<
>
Specifications
Mfr. Part #:
CD110K2GM4R7F110T
Package:
Through Hole,D8xL11mm
Key Attributes
Model Number:
CD110K2GM4R7F110T
Product Description
Product Overview
The CH CD110K Series Aluminum Electrolytic Capacitor is designed for applications requiring stable performance across a wide temperature range. With a robust construction and reliable electrical characteristics, this capacitor is suitable for various industrial and electronic applications. It features a working temperature range of -40C to +105C, a rated working voltage of 400V, and a capacitance of 4.7F. The capacitor is manufactured by Dongguan Chuanghui Electronics Co., Ltd.
Product Attributes
- Brand: CH
- Manufacturer: Dongguan Chuanghui Electronics Co., Ltd.
- Series: CD110K
- Material: PET (Sleeve)
- Certifications: RoHS
Technical Specifications
| Specification | Value |
|---|---|
| Product Code | CD110K2GM4R7F110T |
| Capacitance | 4.7F |
| Capacitance Tolerance | 20% |
| Rated Working Voltage | 400V |
| Surge Voltage | 450V |
| Maximum Dissipation Factor (120Hz, 20) | 0.20 |
| Maximum Leakage Current (2 min, 20) | 52.6A |
| Maximum Allowable Ripple Current (120Hz, 105) | 52 mArms |
| Impedance (ESR) (100KHz, 20) | N/A (Refer to Table 1 for detailed values) |
| Dimensions (D x L) | 8mm x 11mm |
| Lead Diameter (d) | 0.5 0.05 mm |
| Lead Pitch (P) | 3.5 0.5 mm |
| Working Temperature Range | -40 to +105 |
| Marking | Black background with white lettering (e.g., 4.7F 400V, CH logo, temperature range, VENT) |
| Sleeve Material | PET |
| High Temperature Load Life | 2000 Hours |
| High Temperature Storage | 1000 Hours |
| Solderability | Tin-plated copper wire |
| Soldering Iron Temperature | 270350 (within 3 seconds) |
| Reflow Soldering Temperature | 2605 (24 seconds immersion) |
| Cleaning Solvent Recommendation | Methanol, Ethanol, Petroleum Ether, Isopropanol, general cleaning agents (avoid halogenated solvents) |
| Packaging Box Dimensions (L x W x H) | 480mm x 320mm x 320mm |
| Standard Reference | JIS C 5141 |
| Test Item | Standard | Test Method |
|---|---|---|
| Leakage Current | I52.6A | Protection Resistor: 100010, Applied Voltage: Rated Working Voltage, Test Time: 2 minutes charge |
| Capacitance Range | 20% | Test Frequency: 120Hz20%, Test Voltage: 0.5Vrms, 1.52.0VDC |
| Dissipation Factor | 0.20 and below | Same as capacitance test conditions |
| High Temperature Load Life | Leakage Current Table 1 specified value, Capacitance Change within 20% of initial value, Dissipation 200% of Table 1 specified value, Appearance: No obvious abnormality | 2000 H |
| High Temperature Storage | Leakage Current 200% of Table 1 specified value, Capacitance Change within 20% of initial value, Dissipation 200% of Table 1 specified value, Appearance: No obvious abnormality | Test Temperature: 1052, No voltage applied, Test Time: 1000 hours |
| Lead Tensile and Bending Strength | N/A | Tensile: 15 sec, Bending: 305 sec |
| Impedance Ratio | Z(-25/Z(+20< 6, Z(-40/Z(+20< 6 | N/A |
| Temperature Characteristics | Capacitance Change within 25% of initial value (Stages 2, 3), Impedance Ratio < specified values in Table 6-7 (Stages 2, 3) | Stage 1: 202, Stage 2: -253, Stage 3: -403, Stage 4: 202, Stage 5: 1052, Stage 6: 202 |
| Surge Voltage | Leakage Current Initial specified value, Capacitance Change within 15% of initial value, Dissipation Initial specified value, Appearance: No obvious abnormality | Test Temperature: 1535, Test Voltage: See page 2, Charge 305 sec, Frequency 60.5 sec, Discharge 5 min 30 sec, Cycle 1000 times |
| Anti-vibration Test | Capacitance stable, Capacitance Change within 5% of initial value, Appearance: No obvious abnormality | Frequency: 1055Hz, Amplitude: 1.5mm, Direction and Duration: X,Y, Z axes each for 2 hours |
| Weldability | Lead tinning area > 3/4 | Solder: Sn-Ag, Sn-Cu Type, Welding Temperature: 2405, Immersion Depth: 22.5mm, Flux: Ethanol solution, Isopropanol solution or Rosin solution |
| Resistance to Soldering Heat | Leakage Current Initial specified value, Capacitance Change within 15% of initial value, Dissipation Initial specified value, Appearance: No obvious abnormality | Soldering Temperature: 2805, Soldering Time: 101 sec |
| High Temperature and High Humidity Test | Leakage Current Initial specified value, Capacitance Change within 15% of initial value, Dissipation Initial specified value, Appearance: No obvious abnormality | Test Temperature: 402, Humidity: 9095%, Test Time: 500 8 hours |
| Explosion-proof Performance | No burning or violent explosion after explosion vent opens | DC Method: Set 1A current, reverse boost until explosion vent opens |
2511271355_ChuangHui-CD110K2GM4R7F110T_C52994862.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
