersea, Nuclear control, Military, Power plant, Medical, Transportation (automobiles, trains, ships, etc.), Traffic signal, Disaster prevention/crime prevention, Data-processing, and applications of similar complexity or with comparable reliability requirements.