<
>
Specifications
Current Rating:
800mA
Inductance:
4.7uH
Tolerance:
±20%
Frequency - Self Resonant:
-
Current - Saturation (Isat):
-
DC Resistance(DCR):
250mΩ
Type:
Multilayer Inductor
Ratings:
-
Q @ Frequency:
-
Mfr. Part #:
CPY160808T-4R7M-NP
Package:
0603
Key Attributes
Model Number:
CPY160808T-4R7M-NP
Product Description
Product Overview
This specification applies to Chilisin CPY160808T Series Multilayer Ferrite chip inductors. These components are designed for various electronic applications and comply with RoHS, Halogen Free, and REACH standards.
Product Attributes
- Brand: Chilisin
- Origin: Dongguan, China (Manufacturing facilities also in Suzhou, China; Henan, China; and Hsinchu, Taiwan)
- Certifications: RoHS & Halogen Free & REACH Compliance
Technical Specifications
| Part Number | Inductance (uH) | Test Freq. | RDC ()Max. | Rated Current (mA)Max. | Tolerance (%) | Operating Temperature | Storage Temperature |
| CPY160808T-1R0-NP | 1 | 1 MHz, 200 mV | 0.12 | 1500 | 20, 30 | -40105(Including self - temperature rise) | -4085(after PCB) |
| CPY160808T-2R2-NP | 2.2 | 1 MHz, 200 mV | 0.2 | 1000 | 20, 30 | -40105(Including self - temperature rise) | -4085(after PCB) |
| CPY160808T-4R7-NP | 4.7 | 1 MHz, 200 mV | 0.25 | 800 | 20, 30 | -40105(Including self - temperature rise) | -4085(after PCB) |
| CPY160808T-100-NP | 10 | 1 MHz, 200 mV | 0.9 | 90 | 20, 30 | -40105(Including self - temperature rise) | -4085(after PCB) |
Notes:
- -tolerance M=20% / T=30%
- 1. Operating temperature range 40105(Including self - temperature rise)
- 2. Rated Current: Applied the current to coils, the temperature rise shall not be more than 30
- "-N" FOR COMPLETELY LEAD FREE TYPE(INCLUDING FERRITE BODY & SOLDER)
Reliability of Ferrite Multilayer Chip Inductor
Mechanical Performance
| No. | Item | Specification |
| 1-1-1 | Flexure Strength | Substrate Dimension: 100x40x1.6mm (For 100505, 100x40x0.8mm) Deflection: 2.0mm Keeping Time: 30sec. Forces applied on the right test device shall be soldered on the substrate conditions must not damage the terminal electrode and the ferrite. |
| 1-1-2 | Vibration Test | Substrate: Test device shall be soldered on the substrate. Oscillation Frequency: 10 to 55 to 10Hz for 1min. Amplitude: 1.5mm. Time: 2hrs for each axis (X, Y & Z), total 6hrs. |
| 1-1-3 | Resistance to Soldering Heat | Pre-heating: 150, 1min. Solder Composition: Sn/Ag3.0/Cu0.5(Pb-Free). Solder Temperature: 2605. Immersion Time: 101sec. Appearance: No damage. More than 75% of the terminal electrode should be covered with solder. Inductance: within 20% of initial value. |
| 1-1-4 | Solder ability | Pre-heating: 150, 1min. Solder Composition: Sn/Ag3.0/Cu0.5(Pb-Free). Solder Temperature: 2455(Pb-Free). Immersion Time: 41sec. The electrodes shall be at least 95% covered with new solder coating. |
Environmental Performance
| No. | Item | Specification |
| 1-2-1 | Temperature Cycle | One cycle: Step Temp () Time (min). 1: -403 (30), 2: 252 (3), 3: 1053 (30), 4: 252 (3). Total: 100cycles. Measured after exposure in the room condition for 24hrs. Appearance: No damage. Inductance: within 20% of initial value. |
| 1-2-2 | Humidity Resistance | Temperature: 402. Relative Humidity: 90 ~ 95%. Time: 1000hrs. Measured after exposure in the room condition for 24hrs. |
| 1-2-3 | High Temperature Resistance | Temperature: 853. Relative Humidity: 20%. Applied Current: Rated Current. Time: 1000hrs. Measured after exposure in the room condition for 24hrs. |
| 1-2-4 | Low Temperature Resistance | Temperature: -403. Relative Humidity: 0%. Time: 1000hrs. Measured after exposure in the room condition for 24hrs. |
Packaging
Packaging - Cover Tape
The force for tearing off cover tape is 10 to 100 grams in the arrow direction.
Packaging Quantity
Refer to Tape Dimensions.
Reel Dimensions
Refer to Tape Dimensions.
Tape Dimensions
Refer to the provided diagram (not included in text).
Recommended Land Pattern
Refer to the provided diagram (not included in text).
General Notes
- Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product.
- Do not knock nor drop.
- All the items and parameters in this product specification have been prescribed on the premise that our product is used for the purpose, under the condition and in the environment agreed upon between you and us. You are requested not to use our product deviating from such agreement.
- Please keep the distance between transformer/coil and other components (refer to the standard IEC 950).
2410121923_Chilisin-CPY160808T-4R7M-NP_C295681.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
