<
>
Specifications
Mfr. Part #:
CD11A2GM100F100T
Package:
Through Hole,D8xL10mm
Key Attributes
Model Number:
CD11A2GM100F100T
Product Description
Product Overview
The CH CD11A Series Aluminum Electrolytic Capacitor is designed for reliable performance in various electronic applications. With a capacitance of 10F and a rated working voltage of 400V, this capacitor offers a wide operating temperature range of -40C to +105C. It features a compact D8x10L size, making it suitable for space-constrained designs. The capacitor meets RoHS standards and comes with a material approval document, indicating its suitability for use in new models and compliance with quality requirements.
Product Attributes
- Brand: CH
- Product Type: Aluminum Electrolytic Capacitor
- Series: CD11A
- Origin: Dongguan City Chuanghui Electronics Co., Ltd.
- Certifications/Compliance: RoHS
- Material: PET (Sleeve)
Technical Specifications
| Specification | Value |
|---|---|
| Model Number | CD11A2GM100F100T |
| Capacitance | 10F |
| Rated Working Voltage | 400V |
| Surge Voltage | 450V |
| Capacitance Tolerance | 20% |
| Maximum Dissipation Factor (120Hz, 20C) | 0.20 |
| Maximum Leakage Current (2 min, 20C) | 95A |
| Maximum Allowable Ripple Current (120Hz, 105C) | 95mArms |
| Impedance (ESR) (120Hz, 20C) | / |
| Operating Temperature Range | -40C to +105C |
| Dimensions (DxL) | D8x10L mm |
| Diameter (D) Tolerance | 0.5 mm |
| Length (L) Tolerance | 1.0 mm |
| Pitch (P) Tolerance | 0.5 mm |
| Lead Diameter (d) Tolerance | 0.05 mm |
| High Temperature Load Life | 2000 Hours |
| High Temperature Storage | 1000 Hours |
| Solderability | Wetted area > 3/4 |
| Resistance to Soldering Heat | 101 sec. at 2805C |
| High Temperature High Humidity Test | 500 8 hours at 402C, 90-95% RH |
| Explosion-proof Performance | No burning or violent explosion after vent opens |
| Packaging Quantity per Box | 480 PCS |
| Box Dimensions (LxWxH) | 320x320x480 mm |
| Frequency (Hz) | Frequency Coefficient |
|---|---|
| 120Hz | 1.0 |
| 400Hz | 1.3 |
| 50(60)Hz | 0.8 |
| 1KHz | 1.45 |
| 10KHz | 1.65 |
| 50K100KHz | 1.7 |
| Test Item | Standard | Test Method |
|---|---|---|
| Leakage Current | 95 A | Protection resistor: 100010 Applied voltage: Rated working voltage Test time: After charging for 2 minutes |
| Capacitance Range | 20% | Test frequency: 120Hz20% Test voltage: 0.5Vrms, 1.5 2.0VDC |
| Dissipation Factor | 0.20 and below | Same as capacitance test conditions |
| High Temperature Load Life | Leakage Current Table 1 value, Capacitance Change within 20% of initial value, Dissipation Factor 200% of Table 1 value, Appearance no obvious abnormality | Test temperature: 1052 Applied voltage: Rated working voltage Test time: 2000H |
| High Temperature Storage | Leakage Current 200% of Table 1 value, Capacitance Change within 20% of initial value, Dissipation Factor 200% of Table 1 value, Appearance no obvious abnormality | Test temperature: 1052 No voltage applied Test time: 1000 hours +24, -0 hours |
| Lead Tensile and Bending Strength | Tensile Strength: 5N (0.51KG) for wire diameter 0.5mm; 10N (1.02KG) for 0.60.8mm. Bending Strength: 2.5N(0.25KG) for wire diameter 0.5mm; 5N(0.51KG) for 0.60.8mm. | Holding time: Linear tensile: 15 sec. Bending tensile: 305 sec. |
| Impedance Ratio | Z(-25)/Z(+20) < 6; Z(-40)/Z(+20) < - | N/A |
| Temperature Characteristics | Impedance Ratio < specified values in Table 6-7; Capacitance Change within 25% of initial value | Test temperature stages: 202, -253, -403, 202, 1052, 202. Capacitance measured after temperature stabilization. |
| Surge Voltage | Leakage Current Initial specified value, Capacitance Change within 20% of initial value, Dissipation Factor 200% of Table 1 value, Appearance no obvious abnormality | Test temperature: 1535 Test voltage: Surge voltage specified on page 2. Charging 305 seconds, frequency 60.5 seconds, discharging 5 minutes 30 seconds, cycle 1000 times. |
| Vibration Resistance Test | Capacitance parameters stable, Capacitance Change within 5% of initial value, Appearance no obvious abnormality | Frequency: 1055Hz Amplitude: 1.5mm Direction and duration: 2 hours each on X, Y, Z axes. |
| Solderability | Wetted area > 3/4 | Solder: Sn-Ag, Sn-Cu Type Soldering temperature: 2405 Immersion depth: 22.5mm Flux: Ethanol solution, Isopropanol solution, or Rosin solution |
| Resistance to Soldering Heat | Leakage Current 200% of Table 1 value, Capacitance Change within 20% of initial value, Dissipation Factor 200% of Table 1 value, Appearance no obvious abnormality | Soldering temperature: 2805 Soldering time: 101sec. |
| High Temperature High Humidity Test | Leakage Current Initial specified value, Capacitance Change within 15% of initial value, Dissipation Factor Initial specified value, Appearance no obvious abnormality | Test temperature: 402 Humidity: 9095% Test time: 500 8 hours. Measurement after recovery to normal temperature. |
| Explosion-proof Performance | No burning or violent explosion after vent opens. | DC method: Set current to 1A, reverse voltage applied until vent opens. |
| Capacitance | System Power |
|---|---|
| 1F | 2W |
| 2.2F | 4W |
| 3.3F | 6W |
| 4.7F | 10W |
| Soldering Method | Temperature | Time |
|---|---|---|
| Soldering Iron | 270350 | Within 3 seconds |
| Reflow Soldering (Preheat) | PCB surface temperature 1205 | N/A |
| Reflow Soldering (Soldering) | 2605 | 24 sec. |
2511271355_ChuangHui-CD11A2GM100F100T_C52994857.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
